Swisstools the different models
-
Nothin' wrong with a Swisstool

-
i dont know id be happy with tools at the hardness they ar eit is soft, but the blade is thin andyou can push it through things if it is blunt also because of the thin edge it can be sharpened very quickly..
sure the vic and wenger tools aint great steel , but they are not meant for whittling hardwoods or carving bone ,, theyer pocket knifes for lite use.. knife blade steel is fine in their multitools also.... it stays sharp long enough, if it i were to hard then theyed proably have a few broken blades and would cost the $ in warrenty $ due to the thinness of the blade and its shape.. also it would add costs to the amount of stones they buy per year.. and theyed add that to the price of the knives,... the vic butchers knives are soft as hell, but look most butchers dont even sharpen the knives properly only thin them out on a corse stone and steel them, if they were hard the butchers would have trouble...
id like it if victorinox and wenger made some pocket knives with better harder steel.. remember good only british pen knives many are 59-61 rockwell.. (same with surgical knives.. ) you can see this by the chips in their blades...
you can ben a vic blade and it wont spring back.. same with their kitchen and butcher knives... for me this is no problem... as they arnt ment to be hard and making them soft sames money on grinding stones and so keeps the price lower.. (wenger and victorinox are very well prices for their knives compared to knives from other makers that have insane quality problems... like many pen knives from europe and u.s. that cost more.. and are softer and poorer steel and most have many defects in the one knife.. for bad machine work )i would like to know how hard the toold head is as a good plier head should be in the high 50 rockwells.. like 57 -59.. it cshould be hard enought to chip and not fold,
2 things id like address on the vic multitoo are
1 , sand blast the screwdriver tips so the stick in the screws and not slip, who the hell polishes a screwdriver tip?? makes no common sence..
maybe ever titanium oxide coat the tips ,.. to help it stick to the scrwew heads.. although sand blasting would be enouth..2 make it so it is easy to remove broken tools or to remove tools one dosnt need and replace them with tools you want.....
.
I used my swisstool knife very hard and not sharpen it yet,its still very sharp,so I don't know what you mean about soft steel in Vic Wenger.They can't be wrong over 100 years,believe me.

I think even the most loyal Victorinox users would concede that the blade steel used is "soft" compared to some of the steels used in other multitools and knives, and many like that because it makes it so easy to sharpen. It's not necessarily a criticism, just an observation.
@Magic Bus said:
Nothin' wrong with a Swisstool
Quite ;)
-
Pure curiosity, but I would love to see some accurate numbers relating to relative hardness between Vic and Leatherman

-
I think Vic steel is quite soft but like Dave said its not a bad thing . It makes the blades easy to sharpen .This would also explain why Vic tools tend to bend rather then snap and also why its easy to misshapen the phillips driver .It also explains their high rust resistance .
This is in no way a criticism and I wouldn't want vic blades any other way .
Dunc
-
@Dunc said:
I think Vic steel is quite soft but like Dave said its not a bad thing . It makes the blades easy to sharpen .This would also explain why Vic tools tend to bend rather then snap and also why its easy to misshapen the phillips driver .It also explains their high rust resistance .This is in no way a criticism and I wouldn't want vic blades any other way .
Dunc
I did bend the smallest flat driver on a Swisstool once although I was being unkind to it. My Swisstool is here to stay but I wouldn't mind having an ST300 to compare :)
-
@Magic Bus said:
I think Vic steel is quite soft but like Dave said its not a bad thing . It makes the blades easy to sharpen .This would also explain why Vic tools tend to bend rather then snap and also why its easy to misshapen the phillips driver .It also explains their high rust resistance .
This is in no way a criticism and I wouldn't want vic blades any other way .
Dunc
I did bend the smallest flat driver on a Swisstool once although I was being unkind to it. My Swisstool is here to stay but I wouldn't mind having an ST300 to compare :)
Yes I've yet to try a ST300 , I would be very interested to see how they compare .
Dunc
-
@Magic Bus said:
I think Vic steel is quite soft but like Dave said its not a bad thing . It makes the blades easy to sharpen .This would also explain why Vic tools tend to bend rather then snap and also why its easy to misshapen the phillips driver .It also explains their high rust resistance .
This is in no way a criticism and I wouldn't want vic blades any other way .
Dunc
I did bend the smallest flat driver on a Swisstool once although I was being unkind to it. My Swisstool is here to stay but I wouldn't mind having an ST300 to compare :)
Yes I've yet to try a ST300 , I would be very interested to see how they compare .
Dunc
Tell you what Dunc. If we club together and buy one it'll be cheaper for both of us and the ST300 could spend
mosttime with me and then go on it's holidays to Sea Palling
;) -
Ahh joint custody , not sure if it is equitable though
:D :D :D -
which one of the swiss tools would be goo for hunting. like repairing your gun or cleaning your bird or deer an other game.
-
I have to say that my swisstool is turning out to be a very handy tool, i leave it in the kitchen when im not edc'ing it in my bag and angie has used it a few times and said that she likes it compared to the wave as that scares her ::) for her to show a interest is something special :D the drivers are not as bad as i thought they might be, there still a little slippy but ok, so far so good,

-
where would you find the different models of knifes old or new. the reason why is I saw an orange handle one an would love to know where to get one. also know if there is a book on them.
-
I have a Swisstool as well as a Spirit X, and Ifind either one of them totally compatible with either hunting or hiking when it comes to any sort of chore that requires a little PMCS or something along those lines.. I do notice a little slipping also in the drivers because of the polishing but nothing a little patience can't fix..
Cheers,
Serge -
The Stainless Swisstool now comes with a more aggressive file, probably in response to the complaints about the original very mild file. Does anyone know when this new aggressive file was incorporated into the Stainless Swisstool?
Do all Swisstools on sale today have the newer aggressive file?
-
@carl said:
The Stainless Swisstool now comes with a more aggressive file, probably in response to the complaints about the original very mild file. Does anyone know when this new aggressive file was incorporated into the Stainless Swisstool?Do all Swisstools on sale today have the newer aggressive file?
I don't know when the new one came into being but my 02 style head has a newer type .This doesn't mean that all 02 plier heads might have it .
AS for your question about all swisstools on sale today I would say no . There are many in shops and some have been sitting there for years . I often see 98 plier head tools in stores .So if you do buy a new one try and find out which model it is .
The strange thing is I prefer the older 98 pliers but I do like the new file .Dunc
-
My Stainless Swisstool which I purchased in 2008 has the old file. In late 2008 or early 2009 we started seeing reports of the newer aggressive file showing up on the BO model first. The stainless model must have received the newer file afterwards.
When did you purchase your new file stainless model?
-
Carl my stainless models are the old type 98 plier heads . What plier head is your model ? you can find out in this thread .....
Different Swisstool plier heads , the truth
Many of us on here have wondered about why the pliers on the Swisstool have changed , for instance in this picture by Jsews ( Bob ) Well all this talk abou...
Multitool.Org Forum (multitool.ninja)
Dunc
-
Its got the 2005 head, I purchased in 2008 but still has the old file.
-
Maybe but the question is, will I get one with a newer file if I buy one now? How long is a reasonable amount of time to expect the old stock to have been cleared out?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login