Mini Skeletool Mod Idea
-
Didn't know you used pliers head tools neil :D
-
Even I can't do everything with those tiny ones in the Champ ;)
-
Ironically I don't think the Squirt ones are much bigger. But useful they are!
-
They may not be much bigger but because they don't have the bulk of a large SAK dangling off the end, so I prefer to use them over most SAKs with pliers.
-
I have a PS4 and a Style CS, but alas, no T6 torx bits, else I'd try it :-\
-
Bad excuse Dave, go get one ;)
Neil, any reason you didnt consider the P(S)4 instead? Has more tools and is phsyically smaller
-
I like the carabiner. I had a Skeletool for a while and liked that feature. Problem was though that I'd hook it to a belt loop and forget it was there. Nearly went to collect my boys from school a couple of time with it still attached :ahhh What with its locking blade that could of got me in plenty of trouble.
If I had the money I'd take the Style CS, fit a pliers head and pop a thumbstud on the blade.
-
A thumbstud should be easy to fit on that seeing how the holes are already there
-
Indeed, its almost asking for one :)
-
*When I first started with Project Style CS, I contemplated installing a thumbstud on the stock blade and even did test fits, etc. For me personally, it was too close to the blade edge for me to comfortably open it quickly without slicing off my fingerprint. Could be I just have some fatass fingers lol. Anyway, I had extra blade steel, I wanted the shape to match the Skeletool and saw it not only as a way to fabricate an even longer blade, but also as a way to bring the thumbstud up and away from the blade edge. On that note... I have a brand new Stlye CS blade I'll trade for Style CS tweezers if anyone's willing. I lost mine on my road adventure to the east coast.....
~ evil ~*
-

Pliers, check
Style CS on the way from the US soon :ahhh
-
Thanks Andreas ! keep us posted !

Amazing how in less than a week one's idea is becoming reality ! Only in MTO !!
-
Willl be at least a week until the Style CS gets here though
-
Looking forward to seeing this one. :)
-
I hope the mod works. Thinking about trying it myself if it works. If you have to do any grinding or cutting to make it work please lets us know what was required when you do the mod. Thanks.
-
Style cs - check
ps4 - coming on the 8th
torx T6 - searchingWill post pictures when done.
(If my ps4 has screws.) -
I'm hoping your ps4 has pivots and not rivets. Look forward to any and all mods with lots of pics.
-
Thanks Tsquare. :) Does anyone if you can get a torx/security bit set at Home Depot or Lowes?
-
I see them there, but not sure if I remember them having the size small enough to fit the ps4 or stye cs. If you can find the mini bit drivers which they have near the checkouts you may be able to get the size you need in a kit cheap.
-
*I was asked more or less the same question back when I started Project Style CS and about five times since this post has brought the Style CS to the foreground again as to whether or not I could add pliers, for me or them, and if so why haven't I, etc. So, I thought I would address this here. The pliers mod is very straightforward and easily done actually. Should anyone want the mod done, I will gladly do so if they are willing to wait until my workload lightens so I can afford the spare time in which to do so. As to the question why haven't I? The answer is quite simple. When I started Project Style CS, I did so as a compliment to my Skeletool, not a replacement or mini version. I carried both as a working pair. If you read the posts way back when I started that project, the goal was to bring the Style CS up to par with the Micra which I had been EDCing for years, in hopes of replacing it. I made mention that with exception of a large flat driver, the two had the same tools. An issue that was going to be addressed in the second layer where the new scale is going to go. It was the fact that the Style CS <u>had </u>scissors that made me want it to use as a base for Micra replacement. While I know small pliers can be useful for certain small tasks, I personally view them as glorified tweezers, which I am totally not against either. No matter how well designed, their physical size limits their usefulness, for me anyway. I personally carry a swiss+tech 8-in-1. I ground the tips to mate perfectly. While they are "pliers", I don't see them as such, I see them as a kick-ass set of tweezers. If you want small rock solid pliers, the swiss+tech is hard to beat, if you ask me. Anyway, I hope his helps and addressed some of the questions I have been being asked.....
~ evil ~*
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login