Octane mod
-
Now after remove the blade layer
-
can't see any pics
-
They were working before the forum upgrade earlier. I am not sure maybe it is just temporary.
-
Pics are working for me

Do the screwdrivers still work on the side where you removed the blade pivot screw?
-
Did you just create a bladeless Octane? I might have to get one and add it to /topic/15711
-
Yes J-sews the pin is hex shaped on the end where the blade pin attached so it cannot spin freely and the screwhead on the other side keeps it from falling apart. I am not sure how it does this as I did not remove the other pin but it appears that it does not affect the performance of the tools.
-
ari6126, sounds good to me a bladeless octane. I just did not like the uneven look and feel of the blade being there. I am jus glad the mod was as simple as just removing one pin.
-
I did this mod to my Octane tonight. I read this thread before buying the Octane and being able to go bladeless was a factor in my purchase, due to NYC knife laws. The recent crackdown on retailers has got me worried about walking around the city with my Octane clipped to my pocket so I finally decided to do the mod tonight.
I have a #8 torx but it promptly stripped the screw head, so I went and got my universal bolt remover, a 7" vice grip. This had no problem but further dinged up the screw head and gouged up the aluminum side cover. I see what looks like blue Loctite on the screw threads which explains the difficulty. So beware if you're thinking of doing this that it may be a one-way operation, or at least isn't a clean & pretty one. (You may be handier with tools than I am however...)
I'm sorry to lose the stylish red blade cover but the tool now is super skinny and really does just disappear in the pocket.
The only problem is that the blade backstop, a bent tab of the handle body that sticks out below the pivot, is left poking out of the side of the handle ready to tear up my hand when I reach into my pocket. I'm thinking I may really make this a one-way mod and grind the thing off. I'll carry my new skinny Bladeless Octane tomorrow and see how it feels.
Thanks to Tsquare for the original idea and for posting about it! Pictures tomorrow.
-db
-
If anyone is wondering about the law in question, it's this:
It's illegal if it is a
- "Gravity knife" means any
knife has blade which is released from the handle or
sheath thereof by the force of gravity of the application
of centrifugal force which, when released, is locked in
place by means of a button, spring, lever, or other
device. [Note: In NYC, and potentially in other NY
jurisdictions, this definition is construed to apply to
ANY folding knife with a blade that locks open. ]
That's just ridiculous.
- "Gravity knife" means any
-
Here's my Bladeless Octane. You can see a before picture here in my other mod thread /post/386253

Here's the bits. Screw, washer, lock bar, blade, blade cover. You can see the mess I made of the blade cover with my vise grip. Also note the little bump at the bottom inside corner of the lock bar. That fits into dimples on the other side of the blade for the blade detent and half stop (next picture.)

The other side of the bits. You can see the dimples in the blade, the larger is for the closing detent and the smaller for the half stop. You can see the tabs on the blade cover and the lock bar that fit in the slots in the handle. I forgot to put the washer in this picture.

And here's the blade backstop poky bit that I'm thinking of removing, definitely presents a hazard in the pocket. Sorry about the lint, I'll remember to clean things up before the big photo shoot next time.

-
Remind me not to move to NY...

-
Cool mod. Add another handle to the tidbits and you have a nice linerlock folder.

-
Well I decided I'm not going to put the blade back on so I chopped the blade backstop tab off to make it safe to use my pocket again. Gerber should make a NYC version of the Octane with scissors instead of a blade there.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login