Surge getting the axe?
-
@MultiMat said:
I reckon the Surge is going to end up with the ST300's plier head & all will tremble at it's feet
:D :D :DIt would be a shame to see the Surge discontinued as it is definitely one of my all time favorite multitools. I have a newfound love for my Surge ever since I modded them with the ST300 head. I no longer hesitate to try and cut anything. There were times when I would hold back, wondering whether or not I would be making notches on the Surge head by cutting something too hard. With the ST300 head installed, the cutting blades are expendable. I can either sharpen or replace them. It was definitely worth the time and effort. For any of those who haven't read the original post on this mod, yes, the handles close all of the way ;)

-
wow...the surge is pretty new IIRC... then again I would like to see some going with the flow in terms of skeletool/freestyle/MUT type tools. a civilian MUT would be the dogs smurf!
-
I reckon the Surge is going to end up with the ST300's plier head & all will tremble at it's feet
:D :D :DIt would be a shame to see the Surge discontinued as it is definitely one of my all time favorite multitools. I have a newfound love for my Surge ever since I modded them with the ST300 head. I no longer hesitate to try and cut anything. There were times when I would hold back, wondering whether or not I would be making notches on the Surge head by cutting something too hard. With the ST300 head installed, the cutting blades are expendable. I can either sharpen or replace them. It was definitely worth the time and effort. For any of those who haven't read the original post on this mod, yes, the handles close all of the way ;)

Nice mod!
What kind of shims you use for handle pivot bolts?
A thin brass washer,same like LM use for their multitools? -
If it is discontinued, it has yet to be listed in the Retired Tools section of the Leatherman website:
http://www.leatherman.com/family/multi-tools/Retired_Tools
They are usually pretty good about listing things there as soon as the axe is dropped.
Def
-
I want an axe head slapped on the end of a Leatherman tool now...
-
@jekostas said:
It would be odd if it was - they're sold at Wal-Mart as well, and I haven't seen any clearance sales there.My walmart did away with the surge a year ago, I remember getting one for around $30. I promptly traded it. They replaced it in the display with a Core, and they still sell just the Wave, Core, and Skeletool.
-
It would be odd if it was - they're sold at Wal-Mart as well, and I haven't seen any clearance sales there.
My walmart did away with the surge a year ago, I remember getting one for around $30. I promptly traded it. They replaced it in the display with a Core, and they still sell just the Wave, Core, and Skeletool.
Lol funny, my walmart cleared out core, dropped wave to add surge.
-
It would be odd if it was - they're sold at Wal-Mart as well, and I haven't seen any clearance sales there.
My walmart did away with the surge a year ago, I remember getting one for around $30. I promptly traded it. They replaced it in the display with a Core, and they still sell just the Wave, Core, and Skeletool.
Lol funny, my walmart cleared out core, dropped wave to add surge.
dropped the WAVE?! Do they have any idea of what people want?!?! :ahhh :ahhh
-
@CumminsDiesel said:
Nice mod!
What kind of shims you use for handle pivot bolts?
A thin brass washer,same like LM use for their multitools?Actually, I made them out of .005 inch stainless (all I had at the time). I just acquired a sheet of .008 bronze for the sole purpose of making washers for all of my projects. Should have enough material to make washers for quite a long time to come ;)
-
Evil,
After seeing several of your mods in all their evilness, I think your Surge was one of the best you've done..I said it once and I'll say it again, if LM had the foresight and tapped you as part of their R&D team, they would have a much easier time racing to the finish line in the MT business..
Cheers,
Serge -
multimat that would be a truly awesome thing to combine both of them
-
@patrickgt said:
multimat that would be a truly awesome thing to combine both of themMate Evil510 has already done it 8) 8) 8) 8) , I hope Leatherman can make it available for mere mortals

click here--->EVIL'S WICKED SUPER SURGE
-
@BIG-TARGET said:
THEORY!!!!Maybe they're not just doing away with the Surge, but possibly in the works, a "SURGE 2.0" to replace it?

It needs to be done. I'm sure I'll catch hell for this, but I think the surge was done wrong. Instead of making a huge wave with beefed up implements, Leatherman instead made this combination of heavy duty and medium/light duty implements. The surge didn't work for me because while it was suitable in some respects(heavy pliers, knife blades, and some nice scissors), other implements like the bit driver setup and the blade exchanger thing were not tough enough to be on such a tool. I don't even know why the eyeglass screwdriver was there. To me, it offered little too little over the wave for it's size and the core was a better heavy use tool.
If leatherman was to make a surge 2.0 here's what I think needs to be done. Take the standard surge frame with the supertool 300 pliers head. Use the exact outside blade configuration found on the wave. Replace the eyeglass screwdriver with the medium flat head from the core(or something similar), the large bit driver with a phillips screwdriver, and the can opener with a small screwdriver. If a person want scissors, the awl could be dropped for that. Maybe my idea is too radical, but I think if the surge is to be considered a heavy duty multitool, this setup might make more sense.
-
THEORY!!!!
Maybe they're not just doing away with the Surge, but possibly in the works, a "SURGE 2.0" to replace it?

It needs to be done. I'm sure I'll catch hell for this, but I think the surge was done wrong. Instead of making a huge wave with beefed up implements, Leatherman instead made this combination of heavy duty and medium/light duty implements. The surge didn't work for me because while it was suitable in some respects(heavy pliers, knife blades, and some nice scissors), other implements like the bit driver setup and the blade exchanger thing were not tough enough to be on such a tool. I don't even know why the eyeglass screwdriver was there. To me, it offered little too little over the wave for it's size and the core was a better heavy use tool.
If leatherman was to make a surge 2.0 here's what I think needs to be done. Take the standard surge frame with the supertool 300 pliers head. Use the exact outside blade configuration found on the wave. Replace the eyeglass screwdriver with the medium flat head from the core(or something similar), the large bit driver with a phillips screwdriver, and the can opener with a small screwdriver. If a person want scissors, the awl could be dropped for that. Maybe my idea is too radical, but I think if the surge is to be considered a heavy duty multitool, this setup might make more sense.
I think a "Surge 2.0" should be built on a MUT platform:
Serious hammer on the end, Supertool 300 pliers head, outside opening blades, file and saw like on the wave, bit driver and maybe an insulated driver (when working with electricity) and extendable magnetic tip for (a) holding screws in awkward positions and (b) retrieving things dropped in walls and such.
-
Amici,
I know alot of folks love the ST300 plier head but the one used on the Surge do seem to be made from thicker stock indicating they should be stronger as well agree?Cheers,
Serge -
I'm not so sure about the surge plier being stronger, as the ST300 plier head has been widened to reinforce it...

-
@Mr. Whippy said:
THEORY!!!!
Maybe they're not just doing away with the Surge, but possibly in the works, a "SURGE 2.0" to replace it?

It needs to be done. I'm sure I'll catch hell for this, but I think the surge was done wrong. Instead of making a huge wave with beefed up implements, Leatherman instead made this combination of heavy duty and medium/light duty implements. The surge didn't work for me because while it was suitable in some respects(heavy pliers, knife blades, and some nice scissors), other implements like the bit driver setup and the blade exchanger thing were not tough enough to be on such a tool. I don't even know why the eyeglass screwdriver was there. To me, it offered little too little over the wave for it's size and the core was a better heavy use tool.
If leatherman was to make a surge 2.0 here's what I think needs to be done. Take the standard surge frame with the supertool 300 pliers head. Use the exact outside blade configuration found on the wave. Replace the eyeglass screwdriver with the medium flat head from the core(or something similar), the large bit driver with a phillips screwdriver, and the can opener with a small screwdriver. If a person want scissors, the awl could be dropped for that. Maybe my idea is too radical, but I think if the surge is to be considered a heavy duty multitool, this setup might make more sense.
I think a "Surge 2.0" should be built on a MUT platform:
Serious hammer on the end, Supertool 300 pliers head, outside opening blades, file and saw like on the wave, bit driver and maybe an insulated driver (when working with electricity) and extendable magnetic tip for (a) holding screws in awkward positions and (b) retrieving things dropped in walls and such.
That sounds like an incredible idea. I would LOVE to see that.
Edit: Oh, actually I said the same thing as you did a page ago
, no wonder I was like "Yeah this guy knows what he's talking about!" 
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login






