I Voided My Leatherman's Warranty
-
How many of you can say the same?
And guess what?

You're AWL jealous!!!!



My Wave just got a little eviler! Replaced the flathead driver with one of them stingers from a ST300, thanks to another member you all have guessed by now. Fairly easy swap on my end, it is just a little thicker than the tool it replaced. I tried to then swap the slotted driver with the canopener, but that was way to thick. oh well, at least i got an AWL. Lock up is solid, although the notch is just a tad thinner than than the others, so it clicks a little extra while unlocking. If I felt the urge I could file it a bit, but I don't because it fits the locking mechanism tighter.
Already came in handy today. I now have a voided warranty on a charge and a wave :o :o :o
Phase one of the Super Wave, complete.
-
Looks great mate.

-
Very nice Charger - well done mate

-
I might try to make an awl by grinding a driver I think :)
Not sure how it might work out, but it sounds like fun :D
-
I just wished I could find a use for an awl. :-\ I never use 'em.
-
Me neither Sean - I just want to shred some metal :D
-
That looks awlfully useful :D

-
-
Got to have an awl. Great for pre-drilling holes, boring new holes in belt, scribing, and many other uses

-
Great mod there Charger

-
@Charger said:
How many of you can say the same?My Wave just got a little eviler! Replaced the flathead driver with one of them stingers from a ST300, thanks to another member you all have guessed by now. Fairly easy swap on my end, it is just a little thicker than the tool it replaced. I tried to then swap the slotted driver with the canopener, but that was way to thick. oh well, at least i got an AWL. Lock up is solid, although the notch is just a tad thinner than than the others, so it clicks a little extra while unlocking. If I felt the urge I could file it a bit, but I don't because it fits the locking mechanism tighter.
Already came in handy today. I now have a voided warranty on a charge and a wave :o :o :o
Phase one of the Super Wave, complete.
Every Leatherman I have is modded, so no more warranty for me lol. Glad you got it installed and put to use. I took the can openers out of both my Wave and Surge but have two versions under way, one goes into the bit driver, the other into the clip/lanyard slot to see which is more practical for me. While I use a can opener 1% of the time, I still want to have one as an add-on I can slip into my sheath. As for the tight fit... I like all of my tools to lock up tight with no play. I fabricate my notches to a .001" tolerance whereas I am guessing Leatherman goes with something more along the lines of .005" (if not more) of a tolerance. I have found differences in measurements, even amongst the same type of tool with a different date code. For the most part, the implements are pretty consistent, but I have found differences in plier head thickness and frame widths and they sometimes need slight adjustments when modding them. Glad you like the awl, put it to some evil use ;)
-
@evil510 said:
*Every Leatherman I have is modded, so no more warranty for me lol. Glad you got it installed and put to use. I took the can openers out of both my Wave and Surge but have two versions under way, one goes into the bit driver, the other into the clip/lanyard slot to see which is more practical for me. While I use a can opener 1% of the time, I still want to have one as an add-on I can slip into my sheath. *As for the tight fit... I like all of my tools to lock up tight with no play. I fabricate my notches to a .001" tolerance whereas I am guessing Leatherman goes with something more along the lines of .005" ** (if not more) of a tolerance. I have found differences in measurements, even amongst the same type of tool with a different date code. For the most part, the implements are pretty consistent, but I have found differences in plier head thickness and frame widths and they sometimes need slight adjustments when modding them. Glad you like the awl, put it to some evil use ;)
Very interesting, and It really does lock up more securely. What do you put instead of a canopener?And dont worry, the awl has already been at its evil ways. If you never use an awl, you'll never need it. Once you start to use it for some things, you use it for everything. IMO
-
I've ground down the large flathead driver on both my Wave and Charge into awls. Works great! I can't live without an awl on my multi-tool!
-
Lovely job, and definitely a useful tool addition in my opinion

-
Extremely awlsome!
Did you have to sacrifice the ST300 for parts or are you able to get the awl as a stand alone item?
-
*Every Leatherman I have is modded, so no more warranty for me lol. Glad you got it installed and put to use. I took the can openers out of both my Wave and Surge but have two versions under way, one goes into the bit driver, the other into the clip/lanyard slot to see which is more practical for me. While I use a can opener 1% of the time, I still want to have one as an add-on I can slip into my sheath. *As for the tight fit... I like all of my tools to lock up tight with no play. I fabricate my notches to a .001" tolerance whereas I am guessing Leatherman goes with something more along the lines of .005" ** (if not more) of a tolerance. I have found differences in measurements, even amongst the same type of tool with a different date code. For the most part, the implements are pretty consistent, but I have found differences in plier head thickness and frame widths and they sometimes need slight adjustments when modding them. Glad you like the awl, put it to some evil use ;)
Very interesting, and It really does lock up more securely. What do you put instead of a canopener?And dont worry, the awl has already been at its evil ways. If you never use an awl, you'll never need it. Once you start to use it for some things, you use it for everything. IMO
interesting
, I'm one of those who has yet to find much use for an awl, though I hear everyone else here raving about them. From now I'm going to EDC the SAK farmer or soldier, and concentrate on really using it
. Maybe one of those superfluous drivers on my sideclip could also be ground down. -
Was it a straight pull from the Super Tool 300 and slid it into the Wave? Strange, didn't look like it would fit.
If I had a grinder I'd of fixed that flat blade a long time ago and made it into an awl. Myself, wanted one with the hole, but that stainless steel is tough. (Could always snap the blade if needing warranty work and modify it again.)
Wished was a part house or some place to buy tools to replace them in ours, since Leatherman is not listening. Maybe if certain individuals would find a way to produce more of them replacement tools we could purchase kits or parts from them. 
Been tempted to buy a Surge just for the awl, well and for the semi-t-shank ability too. Cheapest I can find is $74. Keep hoping the MUT will drive Surge prices down more.
Why a Wave has a flathead tool when there's a large bit driver... perfect place for an awl.
-
The perfect place on the Wave for an awl is that tiny bit-holder :)
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login