Design Talk : About flashlights
-
Good simple user interface , if a clicky - a well engineered one . Ruggedness , HAIII , and a pocket as good as the McGizmo clips .
Chris
-
Thank you!
Then, what's the MAX length / diameter you can accept? -
For EDC carry the ARC AAA & the Fenix E01 are very popular here in the USA. The Preon 1 also is popular. Some people want to see the ARC AA be produced again. For EDC smaller is better.
-
@neoseikan said:
Thank you!
Then, what's the MAX length / diameter you can accept?100mm would be a good length for most people :)
And as narrow as possible

-
There is a plan for mini EDC lights:
800mA output into a CREE XP-G LED.
Single 16340 / 18650 battery.
1~3 brightness levels.Will that be a good config?
-
Readily available batteries, small outer dimensions, and a loooooong-lasting low output are the make-or-break factors for me, and I'm really picky with those two. That said, I'm not sure about that 16340/18650 requirement... :-\
-
@neoseikan said:
There is a plan for mini EDC lights:800mA output into a CREE XP-G LED.
Single 16340 / 18650 battery.
1~3 brightness levels.Will that be a good config?
IMO, 16340 isn't really a worthwhile option. Even the best ones I have owned (AW brand) couldn't store more than ~550mAH of energy. 18650 is a much better option, storing 2200mAH (or more) in a package just a bit more than twice the size of a 16340. 16340 will only give you ~40 minutes of runtime at 800mA. 18650 will give you ~2.5 hours runtime at 800mA. Actual runtimes would vary with the efficiency of the driver, but 18650 will always give you roughly 4 times the runtime of a 16340.
If you want to have the ability to run Li-Ion w/CR123 Lithium primary as backup, I would suggest an 18650 format light that is also compatible with the higher voltage of 2xCR123. For a small EDC light to run Li-Ion, my preference is to run a 14500 in an AA format light, since 14500 has better energy storage capacity than 16340. LSD NiMH can be used for backup in that case, or you can use AA lithium primary such as Energizer L91 if you can afford them, and you could even use alkaline in a pinch.
Of course, there are other options such as the 4Sevens Quark that will allow you to swap bodies, and therefore run many cell options in one light. For instance, a 2xAA quark will allow these options:
2xAA (NiMH, NiCd secondary, or Lithium, Alkaline primary)
1XAA (NiMH, NiCd secondary, or Lithium, Alkaline primary)
1XCR123 (Lithium primary)
1x16340 (Li-Ion secondary)
1x17670 (Li-Ion secondary)
1x18650 (Li-Ion secondary) -
@space cowboy said:
For EDC smaller is better.Well, to a degree, yes. The problem for me is that I can't justify carrying AAA as a primary EDC when AA gives me almost three times the runtime at the same brightness level. AAA lights are indeed small, but the QMiNi AA in my pocket is only 78mm long. I do carry an ARC AAA-P Snow or Fenix E01 around my neck for backup though, and I can run the QMiNi on AAA if I need to.
-
@space cowboy said:
For EDC smaller is better.
Well, to a degree, yes. The problem for me is that I can't justify carrying AAA as a primary EDC when AA gives me almost three times the runtime at the same brightness level. AAA lights are indeed small, but the QMiNi AA in my pocket is only 78mm long. I do carry an ARC AAA-P Snow Fenix E01 around my neck for backup though, and I can run the QMiNi on AAA if I need to.
Just tried that with mine :D
God I love this torch

-
Then, Why not just use CR2?
Small, enough of energy. Right? -
I need at least 2 lights to fit my needs
One has to be small, offer long runtime on very low (2-5 lumen), and a high setting as bright as possible. no SOS, no strobe, no discoball. Just 2 levels of light! AAA or 1 CR123a. clicky or twisty, but I prefer clickys
The other one can be larger, 1x18650 size. A real thrower, 100m of useable range at least. VERY bright, at least 200 real lumen. maybe an optional second mode, about 5-10 lumen to read a map or something (but I would have the other light to do that kind of things). It needs to be still pocketable, no huge monster!
For I do not have found 2 lights to fit the bill by now I carry 3 lights:
A Fenix E01 for keychain EDC
a Surefire E1B for main EDC lightand a Lumapower M1 when I need a thrower.
-
I like stuff about the size of a McLux III PD or a Surefire E1B . Anything smaller is just too fiddly and would be relegated to backup duty . CR2 is OK for keychain lights , but not for work .
Chris
-
How about a side by side 2 X 18650 mini light.
-
@neoseikan said:
How about a side by side 2 X 18650 mini light.Hardly mini 2 x 18650 is it?
it would be quite bulky >:( but you would have loooong run time and option for lots of power out if needed. :D -
How about a side by side 2 X 18650 mini light.
Hardly mini 2 x 18650 is it?
it would be quite bulky >:( but you would have loooong run time and option for lots of power out if needed. :DIndeed. but it will looks like a small glasses box, easy to put into pocket/bag, won't rotate.
-
How about a side by side 2 X 18650 mini light.
Hardly mini 2 x 18650 is it?
it would be quite bulky >:( but you would have loooong run time and option for lots of power out if needed. :DIndeed. but it will looks like a small glasses box, easy to put into pocket/bag, won't rotate.
Ah oval shape battery compartment, interesting :D
-
To be honest you'd be really restricting your market by making a torch that runs on anything but AAA, AA or to a lesser extent CR123 :-\
-
@Mike, Lord of the Spammers! said:
To be honest you'd be really restricting your market by making a torch that runs on anything but AAA, AA or to a lesser extent CR123 :-\+1
I think any market is hard in the flashlight world as most seats are taken by already established manufacturers including 18650,that's not to say you can't take a small slice of the cake if you listen to and build a light around what the customer really wants

-
@neoseikan said:
Then, Why not just use CR2?
Small, enough of energy. Right?Small, yes. Terrible energy storage for rechargables. I personally only run secondary (rechargable) batteries in EDC lights.
-
Oh come on guys. The market for 100$ lights is quite small now, someone who gets a 100$ Chinese made light does not care for AA or AAA batteries. It would be a fan and flashaholic light. Surefire just has one AA light and sells well - but quite some users would prefer 18650 over 2xCr123a in a Surefire light. I guess a 100$ 2x 18650 side by side light might sell well - for it is new and an offering to flashaholics. A really powerfull well made long lasting light might be an option for my EDC needs. Make it a thrower (optics, am oval or 8-shaped reflector seems weird), ad a well made side clicky and a second, very low, setting, and I´ll get one.
I´d love to see one of those 2x18650 lights having at least 400 lumen on high, not more than 10 on low, no bullsmurf modes like strobe or SOS.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login