Leatherman Skeletool
-
The Skeletool certainly has the coolness factor 8) as well as being so lightweight

Perfect for minimal EDC :D


-
Hi everybody,
I'm currently hesitating between buying a Skeletool CX with semi-serrated blade (old version) or a Skeletool CX with PE blade (new version). I read the article about the Skeletools but I'm still not decided
. I would like your opinion about the semi-serrated blade, have you tested it in action ? A lot of people swear by this kind of blade, and others say that there is generally not enough serration to be really effective. Is the Plain part enough long to be efficient too on a semi serrated skeletool ? If you have tested both, which is the best to you for a all day use ?Thanks a lot !
-
how do you use the bit driver on the skeletools? have one handle at an angle or use it when the pliers open? :S sorry for the stupid question
-
I've had my Skeletool, plain stainless with plain blade since June of 2008. Great tool, serves my need well. It's very easy to carry with the pocket clip, and a lot lighter than the PST that it replaced.
-
I'm currently hesitating between buying a Skeletool CX with semi-serrated blade (old version) or a Skeletool CX with PE blade (new version). I read the article about the Skeletools but I'm still not decided
. I would like your opinion about the semi-serrated blade, have you tested it in action ? A lot of people swear by this kind of blade, and others say that there is generally not enough serration to be really effective. Is the Plain part enough long to be efficient too on a semi serrated skeletool ? If you have tested both, which is the best to you for a all day use ?Thanks a lot !
Hi Juicebox,
Welcome to Multitool.org

At the beginning I was unsure of the combo blade on the CX but it was a really good price and it was the CX after all so I had to have it :D
This combo blade has grown on me and I have had no problems with it. I haven't tested it to the full but it has no problems so far
I suppose it depends on what you'll ultimately using it for. Perhaps the part serrated blade maybe a useful addition or it may get in the way and be a pain to sharpen.
At the begining I did think 'what a useless tool, all you get is a blade, pliers, a bit driver and carabiner bottle opener. For that price I could get loads more tools' Then I got it :ahhh How wrong I was. It is had been my 'illegal' EDC quite a few times; it is just so lightweight. The tools it has cover you for most situations

I have no regrets with my Skeletool CX; I would like to get a CX with a plain edge blade at some point as well :D
-
The problem with having two edge on a blade this size is there isn't enough PE left to slice anything, like if you are trying to cut open a plastic bag cleanly chances are you'll run out of PE and start snagging and ripping with SE. The advantage is the serration can start a cut easier and keep ripping even when it's not very sharp.
-
I have a Skeletool , its an early one and was given to me by a friend and I will always hold it dear to me ( you know who you are :P ) . Its seen lots of pocket time and is ideal for lightweight carry . Would love to see a slipjoint version for the UK .Great design and build quality .
Dunc
-
I have a Skeletool CX, and I was contemplated to purchase a Freestyle CX just so that I could swap the blades. However, on second thought, I rather have the combo edge.
Sometimes, you just need that serrations to bite into sinewy things, and be glad to have it. ;)
-
I bought a Skeletool CX about a year and a half ago and I prefer the combination of straight and serrated blade. Although the CX is a lighter weight tool (I have the Charge AL for heavy stuff), I still prefer the CX. It is a cool looking tool and the carabiner is great to hang on a belt loop or backpack. If you have the choice, get the CX with the serratwed edge blade. My 2cents. (change, please?)
-
I believe newer Skeletool CX comes with factory-fitted PE 154CM blade. A note on Leatherman.com Warranty page states that if one returns the Skeletool CX for warranty, the PE 154CM blade may or may not be fitted.
-
@Raze said:
**I believe newer Skeletool CX comes with factory-fitted PE 154CM blade. **A note on Leatherman.com Warranty page states that if one returns the Skeletool CX for warranty, the PE 154CM blade may or may not be fitted.That's absolutely right. They announced this change when Freestyle was released last year - however there are so many of the old blade shapes still on shelves, that it's a bit of a lottery if you order online at the moment - you could get either!
Personally, I carry a Skeletool CX whilst out walking, and quite like the options that a part serrated blade gives you. Both the serrated and PE parts of the blade are big enough to be useful IMO.
-
I also have a Skeletool CX and I have to say Gasp!, that I'm really not a big fan of it..
I find it digs into your hand, is very limited in its functions, and although looks rather cool, is kinda a chore to carry..
The drivers slip on most chores, and the pliers I fear would snap if I really tried to use them for anything than fixing a zipper on a camelbak..
If I'm going to carry a "shortie" MT, I now prefer either my Juice S2 or CS4 since I really don't need a oho main locking blade of great steel for most EDC.
Also for those of you which may have any "John Law" concerns when it comes to concealed carry, a Juice is a hell of allot less intimidating and logical to have on your persons than a skeletool..
Now if it had scissors and an awl, I might change my opinion, but to me and my day to day usesm it really can't do too much.. I will give it an "A" in the looks cool dept.
Plus when wearing jeans, a Juice slips very neatly into the little "zippo" pocket with such ease you don't even know that its there.. Just my two..
Cheers,
Serge -
@sergemaster said:
The drivers slip on most chores, and the pliers I fear would snap if I really tried to use them for anything than fixing a zipper on a camelbak..Can't agree with any of that I'm afraid. The drivers are as capable as any mid-sized multitool I've come across and are the same as used on the Wave, Charge and Surge and the pliers are every bit as strong as the Juice :)
-
Yeah,the LM drivers is the best what I see in MT

-
**** "" and the pliers I fear would snap if I really tried to use them for anything than fixing a zipper on a camelbak.. "" ****
I use my Squirt P4 pliers,they are very useful,whats wrong with Skeletool pliers?
-
The Skeletool keeps finding its way into my pocket. I find it a very useful tool. It has a certain 8) factor also.
-
Amici,
Have we all forgotten this post from not that long ago?/topic/11172
As for the bit changer, when I attempted to screw in your typical 1" phillips and flathead screw through some pine paneling, it constantly kicked out as I attempted to drive them both in..
Cheers,
Serge -
@sergemaster said:
Amici,
Have we all forgotten this post from not that long ago?/topic/11172
As for the bit changer, when I attempted to screw in your typical 1" phillips and flathead screw through some pine paneling, it constantly kicked out as I attempted to drive them both in..
Cheers,
SergeGiven enough time, I could find you a picture of just about every multitool ever made with broken pliers - it hardly classifies them as weak. With these cast pliers, you can get faults that lead to breakages. Myself, I have used a Skeletool for many, many tasks that amount to more than you suggested, and they're still fine. Clearly, they are lightweight and not designed for heavy duty use, but strength to size they are very tough indeed.
As for the bit driver, maybe it's your technique? Again, I use these bits frequently on several different Leatherman multitools (including the Leatherman Kick I modified recently), and they hold their own against any other multitool driver with one or two exceptions. If yours kept kicking out, I'd guess you had the wrong size bit in there, or you were simply expecting too much of it?
-
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login


