SuperJuice KFS4
-
Yep, makes me wish I went into tool making :D
-
I'm not a machinist, so there might be an obvious answer, but would some grease/lube be useful in preventing the galling?
-
Damn I'm impressed! Other than being able to spell "titanium" I wouldn't have the slightest idea of where to start something like that. Nice work buddy!

-
@J-sews said:
Then things were proceeding nicely again, until it became apparent that my pivot screws are too short. :'( The ones I bought from www.knifekits.com are one half inch long:
Unfortunately, it appears they need to be just a little bit longer. :( These are already the longest ones knifekits sells, so I'll have to make my own.
Just curiously, what diameter are the pivot pins?
I have a coupla semi-børked Juices, and have been considering a layer mod, and really REALLY didn't wanna have to deal with peening pins!
(Before anybody asks: Knife, Scissors+Bottle Opener, Saw (yes, saw)+Awl, File. No serrated knife, no freakin' corkscrew. Basically, a KF4 with scissors instead of the serrated blade.)
I'm betting they're prolly some 300-series stainless. Too bad you couldn't harden them...
-
AMAZING!
-
@MultiMat said:
WOWSERS Bob , that is looking Brilliant :drool: :drool: :drool:I have been wondering about how hard it would be to put a thumb stud on a Buck110 I have on the way. Sounds a bit tricky :(
Bob GREAT work mate :salute: :salute:
You have seen these right? I have some and they work great on my 110's.
http://www.britishblades.com/forums/showthread.php?89890-EZ-Stud
-
WOWSERS Bob , that is looking Brilliant :drool: :drool: :drool:
I have been wondering about how hard it would be to put a thumb stud on a Buck110 I have on the way. Sounds a bit tricky :(
Bob GREAT work mate :salute: :salute:
You have seen these right? I have some and they work great on my 110's.
http://www.britishblades.com/forums/showthread.php?89890-EZ-Stud
No I have not :o.
Thanks Sean I will try & track one down mate :cheers: :cheers:BTW BOB what is going on with the project :pok: :pok: :pok:
-
WOWSERS Bob , that is looking Brilliant :drool: :drool: :drool:
I have been wondering about how hard it would be to put a thumb stud on a Buck110 I have on the way. Sounds a bit tricky :(
Bob GREAT work mate :salute: :salute:
You have seen these right? I have some and they work great on my 110's.
http://www.britishblades.com/forums/showthread.php?89890-EZ-Stud
No I have not :o.
Thanks Sean I will try & track one down mate :cheers: :cheers:BTW BOB what is going on with the project :pok: :pok: :pok:
Nothing. :-\ Not one darn iota of progress in the last month, due to all the equipment at work being tied up on "company business." ::) (sigh) But I'll be back on it soon enough. :)
-
@J-sews said:
Then things were proceeding nicely again, until it became apparent that my pivot screws are too short. :'( The ones I bought from www.knifekits.com are one half inch long:
Unfortunately, it appears they need to be just a little bit longer. :( These are already the longest ones knifekits sells, so I'll have to make my own.
Just curiously, what diameter are the pivot pins?
I have a coupla semi-børked Juices, and have been considering a layer mod, and really REALLY didn't wanna have to deal with peening pins!
(Before anybody asks: Knife, Scissors+Bottle Opener, Saw (yes, saw)+Awl, File. No serrated knife, no freakin' corkscrew. Basically, a KF4 with scissors instead of the serrated blade.)
I'm betting they're prolly some 300-series stainless. Too bad you couldn't harden them...
The Juice pins are 5/32 (or .156") in diameter. Unfortunately though, they are just slightly too short to work on a tool of Kf4 thickness. :( You would have to drop one whole layer in order for these pins to work. >:(
I'm not willing to do that, so I'll be making my own (longer) ones out of brass. I'll crank out a few extras if you want. :)
-

made the new pins yet bob?
-

made the new pins yet bob?
Yeah, what he said

Nope. :( All the machinery at work is tied up right now doing "company" work. :P
-
*Hats off to you, your Juice mod is turning out absolutely great
You pay attention to detail, much like myself. I am a big fan of thumbstuds. Looking forward to seeing it completed.....~ evil ~*
-
GOD that is awesome work ... BRAVO!
-
Just think how great it will be if I ever get a chance to* finish * it! ::) ::) :D
-
i think we need to convince your employers that this is much more important than what they are working on...
i cant wait to see how this turns out.
pre-order 3 for me
-
dont you have any machinery at your house? :D
-
I'm thinking of starting a SuperJuicy Bob fan club...
...if he ever finishes it ::)
-
ahem bob....
Quote from: J-sews on July 18, 2010, 01:42:32 pm
Not a bit Ryan, but thanks for the prodding . I'll get back to working on it this week
Bob
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
