What Did You Use Your Multitool For Today?
-
I used the reamer on my farmer to scratch my name into the finish of a car on saturday :ahhh
Don't worry, all legal. It was the car of a geocacher and he turned it into a geocache. To log it you had to scratch the name into the finish (throuhg the finish). I hadn't thought that it was so hard to do, took me quite a while and it didn't look nice at all

-
I used the bit driver of my LEATHERMAN Surge to remove a broken water bottle bracket from my bike frame.
JIM -
SwissChamp
- magnifying lens - read some really really small letters on some contract (you know those things you should read but you never do whilst they are so tiny)
- Small blade - opened some mail boxes
- Pliers - picked up something that did not look healthy at all from floor and throw it in trash
But day is still young.... :D
-
@Turnstone said:
I used the reamer on my farmer to scratch my name into the finish of a car on saturday :ahhhDon't worry, all legal. It was the car of a geocacher and he turned it into a geocache. To log it you had to scratch the name into the finish (throuhg the finish). I hadn't thought that it was so hard to do, took me quite a while and it didn't look nice at all

Did you get a pic?
Sounds like an interesting cache :D
-
I used the reamer on my farmer to scratch my name into the finish of a car on saturday :ahhh
Don't worry, all legal. It was the car of a geocacher and he turned it into a geocache. To log it you had to scratch the name into the finish (throuhg the finish). I hadn't thought that it was so hard to do, took me quite a while and it didn't look nice at all

Did you get a pic?
Sounds like an interesting cache :D
Yes, here it is. Doesn't look very good, but you can read it


-
I used the reamer on my farmer to scratch my name into the finish of a car on saturday :ahhh
Don't worry, all legal. It was the car of a geocacher and he turned it into a geocache. To log it you had to scratch the name into the finish (throuhg the finish). I hadn't thought that it was so hard to do, took me quite a while and it didn't look nice at all

Did you get a pic?
Sounds like an interesting cache :D
Yes, here it is. Doesn't look very good, but you can read it

Do you have the name of the cache I'd like to read the other comments
-
I used the reamer on my farmer to scratch my name into the finish of a car on saturday :ahhh
Don't worry, all legal. It was the car of a geocacher and he turned it into a geocache. To log it you had to scratch the name into the finish (throuhg the finish). I hadn't thought that it was so hard to do, took me quite a while and it didn't look nice at all

Did you get a pic?
Sounds like an interesting cache :D
Yes, here it is. Doesn't look very good, but you can read it

Do you have the name of the cache I'd like to read the other comments
It's GC1EDEX. But all comments are written in german.
-
SwissChamp
- knife to cut bulk of scrap cables on pallet
Been tempted to use file/saw to saw trough one cable... But had big electrician wire cutters... Next time maybe... :D
-
since camping last week we have lost our tin opener so today my wave was used to open a tin of tuna for lunch time sandwiches :D
-
Pioneer can opener to open a small can for spices. I had to refill it and I needed to remove the plastic caps with the holes inside.
After that I needed the can opener again to pull out a small drawer on which the handles were broken off. Unfortunately its plastic so I couldn't use the screwdriver to attach a new handle

-
Used my Wenger Ranger172( http://www.wengerna.com/ranger-172-16309 ) to cut a delicious piece of gilled Ahi tuna-seasoned with garlic and dill(serve over sesame noodles), that I had for lunch at F&M deli( http://www.fandmcaterers.com/ )

-
@BIG-TARGET said:
Used my Wenger Ranger172( http://www.wengerna.com/ranger-172-16309 ) to cut a delicious piece of gilled Ahi tuna-seasoned with garlic and dill(serve over sesame noodles), that I had for lunch at F&M deli( http://www.fandmcaterers.com/ )
THAT is a wicked cool knife

Lunch sounds pretty good too
-
Bike maintenance day today.
Firstly I used my Uber Kick to cut out a section of hose pipe that the rabbit had eaten so I could fix it back up hose down the bike.
I then used the same Kick to totally strip down the dérailleur, brakes, all sorts of tweaking and adjusting, and put it all back together again after cleaning and re-lubing. The bit driver is a truly wonderful thing and makes this Kick a really practical bike tool!
Changed the rear tyre too, but didn't use a multi for that :D
-
Was on on a bike trip today to enjoy the weather, and did some maintenance on one of my geocaches, replacing the makeshift thumbtack installation with a screw. The Skeletool CX had the honors of being the screwdriver for the torx screw

-
SwissChamp (is there any other?!? :D :D)
- Lost my ball point pen so i used one from SC to sign some receipt's on fuel station...
:sak: -
Yesterday I took my new Vic Trailmaster to a nearby Geocache. Didn't expect to use it, took it with me just because it was new ;) Well, the cache was hidden in a birdhouse (without a hole for birds to come in), and the wood was soaked from the rain from the past days. I couldn't open it with my hands. So I used the locking bottle opener / screwdriver to open it
Worked fine without causing any damage. -
Used trusty skeletool to fix the diverter valve handle on the shower.
Nice.
-
My DIY mini pry bar to break into chest at work... (Yesterday)
-
Today...
Used SwissChamp and Buck X-tract to fix my window shades (believe that is correct term ::) )
- Unscrew plain screws with Buck
- Cut old tape with Buck
- Put new tape (hm, also hope it is correct term for synthetic plastic very flat rope ::) ) using Buck pliers to pull it trough some very narrow holes
- Take the rest of old broken tape and unscrew a bolt with SC
- Put new tape and cut small holes with knife (easier than to use reamer)
- Screw back bolt now with Buck
- Put all in place and screw back plain screws now with SC
- Used lighter to "seal" ends of tape...
Some thought's:
I have planned to sell my Buck, but now i have second thoughts. Will keep it because of one hand opening!! Pliers were up to the job (it was lightweight), knifes small on SC and regular on Buck excellent, plain screwdrivers were both (SC and Buck) excellent and up to the job only drawback for SC is it polished finish so it has a tendency to slip out of screw. All together it was 30min job and both MT's were up to the job....Some pics...


-
...and some more...



Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login