Testing your new Tool(s)!
-
for me its a over time process, as davek said ,im in the 21st century now :D so i can already see the major improvements to the newer models over the older ones, for me im still learning over all these years, but i wont abuse a tool just to see if i can brake it etc, its all about time for me,
then they become a old trusted tool,paul
-
When I get a new tool at look over it really closely and often with a magnifying glass to see if there are any defects . But I dont actually test them . If its a new model I've not had before I'll use it lightly to start with and get a feel for it i.e does it flex of feel like its going to break .
Dunc
-
No testing as such here, I just really check everything functions OK and that the lock up is good.
-
@Dunc said:
When I get a new tool at look over it really closely and often with a magnifying glass to see if there are any defects
DuncI can see that!

they're having a really interesting "discussion" about a Spydie failure over at BF!
I personally don't understand how someone can "rip" a company for a "rare" mistake or a flaw in something that can happen to anyone/any company? especially when they make it right with warranties and good customer service.
of course repeated problems that don't get address is another animal. that's why we need to "test test test" our stuff ;)
-
Good post, this is why a company with a lifetime warranty is the way to go, break it and you get a new one. That being said when i'm testing my new tools I want to (ab)use the crap out of them, using the tool for its intended purpose and otherwise, even to the point of breaking it. Why? Because I want to know exactly what I can't do with the tool so that I'll know what the tool is really capable of. Whether you use it as a hammer or test the wire cutters on 16 penny nails or whatever, you'll know the limits of your MT.
-
After checking them over , I put em to work , just the mundane stuff .If the thing is naff , it becomes pretty obvious .
Chris
-
resurrecting this thread because the gauntlet test is an inspired idea IMO.
any suggestions would be much appreciated

-
So,I testing my Swisstool and Surge. :)
-
I never really test them, but when I carry a new tool I tend to have my Charge as "backup".
That said I've never had a tool fail on me, as I'm a pen-pusher by trade and rarely put myself in the way of hard work :D
-
I just squeeze the handles to see some flex, shave my finger hair with the blades, and generally play around with a new MT until I cut myself. Just like when I was 10 years old.
-
My tools go to work. If they hold up well the first few times they're used, I'm good with the tool. If it eventually breaks, that's why there's a warranty.
However, if things go elliptical with in the first few times I use it (like the fiddly spring on the Powerlock 1/4 inch driver and the Powerlock can opener bending a bit), then the tool goes to tool purgatory for an unspecified amount of time.
Breaking stuff, I can deal with. PITA design issues, I can't do.
-
we have tested some in water/rain/outside. I like testing the drivers on several screw heads for grip and wear.
I also like bendy/strength test. light batoning, and I always check sharpness and how well blades hold up after use.
scissor test with various materials and thicknesses.
and plier test with it's hold, fit and opening. most I won't push the strength because I don't feel they were made for much (not counting SOG).
-
I work in a warehouse doing manufactoring work. Four cranky machines to keep running as well as whatever else decides to try and give up the ghost. So no testing is done before comming to work for the trial by fire test. If it fails, no worries as I have my back-up Swisstool in my purse.
Really, I've come to use and love my Swisstool. If I buy a different multi its kind of like going to a strip bar...
I will get all excited, but still come back home to my wife. Just makes me want her more. Same with new multi-tools. I'll buy em and play with em. Always come back to the Swisstool. -
I just look them over and start using them. If they have issues it becomes obvious soon enough.
-
@grimm_kaosboy said:
If I buy a different multi its kind of like going to a strip bar...
I will get all excited, but still come back home to my wife. Just makes me want her more.That is just so funny

-
@DaveK said:
I never really test them, but when I carry a new tool I tend to have my Charge as "backup".That said I've never had a tool fail on me, as I'm a pen-pusher by trade and rarely put myself in the way of hard work :D
I do the same thing with my Blast. This is my second(the first is sitting happily in someone's pocket in Montana), It's been used so much it is heading back to LM for some work. I generally inspect every tool I get, but I don't test them per se. I use the crap out of them for everything, cutting paperclips and taking things apart just so I get to put them back together.
-
i don't think cutting paper clips is very testing for a multi..
:D -
-
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login