What Did You Use Your Multitool For Today?
-
Nice one edcgear! Everyone else... get a camera

Used my PS4 and c33l + the PS4's microbits to open up my ITP A3 EOS. It's been unstable from the start, flickring and cutting out, before finally going dark for good. Thought I'd open it and see if it was just a quick fix, and it was a wire that needed to be soldered back in place

-
@Andreas said:
Nice one edcgear! Everyone else... get a camera
Used my PS4 and c33l + the PS4's microbits to open up my ITP A3 EOS. It's been unstable from the start, flickring and cutting out, before finally going dark for good. Thought I'd open it and see if it was just a quick fix, and it was a wire that needed to be soldered back in place

Yup... Pics are mandatory!!
;) :D -
I worked on fixing some porch columns yesterday. I used the blade on my Skeletool CX to remove old latex caulk/sealant and the flat bit to open a can of paint. I used the saw in my Spirit X to cut some small sections of wood that I was replacing.
-
I used my skeletool CX to open up the mail which included my brand new Charge ALX and MTO watch from Zed. :D I used the small screwdriver on my ALX to adjust the metal watch band to the correct size. I also used my Style CS scissors to cut the tags off a new pair of Crocs.
-
I used my Wave to tighten a door handle and to trim my beard.
-
I guess page 107 deserves some pics as well... This thread is the perfect example of why the (not so) old term "pics or it didn't happen" was invented :P
Anyways, Gamestop had a used Game Boy Advance for sale a couple of weeks back, so I picked it up. There was no charger and a scratched casing, so I bought a charger, replacement casing plus a special tri-wing screwdriver from DealExtreme. The package arrived today and the PS4 helped switch over internals.




-
I loved my old GBA SP.
Anywho, I just used the mini-driver from my Swisschamp to push the scissor spring out of my CT-34, and used the Skeletool CX pliers to press the spring into the Swisschamp's pliers replacing my broken spring. Gotta love using a broken multitool to remove parts from a good multitool to fix itself, with assistance from a third multitool lol. -
Used the screwdriver on my Victorinox Spirit X to replace all the broken latches and hinges on a couple of 100qt coolers that my son's middle school band uses on trips.
-
Used my Style CS to cut bandaging for my wife's thumb wrap - she messed it up royally at work when she fell :-\
-
Used the Skelly to open up a couple packages of Eneloops. Man that blade is sharp.
-
-
I used the blade on my wave to scrape some hard water residue that has been stuck on my faucet for a while now. It finally drove me nuts and I attacked it. Much to my surprise, the wave's blade dulled very little and just needed a light touch up afterwards. I also used the blade on my pulse to cut some really stubborn plastic stripping today, pleasantly surprised there as well. I pushed it to the max and you can't even tell.
-
I used my Vic Cybertool 29 to change the pocket clip on my Emerson custom CQC-14.

-
Today I used my LM Surge (my least favorite mt) to open a box of water pumps. I then used the pliers and screwdrivers to make sure they were ready to use.
-
Well first off, it was the Pulse/Wave combo all day. I have been trying this for a few days and it is working beautifully. I first used both the pulse and wave with bit kit to build a store bought cabinet that stands above a standard toilet. It took a while but I put tremendous torque on the wave's bit driver because a screw stripped out. It held up great, but to be cautious I used a ratcheting screwdriver to finish that one off. I then used the wave to hammer in a plastic drywall anchor, and used the serrated blade to cut off the other stubborn anchor as it just wouldn't go.
I then decided that the switch that came on my desk lamp needed to go, as it was intermittent. I used my wave to disassemble the existing switch, and from there I cut the cord in two places because the first time I spliced the wrong one into the switch, then I proceeded to ruin a butt splice, cut my finger, end up splicing in two spots, and cover the cord in electrical tape all to put a $3 switch on a $10 lamp. Man it was fun though!
-
The Skelly and Spirit S double teamed the bolts on my Powerlock whilst fiddling with implement combinations. Really wish I could fit scissors in there some place, but oh well.
-
@thebullfrog said:
The Skelly and Spirit S double teamed the bolts on my Powerlock whilst fiddling with implement combinations. Really wish I could fit scissors in there some place, but oh well.That's why you need a Style CS

-
Used my Style CS to cut bandaging for my wife's thumb wrap - she messed it up royally at work when she fell :-\
I hope she heals up OK. :-\
Thanks Gareth, she seems to be healing up ok and she painted her other fingernails purple to match the bad thumb

LOL, that's really rather cunning.
:D
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login