What can a multitool do?
-
Well, what everyone else has said is right on the money, but here's a few other don'ts:
Don't throw it in a pond/lake...it won't float (I believe someone on here did that to a skeletool I think)
Don't use a Juice SC2 corkscrew to open wine (bad things happen)
Don't use any part of the MT as a pry bar that you lean most or all of your weight on (again, bad things happen):D
-
Put another way , you can wire a few pieces of rebar with a multi , but is you plan to do it 12 hours a day , 6 days a week - better get a pair of kline's .
The advantage is in the flexability , not sustained productivity . They can save yopu a lot of walks to the truck or toolbox .
Chris
-
I doubt that anyone mentioned this one but an MT can fix a Pinata.
This weekend we had my son's open house and for the first time in his life he had a pinata (I know we are bad parents).
Well it seems that one of the teenagers took a swing and caught the rope it tore right out of the top and dropped straight to the ground
without breaking.Taking out the Wave I poked a couple more holes in it ran some zip ties thru it and rehung it shortly after that though it met it maker. ::)
<img src="http://api.photoshop.com/home_d565191d475d4e15af3b0f0ee4e69fde/adobe-px-assets/4144727311c241638ffd25fef3a94b5b" width="4000" height="3000"/>
-
I know my old PST helped me remove a Harley Davidson tail light light lens one night (on the side of the road) to change the burnt out bulb. That's why I like the long Phillips head drivers, not the short bits. The lens's screws are recessed about an 1" in the plastic.
-
In 1998 I was driving cross-country in a Ford Festiva when the fuel filter got plugged up. After a couple of frustrating hours, I was finally able to change it on my own with nothing but my Leatherman PST.
-
@porteiro said:
In 1998 I was driving cross-country in a Ford Festiva when the fuel filter got plugged up. After a couple of frustrating hours, I was finally able to change it on my own with nothing but my Leatherman PST.That is neat, a fuel filter change in an emergency with a multi tool. :) I am thinking about how you did that, my wife and I have a 1994 Ford Escort and the fuel filter for it is on the firewall behind the engine. It is fun to do with a 1/4 drive ratchet and seckot. My hats off to you sir for doing it with a multi tool. :)
-
@threeme2189 said:
Whatever you do, do NOT use it as a hammer!!!

:DUnless it is a ST300. If it had a cord it would be a jackhammer. Stupid big way-too-useful-and-awesome-to-not-carry hunk of steel weighing down my belt......
-
Multitools make great hammers. Just sayin' :)
-
yep ive done that before, only to hammer bits of plastic sorting frames together though :)
-
I used a variety of LM's as hammers to start small nails in drywall for picture hanging at my old job. Then I found it was easier on the tool to just push the nails in holding them with the pliers.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login