Surge Owners Club
-
@Xelkos said:
Is this normal, and needing worked in more?Really notice the handle slap with the hefty mongrel, will take some time to get used to it.
*Yes, it is normal. With this design the spring is under no pressure when the scissors are folded up, only when fully deployed. Another work around is after partially deployed, continue unfolding, pressing on the tip until in the locked position, spring will pop into place. Anyway, that is what worked for me... that is, when my Surge actually had Surge scissors
As for the handle slap, that bugs the hell out of me on any of my tools. Nothing a few well placed shims won't fix.....~ evil ~*

-
@Xelkos said:
Is this normal, and needing worked in more?
Really notice the handle slap with the hefty mongrel, will take some time to get used to it.
*Yes, it is normal. With this design the spring is under no pressure when the scissors are folded up, only when fully deployed. Another work around is after partially deployed, continue unfolding, pressing on the tip until in the locked position, spring will pop into place. Anyway, that is what worked for me... that is, when my Surge actually had Surge scissors
As for the handle slap, that bugs the hell out of me on any of my tools. Nothing a few well placed shims won't fix.....~ evil ~*
Wonder where those well placed shims would go.

Your Surge mod: /post/384960
/wants
Only the ST300 I have is silver, the Surge is BO. :lol: -
@Shane769 said:
Yeah it is normal that the scissors need to be slightly open before they will lock into place. I will say that I am a former Surge owner

I'm a new Surge user and I hold the Surge for less than one month before sent back for warrenty purpose. I faced the same issue at the scissors side.
Have you check the land yard clip status. Mine can not fully deploy.. -
Yeah it is normal that the scissors need to be slightly open before they will lock into place. I will say that I am a former Surge owner

I'm a new Surge user and I hold the Surge for less than one month before sent back for warrenty purpose. I faced the same issue at the scissors side.
Have you check the land yard clip status. Mine can not fully deploy..Is this a fully deployed lanyard ring? Seems a bit short compared to other tools.
Had to use the Style CS' nail trimmer file to push the ring back up past the end of the tool, from inside the tool exchanger channel. Then grabbed what I could and pulled out.The ring doesn't want to be pulled out any further.
-
-
-
@CumminsDiesel said:
I'm a Surge user too
Nice sheath you have there..
Collected my Surge from the local dealer for warrenty issue on scissors and lanyard ring.
Scissors - slightly better
Lanyard ring - same as beforeThey replace a display unit for me, although it is older than my new surge but I found that
this replaced Surge has better quality. (less loosen) An the best part, I got an extra wooden
saw + original packing box (yellow). -
@CumminsDiesel said:
I'm a Surge user too

Nice sheath you have there..
Collected my Surge from the local dealer for warrenty issue on scissors and lanyard ring.
Scissors - slightly better
Lanyard ring - same as beforeThey replace a display unit for me, although it is older than my new surge but I found that
this replaced Surge has better quality. (less loosen) An the best part, I got an extra wooden
saw + original packing box (yellow).Yeah,thank you for great sheath!Really like it.
My Wave has a better QC than Surge.
Every Surge unit I replaced was with the same bad quality.
I like quality of ST300,much better
-
Was cutting some light stuff today when I felt the handle wiggling or something, and was wondering if anyone else has noticed this odd peculiarity.
With your Surge closed, open the scissors (facing up).
Then operate the scissor handle back and forth and see if your serrated blade moves back and forth in the handle.Mine seems to make the serrated blade move from the right side to the left when the scissors are clamped, then the blade moves back to the right when the scissors are reopened.
Maybe mine's possessed, or it had a bent pivot joint, unsure. Thought I'd ask if anyone's notices this peculiarity on their Surge too.
If could get my new Olympus camera to work like it claims it should half the time, I could record a small movie clip. Knew I should of stuck with the Sony Cybershot - least I wouldn't have to take 20 macro shots to get one good picture.
-
@Xelkos said:
Was cutting some light stuff today when I felt the handle wiggling or something, and was wondering if anyone else has noticed this odd peculiarity.With your Surge closed, open the scissors (facing up).
Then operate the scissor handle back and forth and see if your serrated blade moves back and forth in the handle.Mine seems to make the serrated blade move from the right side to the left when the scissors are clamped, then the blade moves back to the right when the scissors are reopened.
Maybe mine's possessed, or it had a bent pivot joint, unsure. Thought I'd ask if anyone's notices this peculiarity on their Surge too.
*Hey Xelkos. First off, double check the tension of the pivot bolt to see if it is adjusted correctly. After that, if you are talking about the knife moving that is opposite of the scissors before they are in the locked position, yes, quite possible you have a bent pivot bolt. If that is the case, more than likely it is the male end of the sex bolt. They bend out of whack pretty easily and create pressure points that make it bind instead of the pressure being evenly distributed. Couple of things you can try... you can take it out and carefully straighten it. Sometimes, simply removing the pivot bolt and reversing it reduces this issue, depending on which tool you use more often. If you want the nodule on the liner lock to apply more initial pressure to keep your blade in place you can remove the knife and pry out the liner lock a bit and then re-install knife. Keep in mind it will take a little more effort to break the free of that pressure. Hope some of that made sense and helped a little bit.....
~ evil ~*
-
-
-
-
2HO..

-
I have several other leathermans costing more, but my Surge is by far my go-to at home heavy duty knife. I have the replacement blades for when i need them and despite it's fit and finish issues compared to some tighter models, it handles everything i throw at it. Had some grip comfort issues when sawing through wood for a solid 5 minutes but it got it done fast and still sharp. A great, no fluff, versatile workhorse. It also saved my choking dog's life last month!
-
How did you save your choking dog with a Surge? Poor ole fellow! Glad he is ok now!
-
@theblackabbot said:
How did you save your choking dog with a Surge? Poor ole fellow! Glad he is ok now!The story is on the leatherman site... But my puppy got his collar snagged in our older dogs mouth. They both panicked and choked the puppy out. His collar wouldnt come undone so i used the serrated safety tip blade to get under and cut it off. He snapped to a few seconds later thankfully
-
Surge to the rescue!!

-
-
How did I miss this thread until now!? Count me in too please!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
