marbles 'safety axe'
-
That's a lovely looking hatchet alright

I'd soak it in linseed oil rather than water though mate, and probably put a new wedge in to

-
Agreed on the linseed oil, soaking in water is a very short term solution, it'll just dry out again putting you back to square one. If it's more than a tiny bit of movement then, as Mike says, a new wedge might be in order. It's a good looking hatchet mate and I like the safety feature, do you notice it under your fingers when you're chopping?
-
@Gareth said:
Agreed on the linseed oil, soaking in water is a very short term solution, it'll just dry out again putting you back to square one. If it's more than a tiny bit of movement then, as Mike says, a new wedge might be in order. It's a good looking hatchet mate and I like the safety feature, do you notice it under your fingers when you're chopping?definately gonna try the linseed oil. it makes way too much sense. the movement is very small actually and i have considered using J B weld but it's not that bad yet.
i haven't used it much at all but i don't notice the safety under my fingers during use. i like the way it drives through material better than my machete plus it does'nt get stuck the way the machete can. it will continue to see very limited use all the same. if something needs a whack around the yard i'll find something to do it good and proper.

-
Marbles was a fine old maker in the Michigan north country.
Their knives, compasses, match safes, etc were legendary. That safety ax is worth a pretty penny in the condition it's in. 
(the new ones are crap BTW, imported from China) :P
-
@J-sews said:
Marbles was a fine old maker in the Michigan north country.
Their knives, compasses, match safes, etc were legendary. That safety ax is worth a pretty penny in the condition it's in. 
(the new ones are crap BTW, imported from China) :P
though it does'nt say 'made in china' on it anywhere i suspect that it was. i bought it about 4 years ago NIB on an impulse. i'm guessing the name was lisenced or contracted for a production run.
what makes them crap? the steel in the bit too soft? i haven't used it enough to say for sure. if something needs chopping (like making kindling) i use my axe. you get more return for the effort.
here's a good question. does anyone use a hatchete anymore? would'nt a heavy long knife like a BK2 be more convenient and practical for average use?
-
I use a hatchet quite a bit now, and in preference to a knife now that I've used one a fair bit and got used to there idiosyncrasies :)
-
Yup, I use a hatchet quite a bit when out and about. I'd much rather have a hatchet and a small fixed blade than one big knife, it's a much more versatile combo in my experience.
BTW Mike, how are you getting on with that Husqvarna?
-
It's been a good field tool so far mate :) I still reckon the head's made of iron judging by the weight :D
Certainly earned it's keep

-
@Mike, Lord of the Spammers! said:
I use a hatchet quite a bit now, and in preference to a knife now that I've used one a fair bit and got used to there idiosyncrasies :)i differ to your better judgement. i'm in the process of soaking the 'marbles' in linseed oil (as well as a few other tools), on your recommendation. at this point the bit seems ok and compaired to my axe bit seems more secure. the axe has seen some heavy use though. to the point of being neglected.
this is worthy of a pass around IMO. i'm open to shiping to the 1st person. the last person should ship to me. all i need is a correct address. PM me with the particulars. the only stipulation is that the hachete needs to be used in a real world real invironment. pics would be helpful if not a requirement. send it to the next person in the condition you found it and use the hell out of it (as best you can), if you can. anyone up to this? personally i would get a gas out of it. better still to compare it to the origional but modern hachetes should not be excluded (seen some nice ones at lowes today).
-
Marbles was a fine old maker in the Michigan north country.
Their knives, compasses, match safes, etc were legendary. That safety ax is worth a pretty penny in the condition it's in. 
(the new ones are crap BTW, imported from China) :P
though it does'nt say 'made in china' on it anywhere i suspect that it was. i bought it about 4 years ago NIB on an impulse. i'm guessing the name was lisenced or contracted for a production run.
what makes them crap? the steel in the bit too soft? i haven't used it enough to say for sure. if something needs chopping (like making kindling) i use my axe. you get more return for the effort.
here's a good question. does anyone use a hatchete anymore? would'nt a heavy long knife like a BK2 be more convenient and practical for average use?
The ones I was checking out at the Marbles retail outlet store last year had very poorly made blade gaurds. The metal was sloppily cut. Some didn't even fold away properly. ::) The store clerk was pretty embarrassed. He said the old ones were much better made. :-\
That being said, from the photos it doesn't look like yours is that bad.
Are you sure its a Chinese one? -
(the new ones are crap BTW, imported from China) :P
The ones I was checking out at the Marbles retail outlet store last year had very poorly made blade gaurds. The metal was sloppily cut. Some didn't even fold away properly. ::) The store clerk was pretty embarrassed. He said the old ones were much better made. :-
That being said, from the photos it doesn't look like yours is that bad.
Are you sure its a Chinese one?i think mine is chino, actually i am 99% certain that it is . does'nt matter to me one way or other. tell me why it is so wanting. after all it's just a hachete.
-
What I'm wondering is if maybe yours is from a different batch than the cruddy ones I played with?
Like you say though, it doesn't really matter as long as you're happy with the one you got. :) It does look nice 
-
Pocket axe eh? You americans sure have some big pockets. :D
-
@Mike, Lord of the Spammers! said:
That's a lovely looking hatchet alright
I'd soak it in linseed oil rather than water though mate, and probably put a new wedge in to

Wedging wouldn't have done any good on the No.5s I have...the eyes aren't even tapered. The head of the top one slid off before I even used it...they were only supposed to be "cosmetic" seconds when I bought them from SMKW. The other seemed to stay on, but to be on the safe side I drilled a hole through the head to put a steel pin through it.

-
@Spork, Lord of Lime Jello! said:
@Mike, Lord of the Spammers! said:
That's a lovely looking hatchet alright

I'd soak it in linseed oil rather than water though mate, and probably put a new wedge in to

Wedging wouldn't have done any good on the No.5s I have...the eyes aren't even tapered. The head of the top one slid off before I even used it...they were only supposed to be "cosmetic" seconds when I bought them from SMKW. The other seemed to stay on, but to be on the safe side I drilled a hole through the head to put a steel pin through it.
That must of taken a while :o
-
@Spork, Lord of Lime Jello! said:
@Mike, Lord of the Spammers! said:
Wedging wouldn't have done any good on the No.5s I have...the eyes aren't even tapered. The head of the top one slid off before I even used it...they were only supposed to be "cosmetic" seconds when I bought them from SMKW. The other seemed to stay on, but to be on the safe side I drilled a hole through the head to put a steel pin through it.thanks for the pics spork

your #5s have different handles than my #6. the 6 has fluting cut into the handle where it joins into the bit. also, the bit has reverse flutes cut into the axehole (i've always wanted to say that). the blade gaurd sits completely within the handle on mine and does not extend past the end of the handle. -
@Mike, Lord of the Spammers! said:
@Spork, Lord of Lime Jello! said:
@Mike, Lord of the Spammers! said:
That's a lovely looking hatchet alright

I'd soak it in linseed oil rather than water though mate, and probably put a new wedge in to

Wedging wouldn't have done any good on the No.5s I have...the eyes aren't even tapered. The head of the top one slid off before I even used it...they were only supposed to be "cosmetic" seconds when I bought them from SMKW. The other seemed to stay on, but to be on the safe side I drilled a hole through the head to put a steel pin through it.
That must of taken a while :o
It actually didn't :P
I believe that many axe heads are hardened only on the cutting bit portion, leaving the eye softer for toughness. I know it was an acceptable practice to bury the edge in soil to burn out a broken handle in the past.
-
Funny thing is you pay a lot to get a differential temper these days ::)
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login