What Did You Use Your Multitool For Today?
-
On my knees in the bathtub replacing the drain trip lever assembly. Brought a phillips driver to remove the old but wouldn't you know it upon removing the new one from package I found it had slotted screws. My Vic Ranger rode to the rescue and saved me a trip to the garage.
-
Old Farmer and a Squirt saw conker duty. An old Soldier fitted the head on to a yard brush. Scientist took apart a CO detector. Custom CT helped repair a couple of phones.
Sorry, most I can figure out- Conker duty?

I don't think the answer will be remotely close to what we think it is.
-
Old Farmer and a Squirt saw conker duty. An old Soldier fitted the head on to a yard brush. Scientist took apart a CO detector. Custom CT helped repair a couple of phones.
Sorry, most I can figure out- Conker duty?

I don't think the answer will be remotely close to what we think it is.


-
Today I needed a plotter pen for a desktop CNC mill so I could trace out some lines on a piece of hardboard. Thought I was stuck, with nothing suitable to hand until that Doh! moment when my Vic Signature Lite came to the rescue...pulled the pen out of it, and found it short enough to get in the space, and a good fit in the chuck thingy. Just as important, the pen didn't collapse under the abuse and was still a good fit when I took it out of the mill and put it back in the Vic where it belonged




-
@thermox said:
Today I needed a plotter pen for a desktop CNC mill so I could trace out some lines on a piece of hardboard. Thought I was stuck, with nothing suitable to hand until that Doh! moment when my Vic Signature Lite came to the rescue...pulled the pen out of it, and found it short enough to get in the space, and a good fit in the chuck thingy. Just as important, the pen didn't collapse under the abuse and was still a good fit when I took it out of the mill and put it back in the Vic where it belonged

-
@thermox said:
Today I needed a plotter pen for a desktop CNC mill so I could trace out some lines on a piece of hardboard. Thought I was stuck, with nothing suitable to hand until that Doh! moment when my Vic Signature Lite came to the rescue...pulled the pen out of it, and found it short enough to get in the space, and a good fit in the chuck thingy. Just as important, the pen didn't collapse under the abuse and was still a good fit when I took it out of the mill and put it back in the Vic where it belonged

-
Used my ST Spirit to cut and strip some wire... Then used pliers to pull out actual metal wire (dont know right term) and replace broken fuse on FUCHS machine....
For all you
-ers I didn't have a cam with me.... So, no pics this time... -
Got my spirit today, love it, and used it to cut some bread and spread some butter on a sandwich.
-
Old Farmer and a Squirt saw conker duty. An old Soldier fitted the head on to a yard brush. Scientist took apart a CO detector. Custom CT helped repair a couple of phones.
Sorry, most I can figure out- Conker duty?

See here :)
Today I needed a plotter pen for a desktop CNC mill so I could trace out some lines on a piece of hardboard. Thought I was stuck, with nothing suitable to hand until that Doh! moment when my Vic Signature Lite came to the rescue...pulled the pen out of it, and found it short enough to get in the space, and a good fit in the chuck thingy. Just as important, the pen didn't collapse under the abuse and was still a good fit when I took it out of the mill and put it back in the Vic where it belonged


Indeed

-
I used 5 straight pins from 5 different SAKs to pin off (?) our new curtains :D
-
-
I used my pulse to weigh down my belt tonight as I ran for cars(I run the Valet department for a large hotel and we had a wedding with 300 cars!). Hopefully soon I can transfer back to Security, because I really hate Transportation/Valet/Bell. Sure I'm the boss, but it still sucks.
I also used my new Juice SC2(in blue) to cut a few things. I am really liking this little guy.
-
Used my Juice to open the box from Heinnies with my new Fenix LD10 R4... :ahhh :ahhh
Excellent flashligt I might add..

-
Charge ALX:
- Open and fill chain lube on my Stihl 026. Chain adjustment too.
- Removed old twine tied to fencing.
- Removed 5mm seat bolt on Ducati 996 to add coolant
- Tightened 4mm bolts on Ducati Multistrada bodywork
(4mm and 5mm are on the same bit, which is always in one bit driver. Combo Phillips/Standard driver in the other)
- Almost forgot! Removed burrs on the chainsaw chain.
-
Charge ALX = one smurfing great tool

-
Some more fencing work today:


-
Thanks
those are some GREAT shots! :D -
Your gloves looks like new!!

-
Used my Spirit pliers to undo a Maillon in Rope rescue training yesterday .
Dunc
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login