What Did You Use Your Multitool For Today?
-
Used my EDC gear (lm squirt P4 and vic swisscard lite) to give my beyerdynamic dt770 headphones a real cleaning. Removed hair from the membrane that caused noises when there was bass present
-
ST300 flat screw driver to open a cash box which key i lost 10/10

-
Gerber shard philips end to quickly tight up screws on rear view mirror on fork lifter!
-
I havnt had my current car that long , its a Ford 2litre mondeo . The rear window washer didnt work from the start and yesterday the front washers packed up too :(
This was a job for Super... no hang on not supertool but PST :D and bit adapter .
Its was really awkward to reach and the problem wasnt obvious until I'd removed countles screws and removed panels .




Heres the problem , its just the pipe came off , I was worried there was a split in the pipe or worse the tank had split . So a simple job but not easy to access . I had to remove the front offside air intake and put my right hand in through it with the pst pliers to grasp and hold the pipe while my left hand went in under the front wheel to push the fitting into the pipe .....



My little LM Monarch 300 was just the right tool to help me see what was going on . Despite being a very bright sunny afternoon it was really hard to see inside where I was working .


Last pic of the tools I used ....

Dunc
-
Used the phillips on my Trailmaster to open a geocache. A friend solved the puzzle at home and the outdoor part of this cache fit on our tour, so we did it. I didn't know that any tools were required, and my friend missed that part in the description and was unprepared, too. No problem with the Trailmaster

Dunc, thanks for the pictures! I just got the bit adapter for my PST II from my father. He lost his PST
but not the bit adapter, now I can have it :D. I couldn't figure out how to put it on the PST II (but haven't tried hard yet, and didn't any research ::)) I think with your pictures I can figure out how it works 
-
Got a Signature Lite from Neil yesterday which saw some use today

-
Used my Swisschamp (with illumination help from my L0D) to fix a friend's closet door. The bottle opener did some prying, pliers and wire cutter both saw some action, and the Phillips tried it's best to do it's thing. The driver kept collapsing whenever I used enough force to actually turn the screw without slipping (in it's defense, said screw was REALLY tight) so wound up having to use a dedicated driver :(
-
I used my wave to stab into my leg last night. Yep use the wrong tool for the job and the wave gets mad and bites.

My toolbag was too far away at 8 feet for me to walk allllll the way over for my screwdriver. :P -
-
I used my wave to stab into my leg last night. Yep use the wrong tool for the job and the wave gets mad and bites.

My toolbag was too far away at 8 feet for me to walk allllll the way over for my screwdriver. :PGood work buddy..

:D :D
So it's no longer "Now you're ready," nor "Now you're rusty," but "Now you're bloody?" :D
-
I used my Charge TTi to swap a cracked 13 amp plug for a new one on a lamp for SWMBO.
I did NOT stab myself in the leg.
;)
-
:D
-
Just used the tiny screwdriver on my Leatherman Charge to take off the battery cover on a free Nesquix stirer upperer thingy for the kids, but when I put the batteries in the thing - didn't work.
-
Didn't use it for anything yet, I just woke up GEEZ! Give me a while before you go asking me these questions. I do however plan on stopping by my Mom's place later today so there's a good chance it'll get used. She always finds me excuses to "play with my toys" as she puts it.
-
Got my PS4 yesterday and it has already had stuff to do:
Tighten my moms eyeglasses when I was home for a 3 hour visit (actually that was the P4, but the screwdriver used is now on the PS4...)
Used the pliers to help get a bunch of Dremel accessories out from the box they come in - the kind of box with plastic clamps to hold them in place that might be a bit stiff.
Pliers again, tighten Dremel chuck
Used the blade to remove the Lite scales off my Signature Lite (reason will be apparent soon) -
My sister's BF used my champ driver to replace the flint in his Zippo. I used the scissors and file for some fingernail work.
-
Just used my trusty SwissChamp to do this....
http://www.youtube.com/watch?v=MIfpvJV7Zdo
Imagine what could I do with ST Spirit or Wave....
>:D

-
I used my Pulse to repair a guest's glasses today. I inserted the micro screw with the pliers, then tightened it with the tiny flat head.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
