Charge AL
-
Hey,
Just purchased a charge al today and have found the wire cutters to be a bit on the lame side as they are scissor action rather than like a bolt cutters/most cutting pliers where the two cutting edges meet head on. Has this been a problem for anyone? as i found cutting thin materiel electrical cable,thin wire and the like. it seems to 'fold' between and separate the jaws like a bad pair of scissors would.
Just hoping this is normal and i didn't buy a fake.
Also noted a rolled over portion on the main blade just before the belly and i cant see what would have caused it, but this is my first lm so oppions are more than welcome .
cheers
-
Hmm ive had lots of LM's and TBH ive always found there cutter the best, possibly a QC issue ?
paul
-
@Zed said:
Hmm ive had lots of LM's and TBH ive always found there cutter the best, possibly a QC issue ?paul
I hope not, have you tried cutting say speaker wire?
i am loving everything else just the knife blade and wire cutters in the pliers is giving me nightmares.
I have know idea why they would make the cutters scissor action, i dot see many(if any) purpose built pliers with scissor action cutters. the scissor action gives nothing performance wise so i cant understand LM's logic behind the design,when cutters from purpose built tools have proven they work.
I am a victim of 'hype' :(
-
Hmm ive had lots of LM's and TBH ive always found there cutter the best, possibly a QC issue ?
paul
I hope not, have you tried cutting say speaker wire?
i am loving everything else just the knife blade and wire cutters in the pliers is giving me nightmares.
I have know idea why they would make the cutters scissor action, i dot see many(if any) purpose built pliers with scissor action cutters. the scissor action gives nothing performance wise so i cant understand LM's logic behind the design,when cutters from purpose built tools have proven they work.
I am a victim of 'hype' :(
ive cut bicycle spokes with mine :D
-
Hmm ive had lots of LM's and TBH ive always found there cutter the best, possibly a QC issue ?
paul
I hope not, have you tried cutting say speaker wire?
i am loving everything else just the knife blade and wire cutters in the pliers is giving me nightmares.
I have know idea why they would make the cutters scissor action, i dot see many(if any) purpose built pliers with scissor action cutters. the scissor action gives nothing performance wise so i cant understand LM's logic behind the design,when cutters from purpose built tools have proven they work.
I am a victim of 'hype' :(
ive cut bicycle spokes with mine :D
well they are allot harder and thicker.
-
most of the cutters on multi tools the cutters cross over. A few come together as you mention like a pair of
side cutters but most of my tools leatherman, sog, gerber are like you put it like scissors. :) -
I've only heard of one tool (I think it was a Gerber?) that had the v-style cutters as opposed to bypass-style cutters ???
-
They are made to cut like scissors. If the cutters can cleanly cut through a peice of paper, there are no quality issues.
-
I have a Charge TTI, when it was brand new about more or less a half a decade ago I have no problem with the wire cutter, it cut through standard size wires, stereo wirings and more or less any electrical wirings. But As years of use comes (I sometimes abuse the tool) I noticed some play on the pliers, cutting through standard wires are pkay but cutting through soft electrical wire is the problem it pinches between the wire cutters.
Do you notice any plier head play? -
@infection said:
Hey,Just purchased a charge al today and have found the wire cutters to be a bit on the lame side as they are scissor action rather than like a bolt cutters/most cutting pliers where the two cutting edges meet head on. Has this been a problem for anyone? as i found cutting thin materiel electrical cable,thin wire and the like. it seems to 'fold' between and separate the jaws like a bad pair of scissors would.
Just hoping this is normal and i didn't buy a fake.
Also noted a rolled over portion on the main blade just before the belly and i cant see what would have caused it, but this is my first lm so oppions are more than welcome .
cheers
If that is a new tool, then it could be a QC issue.
My Charge can't cut soft, stranded wire cleanly, but this is expected since it has developed play on the plier head pivot due to regular use. Same goes for my Vic STX.
My newer Wave on the other hand has a tighter pivot, and can cleanly cut the same kind of wire (and even paper) without folding or jamming in the cutter jaws.
-
I would also say check for plier pivot play - it should be tight, and the blades of the wire cutter should be coming together extremely close. If the plier head is at all loose, you may have just ended up with a dud. It should be covered under the warranty if the pivot is loose, though.
-
@markn951 said:
I've only heard of one tool (I think it was a Gerber?) that had the v-style cutters as opposed to bypass-style cutters ???Yeah the GERBER Flik and the Freehand have this type of cutter... But on those MT's, the cutters aren't much better than the regular cutters on Leathermans. In fact on my particular Flik, the cutters kind of suck.
<u>To the OP:</u>
@genevabuck said:
They are made to cut like scissors. If the cutters can cleanly cut through a peice of paper, there are no quality issues.I agree...
Since it's a new tool; try cutting paper with the wire cutters.. it should cut it... If it doesn't, them maybe you should send it to LM for a repair/replacement of the loose or misaligned plier heads.
The Charge series are great tools...not just "Hyped" based on nothing, there's a lot of talk about them because of their great reputation; which IMHO they have earned.
-
just had that same problem today with my charge alx, while trying to cut light stranded cable. the cable kept pinching in between the cutters and not cutting. i was furious by that failure. the stranded cable should have been no challange at all but the charge just totally failed.
so yes while the cutters can handle some serious wire cutting, they fail at soft stranded.
-
**Leatherman Charge AL & thin stranded wire.
**

My Charge is relatively new and the pliers are still tight and aligned...I don't know why your LM's aren't cutting it.
Maybe the pliers are loose just by a little; it would only take a light misalignment or small error in the grind of the cutters to let a few wires slip in.It's a little odd that the Surge and the Super Tools have a dedicated stranded wire cutter in the back yet the Wave & Charge don't.
Hope this helps
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login