What Did You Use Your Multitool For Today?
-
Nothing exciting here. Used the Skeletool to help get into a socket set case that was being stubborn. Used the Chigger to pry open the back of my Photon Freedom to change batteries and open a bottle of orange Crush.
-
I used my vic soldier awl to drill two holes into my wall and plug them with plastic anchors, then the phillips on my blast to screw in the mounting screws for my new corkboard. both performed flawlessly. I then proceeded to begin my sideclip polishing project by testing my wheel on the clip, got it red hot, and used the clip to melt some skin off my hand quite by accident. It um, also performed flawlessly, as my middle finger is currently bandaged and throbbing. Note to self, use something to grip the part you are polishing next time instead of your bare hand.
::) -
Used my Leatherman BLAST's mini philips driver to remove the tiny screws that hold the pocket clip on my Dereelight CL1H v.3 flashlight.

In the beginning I thought of those mini drivers as little to no use items... Every couple of days I use them and like them more... -
Oh yeah...
I used my new Skeletool...to....em..

Nothing...I just played with it...because it's new...Ah who an I kidding...I was playing with my MP600 just before that..... and that was my 1st MT purchase...
-
I use the nailcleaner-flathead/phillips head combo on the nailfile of my style CS to unscrew a couple of socket covers in the employee lounge

-
Used the Wave to rewire a light switch to be on the other side of a room. Cutting wire, stripping, lots of wire bending, screwplates, the whole shebang. I have learned that the Wave is a handy-dandy tool to have for such small repairs, but stripping a lot of wire with that awkward stripper geegaw would get old pretty fast.
-
I use the hardwire notch on the wire cutters for stripping. Quicker and easier.
-
Opened a parcel with my Spartan. No, there was no knife and no tool inside... just a small emergency bag and kneepads that I ordered loooooong ago in february

-
Today I used my wave and shaved with it.
Seriously.
it actually worked quite well..
-
used the farmer's awl to put a new hole in my belt (no I'm not getting thinner, just bought the wrong sized belt :)).
-
Amici,
Today I used my SOG Powerlock to unbolt and remove a set of louvers covering the rear window of my car since it was going in for a wash and I wanted a nice clean rear window!Cheers,
Serge -
At 85 MPH, we heard a dragging sound outside the car. This has been a recurring problem where the plastic moulding under the front of the car was torn and pieces of it drag on the ground. I used my ST300 pliers and cutters along with my Gerber Exchange-A-Blade razor knife to cut off the offending piece so we could continue the ride home. Thanks Leatherman and Gerber!

-
I used the flat head in my Super Tinker to pry a laptop plug out of a live wall socket.
Surprisingly, I lived to make this post.
-
@turbov21 said:
I used the flat head in my Super Tinker to pry a laptop plug out of a live wall socket.
**
Surprisingly, I lived to make this post.**
Well my Spirit X has been hard at work this week helping me with some cable pulling (installing new data lines and power). So plenty of cable cutting/stripping, cutting cable ties, prying, cutting/filing plastic trunking, making breakfast, screwing, etc etc.
-
My wife used my BO Kick yesterday.
Not sure what for but something to do with the old washing machine as she went out and bought new one. I am now £600 lighter....... it even plays a tune when you turn it on and off. 
-
@thundernoodle said:
My wife used my BO Kick yesterday.
Not sure what for but something to do with the old washing machine as she went out and bought new one. I am now £600 lighter....... it even plays a tune when you turn it on and off. 
600£ for a new BO Kick... :ahhh :ahhh I'll sell you mine for half of that.. ;)
:D :D
-
£600 for the new washing machine not the kick lol. 
-
hard core use of a skeletool today helping setting up a wedding. The tool's a champ guys!
-
i found a use for the really tiny flathead screwdriver on the juice.
I installed a new control switch for a whole house fan, and needed to adjust the speed settings. the tiny little adjustment setter thing is too small and recessed to be able to use the bit driver on the charge.
i thought to myself: what do i do?
out came the juice s2 and lo and behold the smallest of the flatheads on the tool was just the right size!
i have decided that the purpose of there being such a small driver on the tool was for setting adjustments. later i tried the medium driver as a sprinkler adjustment, which sort of worked. but for sprinkler head adjustment its hard to beat the genus.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login