New Champion?
-
Don't forget good ole reliable Felinevet!
-
So guys here is the question with my new Champ Plus, pocket or pouch? My old Super Tinker which I got the Champ Plus to upgrade from was small enough to carry comfortably in my pocket. With my new Champ Plus well my girlfriend just thinks I am happy to see her. I did order last night from Amazon a belt pouch with a sharpening steel that says it is designed to fit the Champ. I presume it will hold the Champ Plus since it is a little smaller less the pliers. Champ Plus is getting some quality pocket time now. I work in a professional office environment but it is a computer one so wearing a pouch isn't a big issue. It also keeps pocket lint crap out of it. Wonder what your views are on this?
-
I think a champ is about the max you want to go where pocket carry is concerned, you can get away with it, but it is a bulky little thing :)
I tend to use these Vic key couplers, so my saks are suspended inside my pockets, rather at the bottom of the pockets were your constantly aware of them bashing into you >:(

-
Well I've ordered a pouch/sheath. So I will have options. A tool does seem to stay cleaner in one. But then my girlfriend can think I am packing some serious heat. This pouch has a sharpener. I wonder what grit it is? 600 to 750 I've found is best for a utility edge. Then sharpening is a whole other thing. Do you want a saw edge or a mirror edge. I usually use a 10x loupe to check that my bevel is good and I got a good clean edge. When they come with a sharpener they seldom say what the grit is. It says a sharpening steel but my bet is it's a diamond sharpening stick. A true steel doesn't sharpen but straightens the edge, subtle but distinct difference.
-
@FredKJ said:
Well I've ordered a pouch/sheath. So I will have options. A tool does seem to stay cleaner in one. But then my girlfriend can think I am packing some serious heat. This pouch has a sharpener. I wonder what grit it is? 600 to 750 I've found is best for a utility edge. Then sharpening is a whole other thing. Do you want a saw edge or a mirror edge. I usually use a 10x loupe to check that my bevel is good and I got a good clean edge. When they come with a sharpener they seldom say what the grit is. It says a sharpening steel but my bet is it's a diamond sharpening stick. A true steel doesn't sharpen but straightens the edge, subtle but distinct difference.I've got one of those stones, and there pretty much medium/fine, rather than one type of grit, at a guess I'd say it was 600 ish, but I stand to be corrected on that :)
-
@micky d said:
Well I've ordered a pouch/sheath. So I will have options. A tool does seem to stay cleaner in one. But then my girlfriend can think I am packing some serious heat. This pouch has a sharpener. I wonder what grit it is? 600 to 750 I've found is best for a utility edge. Then sharpening is a whole other thing. Do you want a saw edge or a mirror edge. I usually use a 10x loupe to check that my bevel is good and I got a good clean edge. When they come with a sharpener they seldom say what the grit is. It says a sharpening steel but my bet is it's a diamond sharpening stick. A true steel doesn't sharpen but straightens the edge, subtle but distinct difference.
I've got one of those stones, and there pretty much medium/fine, rather than one type of grit, at a guess I'd say it was 600 ish, but I stand to be corrected on that :)
I hate it when I see people over sharpen. A good blade taken care of should last a long time. I only use a 300 grit when I am dressing a bevel to change it or repair damage. A few strokes occasionally with 600 or 750 grit will keep an edge. Some people just sharpen the blade away. On a utility blade I usually keep a "saw" edge which is more practical than a mirror one. How you intend to use a blade determines how you sharpen it.
One thing I noticed on the Champ Plus over my older Super Tinker is that the scissors no longer uses a screw. That's nice. The screw always seems to work loose and I have to tighten it.
-
I do tend to put a mirror polish on my blades, but that's just me being finicky :D
I don't know when they changed the scissors, but like you I'm glad they did, as it seems everyone had a bit of a problem of the screw working itself loose ::)
-
@micky d said:
I do tend to put a mirror polich on my blades, but that's just me being finicky :DI don't know when they changed the scissors, but like you I'm glad they did, as it seems everyone had a bit of a problem of the screw working itself loose ::)
That was definitely a design improvement. I'm glad to see they did that with the scissors.
A saw edge works better for cutting string/cord/rope but a mirror edge is better for push cutting. Since I do a lot of cord cutting with my SAK I go for a push forward sharpening to get a saw edge. I'd use a more circular sharpening stroke for a mirror edge. But then when I go for a mirror edge I prefer to go to a 1000 or 1200 grit. I have a seperate 3 blade pen knife which I have a flatter bevel on that I use for whittling. That I keep a mirror edge on. For utility purposes which I have the SAK for I go for that saw edge. It's not being finicky. It's about what you will use it for most. It's pretty easy to change back and forth between a saw or mirror edge if your needs change providing you have the bevel dressed well. I have a 10x triplet loupe to check my edge. I find that essential to make sure I have the edge I want.
-
Mind you it's a little academic where sak blades are concerned, there thin blades will slice though most mediums, even when the edge is past it's best
-
They make a nice general purpose edge. If I want a really fine mirror edge I find a cheap sharpening option is getting some 1600 grit mylar sandpaper. You cut it into about 2 inch squares and set a stack of them on a piece of cardboard cut the same size. I keep them on with a rubberband. You then use a circular sharpening stroke on it. When one paper wears out you just pull it off and go to the next. The loupe I use is a Belomo 10x triplet. It's made in Belorus and you can get it on the internet for under $15 usually. It is comparable in quality to a Bausch & Lomb which costs three times as much. It really lets you see what is going on with your edge. With it I don't guess if I have the edge right, I know.
-
I haveI have several ways to sharpen knives, only one or two of which is effective. Of the two I use the most, on takes a long time but can put a decent edge on. The other I usually use at work when I don't have a lot of time. It's quick and easy, but the edge is average. If you-know-what hits the fan, I'll use a Stanley knife (utility blade?). That has never happened though, because I always have more than enough sharp blades on hand, so I usually don't even have to use the sharpener (with the exception of when I sharpen my coworkers' Chinese knives).
-
For Christmas I got this new sharpener that I was skeptical about at first, but it works marvelously! Hair-shaving in five minutes- maximum!
-
Oh, yeah!
It's called the "Samurai Shark".
Not the best name, in my opinion, but it works!
-
I don't know, I ignore him (Just kidding).
Never heard him talking about it, though. Or read, rather.
By the way, it's one of those "As seen on TV" deals, but it actually works pretty well.
Probably not as good as a Sharpmaker, but it's still good enough. For me, at least.
-
@Viper said:
I don't know, I ignore him (Just kidding).
Never heard him talking about it, though. Or read, rather.
By the way, it's one of those "As seen on TV" deals, but it actually works!
Probably not as well as a Sharpmaker, but it's still pretty darn good.
Bet it was cheaper than a sharpmaker though :D
-
Probably just a tad!
I'm not even thinking about complaining, though. It was free, after all.
-
I'll probably end up getting one, but not for a while.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login