Charge Ti problem on Ebay
-
I am so sorry Mercury! I left you a good word for this person and I was wrong. I just checked the date code on the Ti i recieved and it is 2010 also. :'( The tool fooled me. It looked like a Ti to me so I did not check the code. I guess when things seem too good to be true, they usually are. I am glad you caught this though. Thank you and I will examine my tools more closely. I dont know who jen jen is but I will also let Ebay know.
-
Good to hear you are getting your money back. I still might be inclined to notify ebay of the fraud.
-
Sorry to hear it. Sounds like a cobbled together Ti, if it wasn't advertised as such then that's wrong.
It's not a fake though.
-
Was this the same seller who had a Charge tti I believe for $69.00. I was almost going to big on the Charge ti. I'm glad it all worked out for you in the end.
-
I don't blame anyone for the mistake except Jenjens supplier. She obviously doesn't know these tools and therefor shouldn't sell them. I am lucky to have caught a mistake and be refunded. I am glad to have warned everyone here about the problem as well. I don't blame the seller for the problem, so I won't submit a fraud complaint unless she ends up refusing my refund. If she does that she's in for it. Thanks for all the responses, they helped me blow off steam.
-
@waveman7 said:
Was this the same seller who had a Charge tti I believe for $69.00. I was almost going to big on the Charge ti. I'm glad it all worked out for you in the end.Same seller, I bought one. It was exactly as stated and was a TTi, just didn't have anything to go with it. She must go to pawn shops and flea markets to find her stuff and she just lists it as what they tell her.
-
I just contacted her myself and she appologized and offered me a refund also. I told her I would let her know as i will probably keep it as a user because mine was well done and the pin that stops the plier head is stronger. I do have to check out the SLVs though that I recieved. Does anyone know when they first made the SLV? Mine have dates of 07 and the smaller pin in the handles. They seem to be correct though. Thanks
-
@stack said:
I just contacted her myself and she appologized and offered me a refund also. I told her I would let her know as i will probably keep it as a user because mine was well done and the pin that stops the plier head is stronger. I do have to check out the SLVs though that I recieved. Does anyone know when they first made the SLV? Mine have dates of 07 and the smaller pin in the handles. They seem to be correct though. ThanksThe SLV's that I've seen have 07 date codes.

-
Thanks so much. So I think my slvs are ok then. Seems the Tis she has are the only ones with the newer handles. Could these be refurbished tools from leatherman with the stronger pins that stop the plier head? I asked her to give me a follow up on what she finds out so I hope she does. Dave
-
Seems to me that they wouldn't replace handles for warranty work, they would just send a newer model as a replacement. This seller has contacted me after reading this thread and seems quite upset at the publicity it has garnered. I think she is honestly unaware of any problems with her listings and she will most likely do more research in the future. I don't feel I have been screwed, more like she has been screwed. On the flipside it is good to know that ebay sellers can be aware that online communities like ours talk to each other and karma has it's affects. She didn't do me wrong in as many words, so I will not be filing a complaint with ebay.
-
Ive always thought leatherman gave a replacement tool for a broken tool but but I have also heard of folks selling tools that are refurbished or factory seconds. When she responded to the message I had sent her , I got the same impression that she had no knowledge of any wrong doing and for her to offer a refund tells me she is honest and backs up the products she sells.
-
I would blame the seller. You should know about the items you're selling, and it's extremely, extremely easy to go up on Leatherman's website and take a look at the actual makeup of the tools.
-
My SLV has 0607 and 0707 date codes.
Best - Joe
-
The condition of the item is one thing, but "technical details" are something you should never assume are correct when buying things from ebay. Many ebay sellers are not experts in what they sell, but people who are trying to make a few quid.
If you want guarantees and expertise then buying from private ebay sellers is the wrong place to be, you need to be at mainstream retailers (some of whom do sell on ebay incidentally) and of course you'll pay a premium for that.
It is however not fair to say that every seller who misrepresents (particularly 2nd hand) items is a fraud or the spawn of the devil. More often than not, problems like these can be solved by communication. One previous unhappy customer of all those shown in this seller's feedback, is nothing to read into at all - every seller will sell something to a complete a-hole sooner or later!
Just my two-penneth.
-
The tool is actually configured correctly for a Ti though, right? So unless the seller was savvy enough to look at things like date codes, why would they question what they had if they had bought it used to begin with? Honestly, I probably wouldn't have noticed anything other than the roughed-up parts.
Then again I've been known to buy tools with only a fuzzy picture from airport seizure auctions, so I'm not horribly picky...
-
Was this the same seller who had a Charge tti I believe for $69.00. I was almost going to big on the Charge ti. I'm glad it all worked out for you in the end.
Same seller, I bought one. It was exactly as stated and was a TTi, just didn't have anything to go with it. She must go to pawn shops and flea markets to find her stuff and she just lists it as what they tell her.
I bought the other one (there were 2 on the auction I won in June) It was in a little rougher shape than the NEW description, but was in pretty good shape for paying half-price!
I used a dremel to polish the few wear-marks off. Good as new.
-
Like I said, I don't blame her. I was just a little angry at first, but it only took one calm reasonable message to get her to refund me. She is a very nice person and after this issue, I am certain she will be looking into her items a little better. I always make sure that what I am selling COMPLETELY matches the description because I like to do things right. If I were to sell this same Charge replica on Ebay, I would state that it is a rebuild in the configuration of a Ti and that it is in workable condition. That way someone who doesn't mind that it isn't factory could buy it. I just wanted a Ti that was factory because they are retired. I am not angry(anymore) and I am happy that it is going to work out. I am heading to the PO now to mail it back to her.
-
Good to hear its working out. I hope she's covering return postage as it was her error.
-
So was the tool itself fake, or just "scrambled"?
I actually feel sorry for her, she's going to have to refund a lot of money as several people bought one.
I took another route when I bought a fake Gerber off ebay. I sent an email to Gerber with a link, sent the guy a message telling him to piss off and gave him negative feedback.
I knew it was fake though and only paid 4 bucks which it was more than worth, but I couldn't let him continue selling fakes to people who thought they were real. That guy was also not a normal guy as much as one of those giant sellers on eBay, and he had a bunch for sale. He still sells the same ones, but no longer under the pretense of being Gerber. It wasnt eve a real Gerber model, just a generic chinese MT with the Gerber logo stamped on, so I guess it was easy for him to tell his supplier to add another logo
-
@Neil said:
Good to hear its working out. I hope she's covering return postage as it was her error.I didn't ask her to. Seeing as it is a rebuilt of moderate quality using actual LM parts, the whole issue with me is that it isn't original factory production. I think that paying the return shipping is a small price compared to losing my $46 on a tool that isn't what I want and I will not even carry.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login