Show off your Sak mod's!
-
@altered.ego said:
Here's another one. My old Huntsman has new wooden scales. :)



nice work mate .

-
Nice Ben.
I'm guessing you like the Phillips rather than the corkscrew then? :D -
You reckon :D
Nice to see a Sportsman converted, its another configuration that I'm surprised isn't done by Victorinox.
-
-
@porteiro said:
What wood is that, and what kind of stain/finish did you use?Sorry for my late reply, porteiro. It's just a piece of old wood i found in the woodshed. I was going to pay a visit to one of the local woodworkers and get some qaulity wood, but it was a weekend when i started. I used watercolors to paint the wood, a mixture of red, black and orange to be exact and sanded it down a bit to give it a nice looking texture. As for the finish, it's a clear matt varnish spray, but unfortunately i used too many layers, so a week or so ago I removed the scales, sanded them again and only used two layers of varnish. Looks much better now. :)
Thanks, guys! If it wasn't for this thread, I probably wouldn't start making my own scales.

-
This is my recycled chip point Trail Guide with pocket clip. I made this SAK all out of extra parts. I refinished + scales they were badly mangled. The pocket clip screws ware salvaged from a 5.00 folding box cutter. I reshaped the blade just for the heck of it.
Mike


-
Brilliantly nice work, altered.ego!

-
Mike, have you tapped the liner or is that clip just attached to the scale?
-
The clip is attached to to the scale. I make the holes in the scales a little small and take my time making the threads then i counter sink the back side of the holes. I attach the clip using J-B Weld under the clip, on the threads and on the counter sunk areas on the back of the holes. The clip is very sturdy.
Mike -
Let us know how it holds up day to day. I'd be a bit paranoid about not sinking the screws into the liner but that's just me :)
-
I have done a few like this my grandson has one i did a few years ago and it is holding up fine.
Mike
-
Good to hear. Just me being paranoid as per usual :D
-
@Mike 56 said:
The clip is attached to to the scale. I make the holes in the scales a little small and take my time making the threads then i counter sink the back side of the holes. I attach the clip using J-B Weld under the clip, on the threads and on the counter sunk areas on the back of the holes. The clip is very sturdy.
MikeThat sounds like a good solution mate. Nice SAK too.

-
The latest arrival thanks to Mr. Bee :D. My pics did'nt turn out well so needed to borrow one of his.


-
Good looking mod that, even with the icky serrations :D
-
I'm actually considering a serrated main blade for my own 84mm knife after doing that for Dennis. Its a small blade and serrations give you that bit more to work with.
-
I can finally post here :D
My compact with saw,what to call it?
note:the old school PAT mini driver,cheers Neil ;)
-
Congrats John, glad you stuck at it

Neil, that Alox is lovely mate.... please keep me on your waiting list :D
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login



:D