Style CS already apart.....
-
Nice work Evil!

-
Great mod there mate.
Just wondering, is the awl locking in any way? -
may be a stupid question, but seeing how similar the wl and blade are (apart from the serrated section), why have them both? They both have sharp edges, and a point. Have you made the awl out of a different material so its tip will not snap off where a knife tip would?
-
Looks like the awl is chisel ground, and has a thicker, more triangular shape at the tip. It would be a stronger reamer just by dint of the shape. The knife would be a lot better for precise cutting.
Can't wait to see what ends up on the second layer!
-
@Nikos said:
Great mod there mate.
Just wondering, is the awl locking in any way?Unfortunately no, it does not lock... but then again neither does the one on my Juice and have been getting along with it just fine. You can control how firmly it snaps into place by the shape of the curve and hump that rubs against the tab. I oversized the profile of these on both the knife and the awl so they are under a bit more pressure than the standard knife so they snap into place quite firmly. I would say they stay in place comparable to the tools on my Juice. I have no doubt it will handle the small tasks I ask of it. I am never too far from another multitool with an even larger more substantial awl. If I come across another CS, I already have ideas for a liner locked blade.....
@Raukodur said:
may be a stupid question, but seeing how similar the awl and blade are (apart from the serrated section), why have them both? They both have sharp edges, and a point. Have you made the awl out of a different material so its tip will not snap off where a knife tip would?*It's not a stupid question and am glad you asked. Even half a year ago, I would of asked the exact same question. As stated, for years awls were the most UN-used item on my multitools... never used them. Never really saw the point in them. SlackOne was spot on with his comment. While they may look similar, they are quite different. The knife has a primary bevel along the whole belly that tapers very thin which would be more prone to chipping depending on the task. Also, it is sharpened with a double edge to be razor sharp for more precise cutting... very sharp but not as resilient to damage. The awl is chisel ground. The thickness from the back to the belly remains the same until it reaches the sharpened edge. This thickness is carried on all the way to the tip. This makes it a much stronger and stout tool for such things as poking, reaming, drilling pilot holes, etc. Also, the grind angle is very different. It only takes one broken tip on your favorite knife to fully appreciate the usefulness of an awl. I am constantly drilling and reaming holes in wood, plastic and aluminum panels. All too often a hole will need to be opened up to a precise diameter and often in places a typical drill would not fit.. The acute angle of the tip of an awl gives you better control over this. No sense in hauling around a drill for simple drilling tasks that you can accomplish with an awl. Hope this better explained things.....
~ evil ~*
-
"Because I can" is a perfectly acceptable answer you know Evil? :D
-
I agree.... awls are really useful

-
I LOVE Awls :D :D. It is the main reason I just keep coming back to the Vic Spirit , its awl is just tops for pilot holes 8) 8).
+1 on broken blade tips >:( >:( >:(.
Looking forward to the rest of the project evil

-
I agree on awls. They're underappreciated, but the world is better the more of them that are around. The first time I used one to drill a pilot hole for a wood screw, it was a major "OOOOOH, that's what it's for!" moment. The Wave gets demerits for not having one, and I'm antsy that the custom SAK I want to build won't have one...
I like Evil's awls. They double as bayonets :)
-
@SlackOne said:
I agree on awls. They're underappreciated, but the world is better the more of them that are around. The first time I used one to drill a pilot hole for a wood screw, it was a major "OOOOOH, that's what it's for!" moment. The Wave gets demerits for not having one, and I'm antsy that the custom SAK I want to build won't have one...I like Evil's awls. They double as bayonets :)
*Here's one for ya SlackOne... My super-sized wickedly sharp awl that I fabricated for my Wave. It dwarfs the awl of a Surge.....(standard Surge, that is. Wait til you see what I've got planned for my Surge in the future ;) )
~ evil ~*


-
Yeah, that's the one I was thinking of. I think I could awl through my house with that one :D
looks at his Wave, shaking his finger See what his Wave did? And what do you bring to the game? A useless mini driver. Bad Wave! Bad!
-
Wow! Now, that is what I call a tactical awl!! Heheh.
Seriously now, that's awesomely great work Evil510!

-
Evil, I'm just wondering...what kind of steel are you using for those awls anyways? And are you getting it as sheet steel at the thickness you want to begin with, or are you working it down? I have a pretty great idea for an awl that I doubt I could actually execute, but dreaming is fun :P
-
*Hey SlackOne. The new blade and awl for the Style CS I fabricated out of 440C stainless. The monster awl I fabricated for my Wave is ATS-34... (very similar to 154CM)... good stuff. For some of my other mods, I have used D2 toolsteel as well as chrome vanadium. I could get most of these as sheets but not very economical since I don't mass produce anything... just one-off type projects. I get them as blade blanks, typically about 1-1/2"x12" in various thicknesses. The awl in my Wave makes the Surge awl look tiny, so I am already in the planning stages for the new awl for my Surge... I am thinking BG-42 would be very nice. Even the scissors I fabricated for my Wave make Surge scissors look small, but it will probably be quite a while before I decide to tackle making another set of scissors as it was quite an undertaking.....
~ evil ~*
-
Not an expert modder like y'all are, but one thing that irked me right off on the Style CS was the personal nail file.
Unless someone was desperate for a screwdriver that nail file is all wrong. Should been like the Squirt S4 (top) where one could clean the gunk out from fingernails, or to pry up a sliver in which to grab better with them horrible tweezers.
(Micra's tweezers are the best so far!)My Squirt S4's scales have gotten beaten up so not as good looking like newer the Style CS. When I'm out looking for a job or before an interview, or whenever, I like to keep my nails in check.

So went to work on the Style CS nail file (bottom) and made a much more friendlier nail cleaner tip. Files on both sides do as the metal has squared (sharp) corners - better for underside nail cleaning.
-
*Good going with the mod there Xelkos. I like to keep my nails in check too.....
In the process of getting replacement tweezers so I can get back on this project again.....~ evil ~*
-
The next thing this brought to mind was taking a style and using it on the side of a style cs, but I think the space the file and scissors are in is where the the handles would have to meet with the tool head.
-
Save
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login