New Leatherman Collection Photo
-
Freestyle's never appealed to me as they are like a budget version of the Skeletool. Although the more I see of them the more I want one :D
I did think the same for the Skeletool; for the same price I could get a full sized multi :ahhh Then I snagged one from Amazon for £45; money well spent

-
That's a little high but not too bad to get a Skele outside of the states. Did you go with 1st/2nd generation and ss or cx?
-
@sawman said:
That's a little high but not too bad to get a Skele outside of the states. Did you go with 1st/2nd generation and ss or cx?I got a CX 1st generation :D
I would like to get a CX with a plain edge blade at some point too. What do they sell for in the US? Full retail in the UK is £90 / $145 :o
How much does a Freestyle CX go for as well? Just out of interest of course :D
-
When society breaks down for whatever reason (pandemic?) and I'm stuck in the wilderness trying to survive would I rather have...
A bar of gold.
or a Charge TTi.
Hmmmm...
Steady on there lad!
The wilderness is the last place I'd try to survive when "the empire falls". For long-term survival, a community is necessary especially in colder climates. A good rural town with good soil and bottleneck routes in or out that could be roadblocked and guarded,would fare far better than a lone nut in the bush with a multitool. :)
Very correct. The fortress is finally COMPLETE and in exactly the type of community you describe.
My scenario is pandemic which means immediately into the escape rig with the family and off to any place where people aren't. Once I'm sure it's safe to venture off to the safe house, that's where we'll be.
And we'll be guarding it and its resources with much more than a few MT's. <grin>
Besides, you only need one or two MT's to make all the other tools you need. We've all seen Alone in the Wilderness correct?
If not, it's a great documentary - http://www.amazon.com/Alone-Wilderness-Dick-Proenneke/dp/B0009PUAFG/ref=sr_1_1?ie=UTF8&qid=1289145187&sr=8-1
But that's a whole different thread.... back to to topic.
BEAUTIFUL multi-tool collection. The fact that it's something Chako enjoys trumps all other "reasoning."
The funny thing people don't understand is when you reach the point where money doesn't really matter (meaning you have more than enough and don't have to worry about it) you look at things a little differently than most.
I've been what most would consider rich, I've been poor and I've been in between.
The most important thing is to enjoy what you do! Thanks for sharing Chako. Most of us don't care what your financial situation is - we just want to see the goods! :)
-
That's a little high but not too bad to get a Skele outside of the states. Did you go with 1st/2nd generation and ss or cx?
I got a CX 1st generation :D
I would like to get a CX with a plain edge blade at some point too. What do they sell for in the US? Full retail in the UK is £90 / $145 :o
How much does a Freestyle CX go for as well? Just out of interest of course :D
I've found a couple sources for the Skeletool CX 2nd gen. from between $60 - $70. Not sure about the Freestyle. Does Amazon charge fair shipping rates for international?
-
Nothing like stamp collecting to learn about geography, culture, and history. I was an avid philatelist with my mother back in the day. Come to think of it, we were equally into coins...so I guess we were also avid numismatist also.

I thankfully stopped doing both back in 89. I found I liked collecting FDCs instead due to the history written in the back of each envelope. I made an arrangement with a postal outlet back in 87. They put away one of each FDC that comes out, and I visit them 4 times a year to collect. I have been doing that faithfully since. I now have 10 books filled up. It is quite a collection...and I am sure it is worth quite a bit also.
Here, you can see the 10 FDC binders, and a very small part of the stamp collection.

Here is a quick example of an FDC.

Chacko, you have some very cool mini bear & sons but do you have any of the full size ones / ToolzAll?
Here you go. Taken today.

-
Pictures of your collection are always an opportunity to dream away ...
Hell, I know if I had the funds I would do exactly the same, so good for you ;).P.S.: Those FDC binders are also very impressive :o.
-
We should be careful fishing around in Chako's draws/trousers they are protected by a hair trigger spring loaded bone breaking(pun intended >:D :D)or is nut cracking
, Gerber Recoil. Proceed with cation people :D :D -
Nut cracking...I can confirm that!

-
Thanks for the Bear & Sons / ToolzAll , they're sweeeeeeet!

-
- Radio Shack Squirt E4
- Squirt P4.
- Squirt S4.
- Micra.
- Micra Special Edition Red, White, & Blue.
- Mini Tool.
- Mini Tool.
- Juice S2.
- Juice C2.
- Juice SC2.
- Juice CS4.
- Juice KF4.
- Juice XE6.
- Juice Pro.
- Skeletool CX.
- Skeletool.
- Freestyle CX.
- Freestyle.
- PST.
- PST II.
- PST II.
- Flair.
- SideClip.
- Pulse.
- Crunch.
- Kick.
- BO Kick.
- Fuse.
- BO Fuse.
- Blast.
- BO Blast.
- Super Tool.
- Super Tool 200.
- Core.
- BO Core.
- Surge.
- BO Surge.
- Original Wave.
- Wave.
- BO Wave.
- Damascus Wave.
- 25th Anniversary Wave.
- Charge Ti.
- Charge XTi.
- Charge TTi.
- Charge SLV.
- 25th Anniversary Charge AL.
- Charge AL.
- Charge ALX.
- BO Charge ALX.
- Charge TTi AP.
- Charge TTi 3D SEC.
- 25th Anniversary Sterling Silver Charge.
- Vista.
- Hybrid.
- Genus.
I still have on its way:
1- 20th Anniversary Wave.
1- Camo Blast.
1- Camo PST.
5- Camo Micras.
1- Camo Kick.
1- BO PST.
1- Super Tool 300.
1- Bo Super Tool 300.Whew. I think the Leatherman stuff is filling out nicely. I think when it all comes in; I may have a bit of fun taking a group shot.

I think I am quickly reaching the point where I can be content with the Leatherman side of things.

Have any close-ups of the Juicer Pro? Am curious as to where the tweezers went in at, and a closer view of the Can/Bottle Opener to Corkscrew to Foil Cutter arrangements are.
Someone mentioned on another forum that there didn't seem possible any room for both the corkscrew and the foil cutter. I suggested the foil cutter was folded in first, then the corkscrew after - like the saw and awl partnership.
-
Chako's cornered the multi-tool market and is driving the prices up!
That conveyer belt at Leatherman factory leads directly to your storage unit :D
If you were to recommend one LM to buy, which would it be?
edit: and why none of these in the collection? http://www.leatherman.com/argentum/collection/
-

You really should look at the other threads here ::)
-
I think I am quickly reaching the point where I can be content with the Leatherman side of things.
Oh god...whenever I read stuff like this in older postings...I just have to
myself and
. :D -
1- Camo PST
I didn't know there was such a thing as a camo PST ??? I look forward to seeing that one :D
-
Like a few others in Chako's collection, I would guess that PST is a regular PST with an aftermarket camo pattern added.
-
That is correct. There was/is a guy in Michigan who sells them occasionally on eBay USA.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
