Show your slip joint's thread!
-
sergemaster,
I understand bud, happens to me as well from time to time. Just wanted to make sure you knew what it was you actually had if you didn't.
nuphoria,
Thanks.....though I have to say it's due for a major overhaul and some massive organization. If you think my Gun Bench looks cluttered you should see the rest of it. It's a mess. I'm in serious need of proper storage.
And them 123A cells, don't you worry, they are dead as a door nail. I don't throw them in the household trash (or, at least I try not to) so dead ones sit there until I can get them properly disposed of. And due to me being absent minded from time to time I put them in the ashtray so they don't get accidentally mixed up with good cells. If they are there they are dead.
2xTap
-
2xTap,
Thank you for taking the time to post pics of your slip joints. I collect fixed blades and as of recently have been collecting slips. Trappers are a weakness of mine and that Bear and Son Green Jigged Bone is beautiful! And the price...

Stockmans are also on my list of wants.
Like you I keep the boxes the knives come in and when I sell a knife to someone, they seem surprised it comes with the original box and paperwork.
-
This puppy arrived yesterday from my bud Mike over at CollectorKnives.net and it is a impressive knife.
GEC Northfield "Yellow Rose" Cattle Rancher.....



The Cattle Rancher is a new Stockman pattern from Great Eastern Cutlery. Their previous pattern was the Cuban Stockman. And like the Cuban before it the Cattle Rancher sits in at 4 1/8" closed. Unlike the Cuban before it this Cattle Rancher has noticably broader blades and that big Clip as opposed to the slimmer California Clip style on the Cuban........
TOP: Cattle Rancher / BOTTOM: Cuban:


The grooved bolsters and the "Rose" shield are nickle/silver, liners and pins are brass, and the brushed finished and swedged blades are 1095 Carbon Steel. Bone on this is the typical Yellow Bone found on the "Yellow Rose" series but this one and it's brother the Cattle Baron are the first in the series to have jigging. And personally I prefer the smooth Yellow Bone they have used before. For a user the jigging makes sense as it gives better purchase in the hand, but from a strictly asthetics stand point the smooth Yellow Bone looks alot better.
F&F is excellent, can't find a fault. Blades have perfect grinds and the edges are ground even and are user sharp, blades are sans any form of play, backsprings are stout (noticably so on the mainblade) and the springs remain flush with blades opened or closed, brushed and polished finished areas are flawless, and there isn't a single gap to be found anywhere on this piece.....

In the F&F department you can't make them much better than this. This is the Stockman the Cuban should have been. And while the Cuban is an excellent slippie the blades on the Cattle Rancher are much better.....at least for me as I prefer the broader blade designs and the long master pull.
The only thing that could really make this pattern truely excel is if they make them in 440-C. I truely hope they follow what they did with the Cuban and come out with some GEC brand versions in stainless. If so this could be the one pattern that might supplant Case's Gunboat Canoe as my all time favorite pattern.
2xTap
-
Awesome rancher 2xTap!
I recently ran across a little cattle knife that caught my eye at a dealer website. It was a Shapleigh brand three blade equal end cattle knife in green bone. It is about 3 3/8" long closed with a main spear point blade, sheepsfoot with long pull and a little pen blade. It looked fairly well made so I bought it for about the price of a new Case knife to give it a try. It was the only one in bone they had (I think there was another in some sort of horn).
The knife was said to have been assembled in the Friedrich Olbertz factory in Solingen, Germany in the 1990s or thereabout. I believe this is one of those Parker knifes that were "supposedly" put together from some old "discovered" parts from the closed Krusius Bros. knife factory. Who knows.
Anyways, I bought it because I liked it and it had carbon blades. That's all. This is also my first German made knife. I'll have to say it is very well made. No gaps between the brass liners and springs. No blade wobble at all with good walk and talk. It has nickel silver pins and the the same shield on both sides that appears to be pinned. A first look it reminds me of some of the Schatt & Morgan knives I have picked up in the past. The bone jigging and color is done very well. All three blades sit well and there is no blade rub either. Fit and finish is really high with just a couple exceptions I will mention next.
It did have a couple of minor QC issues. One pin is a bit proud but not sharp or uncomfortable and the swedge on the sheepsfoot was ground a bit rough. I was thinking of mailing it off to someone to fix these couple of things but I may try sanding the swedge myself since this will be a user. The main blade has an etch that says Shapleigh on it that I will remove so when the blade patinas you don't see it anymore. I think it would have been more attractive without the etch.
All in all, I am very pleased with this little cattle knife. I am wondering if any other folks have any of these Shapleigh reproduction knives since I really have not noticed them before. I am sure someone here does have one or more.

-
Lovely as always

-
TFF,
That is a sweet Shapleigh bud. Got any pics of it with the blades fanned open?
A few years ago these were popping up quite a bit on Ebay, I had run the auctions on three different ones of the same pattern you have......all in Buffalo Horn. I lost on all three and never tried for any more. Still ain't got a single Shapleigh in the collection yet.
2xTap
-
Here's a few of mine.
Schrade Old Timer 50th Anniversary Jumbo Stockman


Kutmaster Stockman

Boker 140 Year Anniversary Gray Jigged Bone Trapper

Boker Beer Barrel Stockman

-
That giant Old Timer is amazing! :D
I don't think we'd be allowed to carry that here >:D
-
I knew I shouldn't have clicked on this thread...now I have the jones for more slippies >:( ::)
-
-
I saw the Schrade at a flea market for $50 and passed on it. I saw it again in a Smokey Mountain Knife Works catalog, for much less money, so I grabbed it.
I was going to post "Those aren't slip joints...here's a slip joint ----->" but that sounded, what's the word, cheeky? :D
The blades are sharp and it is the real deal. Strong back spring and I've ripped a finger nail off trying to open the main blade.

-
@Spork, Lord of Lime Jello! said:
I knew I shouldn't have clicked on this thread...now I have the jones for more slippies >:( ::)
Me too :D
As luck would have it, I have one on the way.... my first custom 8)
No fair!! Tell us more !!!!
I can't.... I'm too excited :D :ahhh
It will be here in a couple of days hopefully, then I'll spill.... promise

-
@Spork, Lord of Lime Jello! said:
I knew I shouldn't have clicked on this thread...now I have the jones for more slippies >:( ::)
Me too :D
As luck would have it, I have one on the way.... my first custom 8)
No fair!! Tell us more !!!!
I can't.... I'm too excited :D :ahhh
It will be here in a couple of days hopefully, then I'll spill.... promise

Tease!!! :D
-
OK... small tease :D
Maker is Polish, called Yahoo... hard to find online with that name! His work is often posted on a Polish knife forum. I bought it used so it has a tiny dink on it, but that's why I could afford it!
It's a green micarta slippie and I UK legal too :)
Pics soon.....
-
I can't.... I'm too excited :D :ahhh
It will be here in a couple of days hopefully, then I'll spill.... promise

Cool! Congrats! Can you at least tell us the location of the maker? In the UK or US?
Howdy specgrade,
Nice ol' Kutmaster stockman!

Hello texasflyfisher,
Thanks, I picked it up at a garage sale for $5. I've read that the jigged bone handle variety are hard to come by. I guess Kutmaster isn't collected as much as other brands.
-
@nuphoria said:
OK... small tease :DMaker is Polish, called Yahoo... hard to find online with that name! His work is often posted on a Polish knife forum. I bought it used so it has a tiny dink on it, but that's why I could afford it!
It's a green micarta slippie and I UK legal too :)
Pics soon.....
Ha Ha found it! Looks great, no it looks fantastic!

-
You sneaky monkey :D
Yeah, I think it was a good buy.... we shall see :ahhh
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login