Leatherman Mut
-
What's the lever on the bottom (near the cut hook) for?
-
Was discussing an idea on the Leathermanusa Facebook wall page, and wondering about that bronze scraper tool.
Is it sharpened enough to be used as an awl, or could it be?
Leatherman claims it is replaceable, so I'm assuming it will be user replaceable. And, as such, if an enterprising individual could fabricate an awl to be used in place of the bronze scraper too - yes?Since the thing is replaceable, and if it's user replaceable, having a fabricated awl wouldn't void the warranty.

Had to throw that in there while it was on my mind, again.
-
with proper music for a work of art :D
Thanks for sharing, video came from LM?
not sure, i will guess no since they've already release a presentation video some time ago

-
Leatherman USA on Facebook said the MUT gets released on the 15th of September.
Don't know if stores will have inventory before the 15th, or have to wait like everyone else. -
@Grant Lamontagne said:
Or the state of Michigan a number of years ago tried to classify multitools as "burglar's tools" so they could be outlawed!Silly politicians are everywhere, not just in Denmark! :D
Def
Hell Bob would be the crime king pin of Michigan then :D :D :D.
Would be a major operation separating Bob from his MT collection , in volume terms & blood-loss rendered :P :D :D.Media in Oz is on a big anti knife campaign latterly >:( >:( >:( >:(
-
I was just looking around on Amazon and saw that one of the sellers there is showing the MUT in stock. I didn't think these were even shipping yet.
-
Mut, MOLLE Tactical, Black by Leatherman
1 new from $148.99
http://www.amazon.com/Leatherman-Mut-MOLLE-Tactical-Black/dp/B0039B3KZY/ref=sr_1_17?ie=UTF8&s=hi&qid=1282967143&sr=8-17

Mut, MOLLE Tactical by Leatherman
1 new from $169.99
http://www.amazon.com/Leatherman-Mut-MOLLE-Tactical/dp/B0039BGIE4/ref=sr_1_18?ie=UTF8&s=hi&qid=1282967143&sr=8-18BO is cheaper?? ???
Tempted to get one, but no real use. The saw looks neat. That hammer though, one slip and YEEOOOWWCH!
-
The special Charter Member price for a MUT is way better then..

-
In case anyone missed it. . .
I am still taking preorders for the MUT.(and yes, Charter Members get a price break.)
Send a PM if you want more information or look up the thread in this forum or in the Charter Members Forum.
-
I wonder how easy it'd be to replace the punch, scraper and saw from the MUT with the scissors, blade exchanger and awl from a Surge.
Oh the temptation...

-
Been harping about wanting an awl with thread loop because of a boot issue I had when I was a wildland firefighter. Like them small awls on the PST, yet the Vista's awl is perty aggressive!
If was going to scrap a tool to take an awl from the Vista's awl would be my choice!
Thing is sharpened on both sides, and it would be great for boring holes. Yet a small awl might be a good idea to have too. With the blade exchanger in place of the scraper, you could have all sorts of extra tools there.Punch might make for a nice & sharp triangular heavy needle to screw in there (could double as a weapon too) - Mr510 prolly is already on top of that. :D
Scissors could be also placed into the blade exchanger, although don't know about the clearance issue if it was to be folded up. Where was you thinking of putting them?
-
@Xelkos said:
Scissors could be also placed into the blade exchanger, although don't know about the clearance issue if it was to be folded up. Where was you thinking of putting them?Well, it's a little hard to tell without actually handling the tool. But it looks like on the MUT, the punch and scraper are P shaped so they can wrap around the dual bit holders, but the saw seems to have a full slot similar to the knife so I think the scissors/blade exnchanger could fit into there. The scraper actually looks like it would make a GREAT awl, if only it were made of a tougher metal. Not quite sure exactly what I could do with the punch, at the very least I'm sure I could find a way to squeeze a bit holder extension on there for storage. We'll see what I come up with when I finally get one :)
-
The threaded triangular needle I was referring to was similar to an English glover's needle. Thread the end of that into the punch. >:D

Incidentally, the S needle I used with my Super Tool's awl to repair my boots (wildland firefighting days) a few years back & the nylon thread was recently found. Super Tool's awl, this S needle, and the same spool of government braided nylon thread saved my job & my foot!

Had to share it.

-
Leatherman obviously built these to be modular. I wonder why they aren't introducing additional componets with them. Adding a blade exchanger on the saw side would fit in with the modular theme though So it would make sense for that to be incorporated at some point. Any update on the release date?
-
Just checked Leatherman's page and Facebook page. No new release date. Has anyone heard anything yet?
-
No clue, but I am dying to get them in for fondling purposes....um...er....strictly professional...you know. :-[ :D
-
We kind of have a release date. This was posted on the Leatherman Facebook page.
Dale & Jon,
We have created a few hundred MUT's to date but have not shipped them yet! They should ship next week! With what information I currently have the release date should be sometime in the next 7-10 days. It will definitely be worth the wait! Let me know if you have any other questions. Michael @LTGWaiting, just not so patiently.
-
@Chako said:
No clue, but I am dying to get them in for fondling purposes....um...er....strictly professional...you know. :-[ :D'
No fondling the tools. Geez, what's with these hard core types and fondling tools and junk?
i.e. http://i850.photobucket.com/albums/ab66/Xelkos/buggers/LOL.png - NOT for the faint of heart! -
I don't have no M16 so they can take another few hundred weeks if they need to.

-
@sawman said:
I don't have no M16 so they can take another few hundred weeks if they need to.
What?! No free M16 with purchase? Grrr, canceling my order right now!

Some kid was posting a boycott earlier till I was explaining the employer NDA that most factories have. He got wise and removed the post. Guess he got canned tonight and was saying employees had to stand (no comfort) and make 20 parts of told an hour. He claimed other employees were crying cause their hands were bleeding. He was saying it was worse than some Turkish sweat shop he used to work for. Felt sorry for him, but he was protesting a boycott under his real name on facebook. Just wanted to keep him from getting into more issues than just being fired.
Better hope no one at Leatherman Factory has HIV, bloody tools makes for scary business! Does Leatherman sterilize their tools and autoclave them before shipment?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login