What tools do you really need?
-
drivers, mainly the Phillips, the pliers and the wire cutter, lanyard loop, file, but everything else gets used now and then, :D
-
@macguyver said:
i can see you using the knife and screw drivers, but needle nose pliers are just about the worst thing for any kind of bolts etc. I would think that using needle nose would increase the chance of damaging bolts screws or other things that a dedicated tool would surpass a needle nose inAs an engineer I hate to see any pliers being used on nuts and bolts, that's what spanners are for people!
:D As you say macguyver, they'll do the job in a pinch but they're really not the right tool for it.My multitool "must haves" change depending on where I am. At work screwdrivers, pliers and file are a must. Out and about it's scissors, screwdrivers and a occasional bottle opener that I'll be looking for. :)
-
i can see you using the knife and screw drivers, but needle nose pliers are just about the worst thing for any kind of bolts etc. I would think that using needle nose would increase the chance of damaging bolts screws or other things that a dedicated tool would surpass a needle nose in
As an engineer I hate to see any pliers being used on nuts and bolts, that's what spanners are for people!
:D As you say macguyver, they'll do the job in a pinch but they're really not the right tool for it.My multitool "must haves" change depending on where I am. At work screwdrivers, pliers and file are a must. Out and about it's scissors, screwdrivers and a occasional bottle opener that I'll be looking for. :)
thats the bane of any maintenance engineers life mangled nuts and bolts and stripped screw heads
on a tool i reckon i need drivers the most, then wire cutters, a knive and file id like an awl too in the half year ive had my charge i havent once used the saw, apart from testing it
-
never thought I'd need can openers but I am away from them a lot now and I usually plow through a can of beans for dinner.
Philips is used the most by Kmarr
Followed by scissors
I've been SAKing lately so I guess I don't use pliers as much as I thought
-
@macguyver said:
I travel a lot and have used my mt on nndumerous occassions to get me out of some rough spots. I honestly don't use mt tools around the house except to pull out staples and what not. I prefer to use dedicated tools.In my opinion in sh*t hit the fan or when yhou have no other choice except for mt tools. In my opinion the following tools are needed and they have to be solid next to bomb proof.
1.Pliers
**
2. screw driver, the bit driver on the wave is a great concept but the its really to short to tight spots. I.E. radiator hose clamps.**-
SAW both metal and wood.
-
file used to keep fixed blade and other tools sharp
-
large prybar
6 awl.
I was wondering what you guy e would consider a must have and what are nice to have.
Beg to differ. During the back to back blizzards in Feb this year (50" dumped in 1 week's time, 28 then 22 inches), our Ford tractor's waterpump died while plowing the second dump. Not only did I remove and install the new waterpump with my Charge ALX as the screwdriver, but when it was clear one of the short bypass hoses was leaking just a bit, it was the Charge ALX which tightened down the clamps just a bit more. The only screws it doesn't reach are the ones down narrow plastic holes.
@Gareth said:
As an engineer I hate to see any pliers being used on nuts and bolts, that's what spanners are for people!
:DHence the beauty of the Guppie. :D (or Funnybone)
Must haves on the farm:
- Pliers
- Something to cut twine (Raker ring tool works fine, for example)
- Screwdrivers/Bit drivers
- Saw (Metal/wood)
- File
- Wrench (spanner)
- Flashlight (torch)
If I have a pliers, I have a prybar (and wedge!)... :D
That list will get most things fixed enough to get back to the shop where dedicated tools live.
-
-
well for most situations I am in:
- Pliers (too useful to not have close by)
- Drivers (Phillips, Robertson, Large Flathead [maybe very small flathead too if it can be slipped on a different tool])
- Scissors (though my charge has none)
maybe an awl, I used my spirits quite a bit
Hmm, I guess a charge with surge scissors instead of the saw or serrated blade, and inside having a large flathead, dedicated phillips on one side, **and **bitdriver with awl on the other side would be near perfect. 2 dedicated drivers and bitdriver would be bold but so dang useful.
-
Ok if we're talking wilderness survival, a set up similar to the Surge is pretty great! I love the changeable blades, and with the bit holder and an extender the screw driver options are close to infinite. I have a couple extra jig saw blades in a tube that are about 5" long so the short saw isn't too much of a problem.
at work or in an urban setting i don't think the perfect multi has been made.
forged pliers
screw drivers(preferably interchangeable in some way)
a ratcheting socket holder(I have an idea how to make this work, just need a machine shop and an engineer to run it) ::)
a prying tool
marlin spike(separate from a really sharp awl)
No knife blade( I always carry a dedicated folder or two) -
taking notes as we speak... >:D
-
I won't address what capabilities a multitool should have. Instead, here are the tools I use most often, in order of frequency of use:
lanyard attachment point - I installed a split ring through this so I can grab the tool and remove it easily from the holster.
knife blade
scissors
pliers
screwdriver(s)
filelesser used tools:
awl
sawI rarely use a can or bottle opener and never use a cork screw.
-
I carry a Wave, a Micra, or a Vic Super Tinker, sometimes a combo of all. This is what I've found myself using fairly frequently.
Knife (Wave's OHO plain edge usually)
Phillips driver (usually the Wave's bit driver, but occasionally the Super Tinker's longer driver)
Scissors
Awl (Used a lot for small home repairs where getting out the drill bits would be a pain)
Saw (usually on random saplings and tree limbs, but sometimes for small workwork just out of convenience)
Wire cuttersRarely used:
Can opener (used the Wave's a few days ago, just to use it. Always have better options.)
Eyeglasses screwdriver (The Micra's sometimes gets used to loosen certain lock screws. The Wave's never gets used, as it's too bulky.)
Reamer hole on awl
Any wire stripper notch -
MT like th swisstool, surge and st 300 are ultra cool and tough but they can get heavy. Sometimes you just want a mini pocket tool but at the same time I want the basic tool that going to get me through a bad situation. One of the things that I think a good mt should have is a pair of tweezers. I can't tell you how many times I've had difficulty pulling splinters out.
-
I have found that even the largest MT is not a heavy load at all. Once it is in its sheath on the belt, the weight is negligible.
Anyhow, I don't use a knife due to work restrictions, so the scissors do the cutting duties. I will say, the small pair found on the knifeless Fuse can cut just about anything I have asked them to.
I am also the computer contact. Prior to the Fuse, I was always scrabbling for dedicated tools. It was a major pain in the keister and a huge time waster. Precious time that I simply didn't have at work. The Knifeless Fuse was a Godsend, and the best $ ever spent.
- Needle nose pliers.
- Screwdrivers (Both Phillip and flat).
- Scissors.
- On rare occasions, a file.
- Can opener used on rare occasions when the shape is needed. It hasn't opened any cans yet though. :D
If the Fuse had a small built in LED light to peer into dark corners, it would be the perfect MT for my daily needs.
-
screwdriver, pliers, knife. I carry a Skeletool while working, saves quite a few trips to the tool locker.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login