What Did You Use Your Multitool For Today?
-
I guess this is the current model equivalent of what we use:
http://www.husqvarna.com/us/landowner/products/forestry-clearing-saws/husqvarna-forestry-clearing-saws-for-landowners/Requires a harness to use, and you wouldn't want to use those without ear protectors. Put a blade on that thing and for any tree up to 5 cm in diameters it'll make a chainsaw look like you're cutting down trees in slow motion <3
-
GREAT pics of a hard working tool!
-
Forgot to post this one . Last Sunday we had a coastguard callout to a broken down Jet skier who had fired off an orange smoke . With the Jet skier safely ashore and details taken we were about to head back to the station when a member of the public came over and told us the alarm was sounding in the disabled toilet . Worried that someone was inside and in need of help we went over and called through the door but there was no reply . You need a special key called a RADAR key for access which is only issued to registered Disabled people .The large flat driver on my PST was able to overide the lock and give us access . Luckily it was a false alarm but it was good I had a multitool on me otherwise it would have taken sometime to get the door open .
Dunc
-
I used the back end of my Metwrench to spoon my noodles messily into my mouth at lunchtime as I forgot to take a fork to work today.
-
Basically used it for the same as yesterday, but I also used my DIY t-shank adapter for the Skeletool's bit holder with a jigsaw blade in it to cut down trees that I couldn't cut with the trimmer head on the forestry clearing saw.

-
Used my Octane assembling a Swing for the backyard. Phillips and Clampack opener both get an A+

-
Over the last few weeks I beleive I have used every tool on all my MTs.
Used the saw on the ChALX to cut furring down to the right size. I didnt want to walk although to the power saw, and the ChALX saw was surprisingly efficient.
10/10used the metal file to grind down a brass washer that was just a little too large, again surprisingly effective. (I don't have a grinder setup atm)
10/10Used the hook to cut some twine.
12/10Used the pliers to ply. I love the quality and grip the LM pliers have on nearly all materials.
Used 4 different bits on the bit driver within 3 minutes. (which is why I have 3 bit drivers on my EDC)
10/10Used the Biner clip on the K503 to clip to my harness while working up on a lift. Then later used same clip to pop some beers.
10/10Used the K503 to open a box. (box contained more tools)
total time saved as a result of my MTs:
about 7.5 hours. -
well been camping for the last 4 days so the wave has been used for cutting packaging, scissors to open children's ice pops,pliers to bend tent pegs,

paul
-
Had my last normal day at work today (working tomorrow and sunday too). Been working at a museum for the last 7 years, part time/summer job. Not until this year I managed to get my bosses to buy Leathermans for the summer employees. Last year a guy who didn't have his own actually went as far as to use a shovel to try to whack the grass trimmer line enough to cut it. Ironically the boss bought the cheapest LMs he found, which were the Leatherman Flair...which are specialized for wine tasting or whatever (has a cork screw, big bottle opener and a fork)
Anyways, part of the museum is a 240 meter long tunnel that is shaped like a U and goes into the mountain side. If you didn't know it was a museum you'd think it was a mine (which is fitting, since it's a rock blasting museum). Was workig in the tunnel today changing lightbulbs and that's a Leatherman job between having to unscrew lids to get to lightbulbs on weird-ass lamps, prying off lamp covers etc. Used an electric lift to do the work since the tunnel ceiling is high-ish. love the lift, you can actually drive it and do so from the basket using a joystick. Completely self-powered and silent due to the electric motor, and heavy enough not to need any safety clamps deployed. Don't know if it's a new kind of lift or whatever but I haven't seen many of them, mostly I see those annoying trailer lifts that take forever to deploy.
Unfortunately a bit blurry pictures, the downside of having the controls in the basket is that any bump in the road is amplified a lot.


Also emptied garbage cans around the museum park, and the pliers can replace a triangle key when necessary.

-
Thanks Mat I might do that next time ;)
Cptnodegard, the museum looks like a very interesting place to work!

-
Used my Blue Farmer to adjust the chainsaw, open the chain lube cap and open the green beans for the dogs. I've been using my Farmer more than my Leatherman lately!
-
I was having dinner with the wife at Marlton Diner. And I had to use the pliers on my LM Skeletool CX to open a stuck cap on a bottle of tabasco!!
-
@BIG-TARGET said:
I was having dinner with the wife at Marlton Diner. And I had to use the pliers on my LM Skeletool CX to open a stuck cap on a bottle of tabasco!!here's something I read in the newspaper to make you think: 'they've been married so long they're on their second bottle of tabasco sauce'.
-
Opened clam shell pack of my son's toy with the charge, Ben Ten rocks!
-
I was having dinner with the wife at Marlton Diner. And I had to use the pliers on my LM Skeletool CX to open a stuck cap on a bottle of tabasco!!
here's something I read in the newspaper to make you think: 'they've been married so long they're on their second bottle of tabasco sauce'.
Only on their second bottle of tabasco?

-
probably only makes sense outside of the U.S., in Germany (where I work as a waiter whilst studying), they complain about how the thai curry they ordered was very spicy, I'm reduced to saying 'yes, I know, its a curry [idiots]' :-\
-
@Jmora said:
probably only makes sense outside of the U.S., in Germany (where I work as a waiter whilst studying), they complain about how the thai curry they ordered was very spicy, I'm reduced to saying 'yes, I know, its a curry [idiots]' :-\Sorry Jmora, not to be disrespectful but its not the customers fault, there are many thai curry brands that are exported all over the world, ranging from very mild to very hot. :(
-
probably only makes sense outside of the U.S., in Germany (where I work as a waiter whilst studying), they complain about how the thai curry they ordered was very spicy, I'm reduced to saying 'yes, I know, its a curry [idiots]' :-\
Sorry Jmora, not to be disrespectful but its not the customers fault, there are many thai curry brands that are exported all over the world, ranging from very mild to very hot. :(
No problem, I'm really making fun of my customers who can't handle a bit of chilli, the more spicy food you can handle, the more you will appreciate the food made around the equator generally. Anyway, not to hijack this thread, I used my vintage ribbed alox cadet to cut up an apple, which had a growth around its core reminding me of a human rectal sphincter, I just couldn't eat that thing the way it was.
-
curry ;)
second bottle of tabasco :)
human rectal sphincter :D

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login