Holiday give-away
-
Wasn't there an article on sosak comparing them ???
-
@micky d said:
Wasn't there an article on sosak comparing them ???
Yep...
I knew I was a genius. :D
-
@micky d said:
Wasn't there an article on sosak comparing them ???
Yep...
I knew I was a genius. :D
That may be over stating it :D
-
@micky d said:
@micky d said:
[quote author=Benner link=topic=3028.msg43286#msg43286 date=1198254434]
Wasn't there an article on sosak comparing them ???Yep...
I knew I was a genius. :D
That may be over stating it :D
Don't know about that. After all he had the brains and good sense to come here :cheers:[/quote]Thats a poor argument...but ok :D
-
@micky d said:
@micky d said:
[quote author=Benner link=topic=3028.msg43286#msg43286 date=1198254434]
Wasn't there an article on sosak comparing them ???Yep...
I knew I was a genius. :D
That may be over stating it :D
Don't know about that. After all he had the brains and good sense to come here :cheers:[/quote]
Exactly. ;)
-
It won't take you long either,to get obsessed about trying to track down all the makers of the 108mm GAKs,and having an example of each,then it'll spread to getting one of every 108mm Vic.
-
Good luck with that:
Add to that the new one that will likely be available soon with the new opening hole and liners and you have a pretty hefty list!
Def
-
I have been tempted for a while now to get a 108mm as the blade doesn't lock, but I was never sure if the blade was shorter than 3" or not?
-
@Benner said:
I have been tempted for a while now to get a 108mm as the blade doesn't lock, but I was never sure if the blade was shorter than 3" or not?It depends on the measurement point. If you just measure the actual cutting area of the blade it's under 3" by a fair margin. If you include the tang as well (or at least the part sticking out from the handle), it's over 3".
Def
-
I have been tempted for a while now to get a 108mm as the blade doesn't lock, but I was never sure if the blade was shorter than 3" or not?
It depends on the measurement point. If you just measure the actual cutting area of the blade it's under 3" by a fair margin. If you include the tang as well (or at least the part sticking out from the handle), it's over 3".
Def
Thanks for that.
I am sure law here stipulates that it must have a cutting edge of less than 3" so I might get away with that one.
-
If things went south you could certainly use that as an excellent argument in front of the judge as well. Provided you weren't doing something silly with it I doubt any LEO's would really want to make a big deal of it and go through the effort of writing a report and appearing in court etc.
Def
-
I have just looked at that article again. What is that extra metal piece in the picture? Is it a cover of some sort?
-
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
