New Tool!
-
Oh that's good news. Take care with the bending though - those files are made from very brittle steel.
How did the tip with the bit card go? I could have kicked myself when I eventually figured that one out :D
-
It works better like that I also figured it would go bits out but now I see that I was very wrong :o, I was hoping to get both bitcards in though, but that doesn't seem feasible, not a big deal though I probably don't need all 40 bits on me all the time.
-
Two bit cards would be pushing it a bit I think!
Obvious when you realise which way round it goes isn't it? They should provide instructions for the sheath :D
Looks like you're good to go anyway - hope you like your Charge as much as I do

-
I had the same problem with the diamond file on the charge TTI from cabelas that Bob sent to me. It rubbed against the titanium handle as well.
It does seem like this is not an uncommon complaint :-\
-
Don't get me wrong,I like Charge, .. BUT!...seems like people pay for titanium scales and brand name,and QC is far,far behind.The price for Charge is over $100 !!! The Leatherman needs a better QC for their MTs.
-
I think I have voiced well enough of my concerns over LM QC, but as Davek helped me realize, I was generalizing a statement made from not enough facts. While I have had a lemon or two from the Wave/charge/surge line, I can safely say that my ST300, both Blasts, my micra, and P4 were all perfect tools. I only have the ST300, Blast, and Micra now, the p4 went to Pops as a gift. Moreover, my only actual Lemons were a Charge ALX with a badly ground blade spine(vertical play like you wouldn't believe), and pretty much 2 of the Juices I have owned. SO, that makes it a little unfair to say that Leatherman has bad QC, there just seem to be a few quirks they need to iron out.
-
@Mercury said:
I think I have voiced well enough of my concerns over LM QC, but as Davek helped me realize, I was generalizing a statement made from not enough facts. While I have had a lemon or two from the Wave/charge/surge line, I can safely say that my ST300, both Blasts, my micra, and P4 were all perfect tools. I only have the ST300, Blast, and Micra now, the p4 went to Pops as a gift. Moreover, my only actual Lemons were a Charge ALX with a badly ground blade spine(vertical play like you wouldn't believe), and pretty much 2 of the Juices I have owned. SO, that makes it a little unfair to say that Leatherman has bad QC, there just seem to be a few quirks they need to iron out.Agree,but,what price is for ST300 and Charge?Charge is more expensive and has QC issue.Look at SAK's and Swisstool's,for example,whatever is price range - they ALL IS HIGH QC!Now look at LM,ST300 - good,Blast,Micra - good QC,next - Charge,Surge and etc. not saying its a BAD QC,but its not what I want to see in a MT for a price range over $100!And I read a lot of forums and most people agree that Leatherman QC is going down,especially with high end LM products.
-
Most people? Or is it just a few people who repeat it often?
-
-
Most people? Or is it just a few people who repeat it often?
Dave,:-) its fairly often and not just a few people.
I would hazard a guess that about 75% of the criticism of Leatherman on this site in the last week has come from just you, give or take. You seem to be on some kind of trip to share your limited, and somewhat odd experiences.
Most people? Or is it just a few people who repeat it often?
::)
Not aimed at you :)
-
Most people? Or is it just a few people who repeat it often?
Dave,:-) its fairly often and not just a few people.
I would hazard a guess that about 75% of the criticism of Leatherman on this site in the last week has come from just you, give or take. You seem to be on some kind of trip to share your limited, and somewhat odd experiences.
Most people? Or is it just a few people who repeat it often?
::)
Not aimed at you :)
I'm not criticism a Leatherman,I like it a lot,but WHY Charge cost more than $100 and STILL have a same BAD QC IN ALMOST EVERY UNIT?
-
Most people? Or is it just a few people who repeat it often?
Dave,:-) its fairly often and not just a few people.
I would hazard a guess that about 75% of the criticism of Leatherman on this site in the last week has come from just you, give or take. You seem to be on some kind of trip to share your limited, and somewhat odd experiences.
Most people? Or is it just a few people who repeat it often?
::)
Not aimed at you :)
Just stop it!!! No more polemics :D ,you better tell me about pliers,I mean does a Crimper on pliers feels like a weak point?Or Charge Ti is better here?
-
Most people? Or is it just a few people who repeat it often?
Dave,:-) its fairly often and not just a few people.
I would hazard a guess that about 75% of the criticism of Leatherman on this site in the last week has come from just you, give or take. You seem to be on some kind of trip to share your limited, and somewhat odd experiences.
Most people? Or is it just a few people who repeat it often?
::)
Not aimed at you :)
I'm not criticism a Leatherman,I like it a lot,but WHY Charge cost more than $100 and STILL have a same BAD QC IN ALMOST EVERY UNIT?
I strongly disagree with that wide sweeping generalization.
-
@CumminsDiesel said:
I'm not criticism a Leatherman,I like it a lot,but WHY Charge cost more than $100 and STILL have a same BAD QC IN ALMOST EVERY UNIT?What a ridiculous statement. Answer me honestly - how many "units" do you know about with "bad qc"? 5? 10? How many?
-
I'm not criticism a Leatherman,I like it a lot,but WHY Charge cost more than $100 and STILL have a same BAD QC IN ALMOST EVERY UNIT?
What a ridiculous statement. Answer me honestly - how many "units" do you know about with "bad qc"? 5? 10? How many?
+1 +1 +1 +1 +1
-
I'm not criticism a Leatherman,I like it a lot,but WHY Charge cost more than $100 and STILL have a same BAD QC IN ALMOST EVERY UNIT?
What a ridiculous statement. Answer me honestly - how many "units" do you know about with "bad qc"? 5? 10? How many?
+1 +1 +1 +1 +1
exactly, :D +1+1+1+1+1 and you forgot one more +1 = 6 SURGE's :o and thats just me. -
So, how many Charges then?
-
Most people? Or is it just a few people who repeat it often?
Dave,:-) its fairly often and not just a few people.
I would hazard a guess that about 75% of the criticism of Leatherman on this site in the last week has come from just you, give or take. You seem to be on some kind of trip to share your limited, and somewhat odd experiences.
Most people? Or is it just a few people who repeat it often?
::)
Not aimed at you :)
:D
I know, but this seems to be a xerox of the thread that made me realize I was wrong. It made me smile.
The gist here, Cumminsdeisel, is that it is a ridiculous notion to think that anyone here but Chako has enough of any MT to make statements like the ones you have made. Trust me, I used to sound like you, really I did. But I realized that even owning 2 or 3 of the same model doesn't make a quorum to vote like that. You simply cannot back up the statement that you made. How do you know they have bad QC in almost every unit? You don't.
And on the pliers note, I would venture to say that they have been putting cap crimpers in their tools for a long time. If it was a weak point, it wouldn't have made it this long. I bet you break the pivot point before you break the pliers at the crimper.
6 surges is not enough to make those allegations. The solution: STOP BUYING SURGES! It is obviously not the tool for you. Try an ST300, I love mine! Plus I have heard that despite the weight, the Surge isn't as robust as the ST300.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login