Show your slip joint's thread!
-
Yeah it is a shame it has developed wobble. You might ask someone who is in the know but
it might be fixable? -

What does it taste like
:D -
case 6318SS dated 2003. once it's sharp (which can be trying) holds an edge well. fairly weak springs and the sheepfoot blade has hardly any snap. F&F walks all over the the boker and kissing crane that i have. blades are rock solid but dirty



-
Just got this one:

Its the perfect slippie for me. The backspring is just tight enough, I can open it by pinching it (very short brittle nails), and its the perfect size. Only problem is...I'm afraid to carry it.
-
do as you will but that alsdorf is sweet... are the scales linen micarta? closed length?
that's the kinda slipjoint that has few peers. well done.

we need more pics.
-
yeah that alsdorf is a very nice looking knife, never heard of them before.

-
Sorry Sappy, ;) You should have been around here when you could not only change your avatar, but
also your name, now that caused alot of confusion. :D -
Haven't posted any new eye-candy to this thread in a while, finally got some new stuff to change that. I've had this one for a little while, got it back when I got that Remington Repro BSA Scout, and just now got around to snapping some pics.



It's a Bear & Son Heritage Series Jumbo Trapper in Green Jigged Bone. Been wanting one of these since seeing a few a friend of mine has gotten over the last year but I wasn't going to pay the average price they have been wanting for these.....I just as soon get another GEC Pioneer. But when this one came up for sale at $39.95 I jumped at it.
It's 4 1/2" closed with brass liners and pins and lanyard tube, nickle/silver bolsters, and 440A stainless blades. At first glance it's a typical jumbo trapper with some real good looking bone. Overall the F&F is pretty good with even edge bevels, nice mirror polish, decent backspring strength, usuably sharp edges, zero blade play throughout, and a almost gap free fit in build.
On closer inspection it does have a few faults. First is a backspring gap between the backside liner and the secondary blade's backspring, running from the bolster down about a little over a inch. Not quite a hairline but not huge either, I can just barely see light through it.

Second is the finish on the backside head of the center pin. Here it appears the knife wasn't positioned correctly when the machine that finishes off the heads of the pins did its job.....

......it was off-center and cut into both the pin and the bone. Their QC was definitely on break the day this one was made. It doesn't affect anything except make for an unsightly looking pin. But this is something that should not have made it out the door.
But outside of that it's not a bad Trapper, tighten up the QC a bit and this thing would be sweet. For $40 it would make an excellent user. If I paid anymore than that it would have been sent back. For an American made slippie which usually costs in the $60-$70 range they need to do better, and I have seen flawless examples from them. With what they are doing if they tightened up their QC they could be a force in the slipjoint market, but it seems they have a tendancy to fall back into their earlier Bear MGC days.
2xTap
-
Nice 2xtap, love the scales! Thanks for doing these short reviews + pics. Gives those of us
who are interested in value some choice. :) -
Sean,
You're welcome bud. I'll be putting up more throughout the day as I have several more knives I just recently received......a Colonel Coon, some Northwoods, a couple of Rough Riders, and a Schrade.
The Colonel Coon is next!
2xTap
-
I've been wanting some of these since SMKW's revived the brand. But like many other things, once I have the money to do it I wind up getting something else. Anyway, when this popped up on Knives Live at $49.99 on sale, well.....out came the credit card!
It's from the Colonel Coon Autumn Gold Smooth Bone series. These are built by Queen Cutlery and this particular one is based on their large #49 Cattle King Stockman at 4 1/4" closed.



Build is typical with brass liners and pins, nickle/silver bolsters and CC shield, and 420HC blades. The F&F is almost flawless. Aside from a hairline gap running between the backside liner and secondary backspring.......

..........I can't see any light through it but the fine line is there and is about 3 inches long. (NOTE: My buddy Marv picked up this same knife as well about 3 weeks ago and his has the exact same hairline gap as mine, in the same place and almost the same length....odd!)But aside from that faint gap the F&F is perfect. Flawless blade grinds with sharp even edges, near flawless mirror polish throughout, flush fit springs with blades opened or closed, stout backspring tension, zero blade play anywhere, and all built on a great pattern.
And that Autumn Gold Smooth Bone is sweet, polished nice and smooth with a seamless transition between scales and bolsters and not one pin to be felt. Dragging your fingers across the sides of this knife the only thing you feel is the shield. For $50 bucks it's a nice Queen built Stockie!

2xTap
-
Picked up a few new Northwoods slippies from Derrick over at KnivesShipFree.com this week, One a pattern I don't own any of and another that has become a favorite of mine.
I'll start off first with with the one I've not owned any of before.....the English Jack. Liked the pattern as it came from Queen Cutlery in some of their runs. Just never bought one. Seen these Northwoods versions just recently with the long Sheeps mainblade and had to have one.



This one is 4 1/2" closed and done in a nice deep Green Jigged Bone. The blades are mirror polished 420HC stainless and the knife sports nickle/silver bolsters and shield, and brass liners and pins. Overall F&F is real good but does have a few spots along the backspring area were there are faint gaps between liners and springs........

......outside of those few little minor spots the F&F is flawless. The mirror polish on the blades and bolsters/shield is about perfect, the blade grinds are clean and edges sharp and even, backsprings are GEC stout and sit flush with blades opened or closed, zero blade play on either blade, and the bone has a real nice dark, almost Forest Green, color to them that real gives off a different shade depending on the light you are under.
All and all it's a really well built piece, and it has some good heft to it. Feels real good in the hand as well. My only real complaint about this one is that it has half-stops. I've never cared for half-stops on my knives but it is something I can easily live with.
Derrick also has these in a sweet Red Smooth Bone which is next on my list!

2xTap
-
Now this next one is in a pattern I really like and have grown fond of. The Gunstock as done by Queen Cutlery has grown on me quite a bit and I own several of them. They are one of the few smaller slipjoint patterns I really like, not only for the design and look but that also feel real good in the hand.
This Northwoods version is no different. It's 3 1/2" closed and done in Italian Jigged Bone. Liners and pins are brass with nickle/silver bolsters and shield, and blades made of D2 Tool Steel.



F&F is similar to the English Jack in that it's about perfect except for a few minor faint gaps along the backspring area.....

Otherwise the build is excellent with clean blade grinds and sharp edges, good stoutness to the backsprings and they sit flush with the blades opened or closed, flawless mirror polish throughtout, zero blade play on either blade, and a otherwise gap free fit.
The bone, while I am not sure what the color actually is, looks to me like a Chestnut Bone, or a Dark Amber. Real good looking stuff.
This one is going to be quite at home alongside the others of this design I have from Robeson, Schatt & Morgan, Queen, Bulldog USA, and Rigid USA.

2xTap
-
I do love your posts on this thread 2xTap, very much appreciate the time you take.

-
Thanks Gareth, I appreciate that. I'll have a few more going up today once I get pics of them done.....doing some of them right now.
2xTap
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login