What Did You Use Your Multitool For Today?
-
Yesterday I took my new Vic Trailmaster to a nearby Geocache. Didn't expect to use it, took it with me just because it was new ;) Well, the cache was hidden in a birdhouse (without a hole for birds to come in), and the wood was soaked from the rain from the past days. I couldn't open it with my hands. So I used the locking bottle opener / screwdriver to open it
Worked fine without causing any damage. -
Used trusty skeletool to fix the diverter valve handle on the shower.
Nice.
-
My DIY mini pry bar to break into chest at work... (Yesterday)
-
Today...
Used SwissChamp and Buck X-tract to fix my window shades (believe that is correct term ::) )
- Unscrew plain screws with Buck
- Cut old tape with Buck
- Put new tape (hm, also hope it is correct term for synthetic plastic very flat rope ::) ) using Buck pliers to pull it trough some very narrow holes
- Take the rest of old broken tape and unscrew a bolt with SC
- Put new tape and cut small holes with knife (easier than to use reamer)
- Screw back bolt now with Buck
- Put all in place and screw back plain screws now with SC
- Used lighter to "seal" ends of tape...
Some thought's:
I have planned to sell my Buck, but now i have second thoughts. Will keep it because of one hand opening!! Pliers were up to the job (it was lightweight), knifes small on SC and regular on Buck excellent, plain screwdrivers were both (SC and Buck) excellent and up to the job only drawback for SC is it polished finish so it has a tendency to slip out of screw. All together it was 30min job and both MT's were up to the job....Some pics...


-
...and some more...



-
...and...



-
I've never owned an X-tract but have had the opportunity to try a couple and was impressed. Certainly a tool that doesn't get as much mention as it should.
-
Indeed the Xtract Fin is high up on my list of tools that I want just to check them out... seems like a very nice tool
-
Pushed the Gerber Solstice in to gardening duties today... it's actually surpassing my Kf4 in terms of most used MT
-
Had a drinking water hose pipe at work with a split in it near the tap so used my trusty PST to undo the jubilee clip then cut the bad bit of hose off and reconnect it .


Dunc
-
Used the scissors on my Juice S2 to open red sauce satchets for the little ones in McD's

-
This may be the lamest thing imaginable that someone could subject their SAK to, but nonetheless the SAK did right by me.
The bottles of water I get are made of thin, almost flimsy plastic. When you squeeze hard enough to break the seal between the ring and bottle cap, you almost always dribble water on yourself. I've sound if you cut the plastic bits holding the ring and cap together, you don't have to put forth as much effort. So, today (and yesterday, actually), my little SwissMemory helped me stay dry when opening a bottle of water.
-
I picked up a live scorpion by the tail with my Paratool and flushed him. My wife didn't want scorpion innards on the bedroom floor.
-
Thank god you didn't have a Squirt P(S)4 with you at the time

-
I've had my Ti knocking about while I started surgery on my Lunada - so far the patient is doing OK >:D
-
Nuphoria
I'm not sure what one is but I think I want a picture of your Lunada :DIts not a big conifer is it?

-

Used the pen of the SwissCard Lite to write the address on an envelope
-
@sparky415 said:
Nuphoria
I'm not sure what one is but I think I want a picture of your Lunada :DIts not a big conifer is it?

I bet she wishes they grew on trees :)
-
That's nothing like what I had in mind!:D
-
I used the saw on my Juice XE6 to cut part of dead branch for poking duties while geocaching :D
Worked a treat too

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login