Thoughts on Gerber Octane
-
Great first post mate, and welcome to the forum

-
Before you grind notches, be sure that the way you flick open the pliers will be compatible with this. The opening method depicted in the directions that come with the Gerber, and the way 90% of people open them up if you go by Youtube, would not be possible with locking notches.
Also, check this post, first. I've already done this mod, but I also lengthened the rails. You might wanna see if there's some room for improvement on the Octane, too, before cutting the notches in place. (The tip of the Compact Sport normally sticks out about 1/3" when closed, and can easily put a hole in a pocket.)
/topic/19667
I think the Octane will serve you well. The Gerber slide pliers are my favorite needle nose pliers in a full-size MT, because of the handles NOT angled too far outwards like all the others. I'd probably get one, if I didn't already have a couple Compact Sports. And a Pro Scout. And... Well, nice review, anyway! Post up some pics in the Mod Squad forum after you've spun up your Dremel. :)
-
That is an excellent first post - welcome dbnyc

I've not even handled an Octane yet - let alone owned one, but I'm alarmed that the pliers do not lock open. Am I understanding correctly, that if you were to push down on the pliers they would close, without the need to disengage them somehow? Or do the handles act as a lock / stop in some way?
-
They lock open. However, they do not lock closed. Personally, I would find that a bother to have to press the two buttons to open the tool. I much prefer to one hand open it by flicking it...very convenient.
Welcome dbnyc to the forums. Good write up. :)
-
I always preferred to open it by holding the tool by the buttons, pliers pointing up. Press in on the buttons lightly (not too hard), and the tool slides open by gravity. It closes one-handed, the same way, if you turn it upside down. Or if you have any coordination, you can flick it up, against gravity.
-
@kl27x said:
I always preferred to open it by holding the tool by the buttons, pliers pointing up. Press in on the buttons lightly (not too hard), and the tool slides open by gravity. It closes one-handed, the same way, if you turn it upside down. Or if you have any coordination, you can flick it up, against gravity.That's what I do with my MP400 / 600s. That or hold them at the base and let centrifugal force do the work for me!
@Chako - thanks for that - that makes more sense!
-
The Octane is definitely growing on me and I have decided to keep it. I'm still planning to mod it to lock in the closed/undeployed position though.
Like kl27x I prefer the gravity assist method to open, so no worries about the lock notches interfering with opening. Also, the plier head retracts completely into the body so I won't need to lengthen the rails, not that there's much space to do so anyway. You could probably only get about 1mm extra before the slider hits the lock buttons.
Nice work on that Compact Sport mod kl27x, it looks like it came from the factory that way.
Speaking of Octane modding it would be interesting if Gerber played with this outboard tool slot a bit and offered other tools (nice big pair of scissors, file, some sort of combi tool) in that location in place of a blade.
-
Here's a quick update - I've stopped pocket carrying my Octane because it is now falling open all the time when it's clipped in my pocket. The plier head just drops right out at the slightest provocation, and the handle opens up. I haven't had the time to add the lock cutouts in the handles yet (maybe this weekend...)
I can't help but think that this is a serious design flaw in the product, though as I've learned more about the history of the sliding plier design I can see why Gerber would have done it this way.
So anyway, the Octane is shelved until I can fix it.
-
That's a shame :(
I need to get one of these and see for myself I think !
-
Just used the bubble package opener for the first time - it is awesome. Zip zip zip, and open - fastest I've ever opened one of these things.
Fittingly, I was opening the dremel burr set I'm going to be using to grind my lock notches.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login