Micra/Squirt bit driver idea
-
-
Ok so I think it's best to continue this in this thread.
This morning I found out that if you grind the sides of the flathead screwdriver/bottle opener on the Squirt, it will fit the bit adapter I have from a fake Gerber Suspension, which attaches to the Phillipshead driver on the multitool it came with. I did this to my PS4 with this result:

So I ventured out to find if the official [ for the ST300, Juice, Fuse etc would also work. Some well equipped fellow forum members replied yes in [url=/topic/22537]this thread](http://www.leatherman.com/accessories/product/Removable_Bit_DriverLeatherman removable bit driver[/url) and some more discussion came from it.
That lead me to an idea of a "kit" that fits a whole range of stuff. It would consist of the existing removable bit driver, which would also fit on the Squirt models. That puts the Squirt in the same category of bit capable tools as pretty much any Leatherman (with various adapters), be it the old large bit adapter, the removable bit driver for the flat bit extender (for the Charge, Skeletool etc).
The new part my idea includes is a small hexagonal tube that turns any normal hex driver into a microbit driver, which is smaller at 4mm "diameter". Such small bits are uncommon but actually standardized, and you can find various kits. The Victorinox Cybertool/Swisschamp bit driver also uses these 4mm bits. They are often more "delicate" and are available with smaller tips than normal hex bits, intended for electronics use and such. Personally I have this kit:

Here are some 3D Google Sketchup shots of my idea:



parts pulled apart. From the back: Squirt PS4, removable bit driver, microbit convertor tube, 4mm microbit
convertor tube inserted into removable bit driver

all the parts included the 4mm microbit "asembled" -
-
Thank you, I actually had the model from the first bit driver idea and played with it throughout the day to learn the program. Fun, but also annoying to get it to do what you want. Starting to get the hang of it with all the different ways of bending shapes, which makes it more fun to post the results when it actually looks not too shabby
Anyways, I actually made myself a microbit driver. Not like the one in the model, because that one would have to be manufactured from scratch. Instead I "disassembled" the one that came with the microbit kit, which actually almost fit the Phillips head screwdriver
I swear LM is doing this on purpose to hive me something do do
First the bottle opener fit a standard hex bit adapter, now the phillips fits this... Awesome!The result works. Well. Very well. Got 150+ bits of various sizes and shapes to use with the PS4 now! Will be using the microbits mostly so I don't apply too much torque using large bits on large screws and ruin anything :ahhh
So, pics:



-
*Some nice ideas there Andreas. Shortly before I began the bit card project, I made an adapter that converted the large bit driver into a 1/8" bit driver. It worked well enough and I was even able to store 2 bits for every one of the normal ones. I opted to make bits that would fit the large bit driver since I was removing the small bit driver and wanted to come up with a system that would work with all of the larger tools that I have. If I find pics of it, I will post them.....
~ evil ~*
-
-
-
-
-
-
There was one that came with the 4mm bit kit I got. Plastic one where you were supposed to insert the long metal bit with the bit holder at the end:
http://www.clasohlson.no/Archive/Images/Products/Hi/40-7432_2010-07-12_105026_333.jpg (plastic thingy on the right)
Of course that bit holder is not with my PS4. It will probably fit your spare CT bit holder if you want it
-
-
-
-
-
So long as he has provable good reason to carry (i.e. for work) its not an issue but casual carry is not allowed.
-
-
-
-
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
Have you given it a test run yet? How do you find the driver being off to one side affects use? I know I find that an issue with the larger Cybertool models.
On my personal CT I made a point of centralising the driver. Even then I'm not too happy. My favourite CT is my single layer one 
