M.T.O watch project,
-
Paypal sent!
Looking forward to seeing how this progresses. So cool to try out a nice project like this...
-
How come it's called bond Nato? 007 Bond?
ALso, is that what the face will look like (1st post)? Or are you doing aged ones too?
;)

A true Bond NATO has green and maroon stripes (as in the picture above).
cheers gunga, yes this is very true and the black and grey has become the known colour , sadly the proper coloured ones cost a lot more money but i can get them, ive got one coming so ill see wht there like for possibly the next project,
ok ive just got back from my trip and had a message from Def, his guy cant do the case backs so ill see if i can find someone but will everyone be ok if there completely sterile , or i could stamp them and that would give it a military look,
paul
-
Hi Paul hope you had a good time on your trip
just a bit off topic but do the straps you get contain a keeper strap for security? 
-
I'm fine with sterile....money coming to you tomorrow mate.
-
I prefer stamped if possible. Makes it seem more special...
-
If you can get something done without breaking the bank then I think a number would be better. If not then I'd still want it even if it was 'sterile'.
I'm fine with sterile....money coming to you tomorrow mate.
i think a stamped set up like ZEDMTO#01 would look good, as looks like a serial number, 
if you can get it then that sounds good to me.

-
Stamped works as well.
-
Caseback doesn't really matter to me. I don't really want "NutSAK" on the back of mine. ;) :D
Just MTOXX would be cool...
-
I would suggest MT.O2010#01 ;)
-
-
-
I would suggest MT.O2010#01 ;)
yeah good idea john, i need to find a plate to stamp on thats round and fits inside the case backs, :-\
Dimensions?
minimum thickness I would suggest"so it doesn't buckle with impacts"20mm or greater 
[edit] I might be able to help ;)
The flat brushed part is 20 mm and the sloping polished part is 4.5 mm total diameter of the bulge is 29 mm and whole caseback is 35.4 mm not sure of the thickness though john and cheers for the help

-
I would suggest MT.O2010#01 ;)
yeah good idea john, i need to find a plate to stamp on thats round and fits inside the case backs, :-\
Dimensions?
minimum thickness I would suggest"so it doesn't buckle with impacts"20mm or greater 
[edit] I might be able to help ;)
The flat brushed part is 20 mm and the sloping polished part is 4.5 mm total diameter of the bulge is 29 mm and whole caseback is 35.4 mm not sure of the thickness though john and cheers for the help

Paul I was thinking of the anvil mate so as long as the anvil is 20mm thick placed onto a vise of some sort the thickness should be fine,more importantly is where are you going to strike the digits? straight across or in a arc?
-
[quote author=John link=topic=21505.msg401712#msg401712 date=1280505308]
I would suggest MT.O2010#01 ;)yeah good idea john, i need to find a plate to stamp on thats round and fits inside the case backs, :-\
Dimensions?
minimum thickness I would suggest"so it doesn't buckle with impacts"20mm or greater 
[edit] I might be able to help ;)
The flat brushed part is 20 mm and the sloping polished part is 4.5 mm total diameter of the bulge is 29 mm and whole caseback is 35.4 mm not sure of the thickness though john and cheers for the help

Paul I was thinking of the anvil mate so as long as the anvil is 20mm thick placed onto a vise of some sort the thickness should be fine,more importantly is where are you going to strike the digits? straight across or in a arc?
[/quote]ive got a few old case backs to test on john , though at the moment the letters etc are working out costly,
-
[quote author=Zed link=topic=21505.msg401730#msg401730 date=1280508469]
[quote author=John link=topic=21505.msg401712#msg401712 date=1280505308]
I would suggest MT.O2010#01 ;)yeah good idea john, i need to find a plate to stamp on thats round and fits inside the case backs, :-\
Dimensions?
minimum thickness I would suggest"so it doesn't buckle with impacts"20mm or greater 
[edit] I might be able to help ;)
The flat brushed part is 20 mm and the sloping polished part is 4.5 mm total diameter of the bulge is 29 mm and whole caseback is 35.4 mm not sure of the thickness though john and cheers for the help

Paul I was thinking of the anvil mate so as long as the anvil is 20mm thick placed onto a vise of some sort the thickness should be fine,more importantly is where are you going to strike the digits? straight across or in a arc?
[/quote]ive got a few old case backs to test on john , though at the moment the letters etc are working out costly,
[/quote]Why? :D
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
