Your thoughts on multitool X
-
I have an rs but wouldn't mind one of these.
-

I was gifted this bucktool several years ago.
I carried this for several years. it was my first multi tool. it had locking blades, and a unique opening for the pliers.what I didn't like was when opened up to use the pliers, the handles didn't match, they were always off center. this caused malfunctions when turning things clockwise to twisting back and forth.
the handles were nice and smooth, no rough edges. the locking mech. was located in good spot no problems.I did break one side of the lock.. this caused all the tools on that side to flop around, in and out. in my opinion it rendered the tool unsafe, so therefore unusable.
off to the fishing box it went..I think I would buy another one just because it's out of production now, it did serve me well for a long time.
-
The BuckTool seemed pretty slick when it was introduced, but compared to the tools that have came along since it is pretty crude. :P
-
LM super tool 300 + very strong
+ long knife blades
+ good screw drivers
+ big awl
+ very good plier heads
_ heavy
_ leather sheath cheap made -




Leatherman Juice SC2- Compact, perfect for pocket carry
- Great scissors, not as great as SAK scissors but still...
- Pliers are really solid for the size
- Pure aesthetics it's a good looking tool
- Corkscrew! Kind of makes up for the lack of an awl which I have found is very useful in other tools.
- Good performance over all screwdrivers are really nice and although the tools don't lock, they snap into place well
- Outside accessible knife blade and scissors both perform great
- Can opener sucks as a can opener but works really well as a cap lifter
- Uneven handle thickness makes it feel funny in the hand
- My biggest complaint, the scissors are in the same handle as the knife...it should not be sharing space, should be in it's own little handle. :)
- Phillips head could be a little sharper (for lack of a better word) It would fit just a little better into most screws if it wasn't so blunt and could be a tad longer (put the Pulse phillips driver in there or any Juice model and would be darn near perfect)
-
Leatherman Surge! + blade exchanger
+ outside one-handed opening blades
+ bit exchanger with tons 'o' bits available- he's a big boy - blade exchanger tab catches on everything - scissors are nice and big (cut through zip ties easy enough) but kinda weird, i broke the spring mechanism already by dropping it off a table, the stupid plastic thumb grip thing, and sometimes you can close them too far and wedge it closed...! *whew!* -
I just want to point out to everyone who posted the Vic Spirit... The Spirit X gets rid of the butter knife and puts a real knife in its place, thus bringing the cons list down to, basically, no OHO. That's pretty impressive Spirit... pretty impressive indeed...
-
Why did this thread die?
Leatherman Skeletool/Skeletool CX
Very lightweight and stylish, the carabiner makes it much easier to carry than tools requiring a pocket or sheat. Knife, pliers and bit drivers gives it a lot more functionality than you'd think, especially with the bit extender. Leatherman should have made more accessories that fit the bit driver, like maybe a saw or t-shank adapter. Wish it came with a combo phillips/flat head driver bit instead of one of each, since I don't like having something in the bit driver but have room for a single double edged bit in the handle. Not the most ergonomic of tools, but the design makes it perfect for making DIY accessories since the carabiner part folds over the bit driver and can be used to help secure accessories.Leatherman Crater C33L
Nice knife and the blade launcher is very useful, but you can hurt your finger with it when it slides on the handles. Would have liked a Crater/Expanse version that had the bit driver INSTEAD of the carabiner, or a saw (including both wouldn't make it much thicker). I like this kind of knife much better than a SAK so I wish LM had taken advantage of the deisgn possibilities better -
I didn't pay much attention to it for a while. After all, it's just a sticky ;)

I'll try to contribute some:
Leatherman Charge TTI
+Convenient: two OHO blades plus DIAMOND file and saw on the outside
+Versatile: with the accompanying bit kit, can cover all of your usual daily driver needs
+Premium steel main blade (S30V)
+Nice quality leather sheath, holds tool, bit kit, and can hold a small maglite, diamond stone, etc.-The saw rubs against the hidden lanyard ring, and is kind of displaced when you fold it in. This may lead to problems in the future.
-Fits a bit too snugly in the pouch when the bit kit is in there too, but I imagine this will loosen up a bit over time.
-If you have a fairly large belt, it can be difficult to slide the pouch on horizontally. I'm hoping this loosens up over time too though.
-Small bit driver may not have been the best choice. I would have much preferred an awl in its place. -
I'd contriboot but I'd end up writing another essay :-\ I have a problem.
-
@markn951 said:
I'd contriboot but I'd end up writing another essay :-\ I have a problem.I know that feeling... I review audio gear for a website and at one point one of my reviews ended up being 12000 words. To put it in perspective, my 50 page bachelor's thesis in economics this spring was 11500. I plan on writing some more extensive reviews on multitools too but I fear I'll start doing the same there
-
I'd contriboot but I'd end up writing another essay :-\ I have a problem.
I know that feeling... I review audio gear for a website and at one point one of my reviews ended up being 12000 words. To put it in perspective, my 50 page bachelor's thesis in economics this spring was 11500. I plan on writing some more extensive reviews on multitools too but I fear I'll start doing the same there
sucks doesn't it? I say I don't really like writing but when I start I just go

-
Buck X-Tract Fin
Pros:
- All tools one hand opening
- Big knife blade
- Excellent scissors (I'm risking of being blasphemous but they are if not better than SwissChamps then even with them... >:D )
- Nice non slipping handles
Cons:
- Pliers medium duty at the best
- 420HC steel
- Made in China
-
SOG Micro Tool Clip (Original version)
Pros
+Separate plain and serrated blades
+Compact size
+Strong pliers
+Side clipCons
-Pliers Not Very Useful
-Limited screwdriver selection
-Pliers handle / prybar does not open far enough to be useful
-Pliers handle retainer clip breaks easilyLeatherman Juice S2
Pros
+Lots of tools in a small package
+Sits well in a pocket
+Good scissors
+Comfortable in my hand
+Some tools available without openingCons
-Must open to access screwdrivers
-Flat screwdrivers will bite you while you open them
-Color wears off of the aluminum scales quicklyLeatherman Juice CS4
Same comments as for the S2 with these additions
Pros
+Fast cutting saw
+CorkscrewCons
-Heavy for a pocket tool
-Awl is dullLeatherman Squirt PS4
Pros
+Lots of tools packed onto a keychain sized tool
+Very good scissors for their size
+Spring loaded pliers
+Very lightCons
-Tools are light duty only
-Chisel ground blade
-Bottle opener hook is too close to the body of the tool -
SOG Powerlock w/ V-Cutter:
Pros
Great selection of tools
Compound leverage pliers (VERY STRONG)
1/4in. socket driver (sweeeeeet)Cons
Annoying interior tool handle covers
The bottle opener can obstruct the locking mechanism from engaging
The plain edge part of the knife blade is chisel ground (which I personally hate)
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
