Custom alox?
-
Yes the 91mm file can be drilled out and fitted to the 93mm frame.
Now the pruner/electrician layer seems like a no brainer but... I've tried it (long time ago) and am trying to remember why it didn't work
It was either the kick sizes or blocking of nail nicks but I can't remember which :ahhh -
@Neil said:
... Now the pruner/electrician layer seems like a no brainer but... I've tried it (long time ago) and am trying to remember why it didn't work
It was either the kick sizes or blocking of nail nicks but I can't remember which :ahhhThat's one thing I want. it could make the perfect knife for me as a combo or a do it all. They do it on those fancy 91mm collectors, and the tools are available on the 93mm on different models at the right ends, so maybe if it really won't work it was a nail nick thing.... maybe with the right tools... since I think the small pruner is available on either end on 93mm knives and so it the sheepsfoot. Maybe there are different profiles for these that would allow the two in the same layer, because on Alox I don't want to give up the reamer.
-
Yeah, I work in telecom, and I think this would be a perfect pairing to a Cybertool Lite and/or a multi-tool for me. I thought about a customized Cybertool Lite, but decided that a custom Farmer might be a better option. I'd rather carry 2 knives that fit my hands rather than 1 that's too big. I hope we can figure out a way that this could work!
-
It could well have been a nail nick clearance issue as I remember I needed to retain the opener layer. However keep in mind that both those blades replace the can opener normally and the opener backspring isn't symmetrical so it could still be a kick issue :ahhh
I'll have to physically check.
-
pruner and electricians blade in the same knife is not a problem but it's not easily possible in the same layer.
You cannot exchange the bottler opener with a pruner or electricians blade. The nail nick would be on the wrong side.
-
So it was a nick access issue :D Thanks

-
How are the layers arranged on a Swisschamp XLT? Are the pruner and electrician's blade on the same layer? If so, is it possible to do a similar set on an Alox frame?
-
Yes, on the XLT they are on the same layer.
-

different frame of course :) If people
me towards the end of the week I'll see if I've got the parts to check this with :) -
I'd love to see you try, it might be instructive... :)
-
Can a Farmer with scissors be made?
Is so does anything need to be sacrificed?
-
@cerbera147 said:
Can a Farmer with scissors be made?Is so does anything need to be sacrificed?
There's a few of those knocking around :) No real issues. You drill out a 91mm scissors and its backspring and fit them into the 93mm frame. Additional liner and a bit of brass required. Action on the scissors will be acceptable but don't expect it to be as snappy as the tools that are designed to fit that frame.
-
Can a Farmer with scissors be made?
Is so does anything need to be sacrificed?
There's a few of those knocking around :) No real issues. You drill out a 91mm scissors and its backspring and fit them into the 93mm frame. Additional liner and a bit of brass required. Action on the scissors will be acceptable but don't expect it to be as snappy as the tools that are designed to fit that frame.
You can add snap using a brass tube around the brass pin. In this way the snap is as usuall.

-
I'd considered that but I felt that the snap was acceptable without and I must admit, I felt better not putting the additional strain on the backspring as it was already being employed in a role it was not designed for :) I'm probably just paranoid :D
Excellent picture by the way

-
@Neil said:
I'd considered that but I felt that the snap was acceptable without and I must admit, I felt better not putting the additional strain on the backspring as it was already being employed in a role it was not designed for :) I'm probably just paranoid :DExcellent picture by the way

This is Swiss quality
and this spring will stand forever... hopefully.... :D :D :D -
Ouch, yes of course it will, what was I thinking ;)They last forever.... or until some grubby Brit start shoving them in places they shouldn't go :D
-
@cerbera147 said:
Can a Farmer with scissors be made?Is so does anything need to be sacrificed?
Any excuse to show off my Scibeer mod. :D

-
Very nice idea with the extra bushing! I like snap. I noticed my EDC, probably an early scissor mod have no snap. I have some other thoguht hat seem to have more, not sure if they did anything special or it's just in the peening. I'm not sure if any have factory level snap.
-
Can a Farmer with scissors be made?
Is so does anything need to be sacrificed?
Any excuse to show off my Scibeer mod. :D

Nice

-
Did anyone come to the conclusion if the pruner/electrician blades from the XLT can be used in the same layer on a 93mm? What if they were in the layer behind the bottle/can openers or after the saw? can you get access to the nail nicks then?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login