How do you guys maintain your Swiss Army Knife?
-
@Reinier said:
There are different opinions on putting your SAK in the dish washer by the way. Victorinox advise against it :)There was an article on SOSAK about that. Someone tried that and it ruined the scales.
http://www.sosakonline.com/index.php?option=com_content&task=view&id=434&Itemid=35
-
There are different opinions on putting your SAK in the dish washer by the way. Victorinox advise against it :)
There was an article on SOSAK about that. Someone tried that and it ruined the scales.
http://www.sosakonline.com/index.php?option=com_content&task=view&id=434&Itemid=35
Thanks for the link!

By the way, my SwissTool has seen the inside of my dishwasher a couple of times and that worked very well ;)
-
The oil I use is one found in musical instrument stores. It is "key oil" for woodwind instruments, used to lubricate the moving bits on clarinets, oboes and the like. Works great on a SAK!
-
What do I do?
Absolutely nothing.
Just wash off any cack that gets on it as I go along.
-
That literally would be a case of removing cack as I went along

-
to clean: only hot tap water and nylon brush dry with soft cloth
oil: mineral oil

-
The Quote button is soooo 2009 :P
-
Soap and water and old toothbrush if it gets real dirty, air dry, then oil all the joints with Ballistol. Don't really oil the sides of the blade ect. as they don't seem to rust anyway, but do oil all the moving parts as I figure it reduces wear.
-
for knives i don't use, i oil them well with ballistol or vic oil and keep them in their boxes. for what i carry, i will clean it with soap and hot water from time to time, and put very little ballistol in the pivot.
-
Do you use WD 40 on the pivots or joints?
WD 40 dries to a gummy mess. Do not use Wd40.
Do you oil the blade?
nope.
How do you guys clean it the blades?
for spot cleaning: rubbing alcohol.
How do you clean the inner SAK if suddenly falls in mud?
rinse with hot water, dry with blow dryer.
How do you dry it?
blow dryer (see above).
What oils do you use?
Mineral oil on the joints.
Oh, and on a side note, do you guys just let your SAK blades and tools just snap back when closing? or do you guys ease it back in?
Ease the tools back in. Snapping a blade shut is not good for it and also increases the chance of me cutting the piss out of myself. Speaking of which, I saw a goober snap shut his SAK blade and he cut himself pretty good.
-
I treated my Climber pretty much as a piece of silverware that I washed in warm soappy water with a dish rag. I was amazed at how well the metals resist rust, although I did make an attempt to dry it afterwards. I don't use any oils as this knife may be used on/near food in some capacity.
-
@sawman said:
I treated my Climber pretty much as a piece of silverware that I washed in warm soappy water with a dish rag. I was amazed at how well the metals resist rust, although I did make an attempt to dry it afterwards. I don't use any oils as this knife may be used on/near food in some capacity.A tiny drop of mineral oil should be OK and will extend the life of the SAK
Alternatively if its washed pretty regularly olive oil or the like will also work OK. -
I have found some online sources for mineral oil if I cannot find it at my local stores. Thanks for that tip :D
-
I clean mine with dishing soap and oil them with Victorinox oil.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
