Charles Elsener Swisstool
-
I have just recieved a used Charles Elsener signature Swisstool

As a big Swisstool fan I'm sure you can realise that this one means alot to me .Its in very good condition with some light scratches on the plain blade and a little of the red paint missing . In a way this is a good thing as it can enter into my EDC rotation without the fear of messing it up. The blades and tools have either had none or very little use :D
Another thing I love about this tool is its got some differences to any other Swisstools I've handled .Firstly and sorry for the poor pic but with the pliers folded away and looking at the end all the Swisstools I've seen have a little "post" on the side of the washer for the pliers ( right on the pic ) while the signature model ( on left ) does not .

Next there is no hard wire notch in the pliers

And lastley there is a number etched onto the tang on the plain blade

Judging by the round lanyard hole and plier head I would say this was a very early Swisstool



Another thing I'm really pleased with is the sheath :D It the first one of this kind I have had , they are not available in the UK . We have two options here ... a leather or a nylon one ( both velcrow ) . So this is a nice change .


The signature isnt so much engraved more etched like the number on the tang
I would like to say a huge thanks to Def and Felinevet because without those two I would never been able to own it . I hold the both of you in the highest regard .
Dunc
-
I'm truly green with envy mate :)
As much as I hate draw queens, that deservs to live a sheltered life, infact you should create a shrine for it :D
I know it's already used, but it would be a crying shame to lose or damage it :)
-
Dont worry its not going near the beach or anything . To be honest I dont need to use it as I have other swisstools .It does need to be out on display though . A shrine
Youve given me an idea there ;)Dunc
-
@dunc5 said:
Dont worry its not going near the beach or anything . To be honest I dont need to use it as I have other swisstools .It does need to be out on display though . A shrine
Youve given me an idea there ;)Dunc
Well you've already got the candle lamps, so thats a start :D
Any chance of a picture of one of those lamps, they look kinda cool in an olde worlde sorta way :)
-
@micky d said:
Dont worry its not going near the beach or anything . To be honest I dont need to use it as I have other swisstools .It does need to be out on display though . A shrine
Youve given me an idea there ;)Dunc
Well you've already got the candle lamps, so thats a start :D
Any chance of a picture of one of those lamps, they look kinda cool in an olde worlde sorta way :)
My wife collects Henry Watson pottery . http://search.ebay.co.uk/search/search.dll?from=R40&_trksid=m37&satitle=henry+watson+pottery

Dunc
-
It's a good thing wifes like brakeable stuff, it means they can only hit you with it once :D
-
That is a beauty Dunc, and I am glad that you got it. I know you've wanted one for a long time, and as much as I wanted it too ( >:D ) I knew I'd never be able to enjoy it properly knowing you didn't have one!
That's the same sheath that I have with all of my SwissTools and I've always found it to be quite sturdy. It's been on duty belts and regular belts through all kinds of activities and weather and I've never lost a SwissTool. If it wouldn't be too much to ask, could you post some pictures of the sheaths you have other than this one?
Take good care of that one- whatever you decide to do with it!
Def
-
Congrats on finally getting the autographed SwissTool Dunc! I know you've been wanting one for a long time :)
Funny story here; several years ago, on an entirely different forum, some chap from the UK posted a heads-up about an eBay auction for a rare Charles Elsener autographed SwissTool. The tool looked intriguing, so I bid on the auction and won it. (I was the only bidder) The tool arrived a short time later, and I thanked the gentleman on the forum for pointing out the auction.
I still have that SwissTool to this day.....and the guy who gave the heads-up was a fellow named Dunc5
Thanks again Dunc!

-
That is quite the coincidence :)
-
@micky d said:
That is quite the coincidence :)I had forgotten all about it until Bob reminded the other day :D Really made me smile
Dunc
-
@Defender said:
That is a beauty Dunc, and I am glad that you got it. I know you've wanted one for a long time, and as much as I wanted it too ( >:D ) I knew I'd never be able to enjoy it properly knowing you didn't have one!That's the same sheath that I have with all of my SwissTools and I've always found it to be quite sturdy. It's been on duty belts and regular belts through all kinds of activities and weather and I've never lost a SwissTool. If it wouldn't be too much to ask, could you post some pictures of the sheaths you have other than this one?
Take good care of that one- whatever you decide to do with it!
Def
Heres a couple of pics of the sheaths that the UK dealers stock
The RS model comes with the nylon one as std


Def while the Swisstool will be kept well out of harms way under armed guard I wouldnt mind using the sheath for my EDC RS . Are the sheaths cheap and easily available ? Of course if this isnt a std U.S sheath then I will have to have it as a non user .
Dunc
-
I've got leather sheaths with my ST's but those cordura one's do look the dog's goolies don't they :)
-
I wouldn't mind trying one of those other sheaths- like I said, all the sheaths I have are the same. If you are interested in a sheath swap, let me know!
Def
-
Dunc,
I've got the same sheath as you. My blade number is 0253 (I'm embarrassed to say that I'd never noticed the blade number before) :-[Wonder what it means?

-
Bob please dont think I'm being rude by not replying very quickly as I'm hanging wallpaper with my wife , shes pasting and im hanging but while she is pasting im checking on here :D I'm trying to confirm if that sheath is a std US one as I want to use it with my RS model but only if its easy to replace .
Dunc
-
Does anybody know if the Surge fits in the fancy Vic leather sheath?
-
-
....I'm trying to confirm if that sheath is a std US one as I want to use it with my RS model but only if its easy to replace .
Dunc
It must be the North American standard; I've got four corduras with snap closures, but none with velcro
Super job :D While the Signed Swisstool will be kept safe the sheath may well go into EDC :D
Dunc
-
....I'm trying to confirm if that sheath is a std US one as I want to use it with my RS model but only if its easy to replace .
Dunc
It must be the North American standard; I've got four corduras with snap closures, but none with velcro
Super job :D While the Signed Swisstool will be kept safe the sheath may well go into EDC :D
Dunc
I think that's a wise decision. ;)
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login