What Did You Use Your Multitool For Today?
-
LM Surge:
Used a hex bit from the bit kit to change my bicycle brakes. Used the pliers to remove the wheels, and the large flat-head screwdriver to remove the old tubes and tires and put new tubes/tires on.
Used the knife to cut the inner tube into strips, which I then wrapped on to my fixed blade knife sheath in order to attach stuff to it.
Then used an oily rag to wipe the grime and grease from the Surge and put it away after a little WD-40 and some oil.
--
Also adjusted the pivot screw on my LM Charge TTi so the main blade flicks open as fast as my Spyderco.
-
I used my Vic Climber to open some packaging :)
-
I've been using my Charge Ti to pull out staples underneath my sofa - I have taken the thing apart to reupholster it from the inside :D
New foam is stupid money!
-
Technically it was last night, okay.
I bought a set of wratcheting wrenches from Sears, and they were packaged with some pretty touch plastic. It was too touch for my c301 to cut through. I broke out the Crunch, but the plastic didn't make room for it's wire cutters to get in at all. However, the serrated knife of the Crunch sawed right through the plastic. That's a nice blade it's got there.
-
I used my CyberTool to cut a label off my shirt. And once again, I survived to tell my story :D
-
@turbov21 said:
Technically it was last night, okay.I bought a set of wratcheting wrenches from Sears, and they were packaged with some pretty touch plastic. It was too touch for my c301 to cut through. I broke out the Crunch, but the plastic didn't make room for it's wire cutters to get in at all. However, the serrated knife of the Crunch sawed right through the plastic. That's a nice blade it's got there.
Couldn't help it... :D





:D
-
-
I've been using my Charge Ti to pull out staples underneath my sofa - I have taken the thing apart to reupholster it from the inside :D
New foam is stupid money!
Urban Camo..?? ;) :D
Tempting :D
It's brown leather so that's best left well alone, I'm just giving it a good stuffing ;)
-
I've been using my Charge Ti to pull out staples underneath my sofa - I have taken the thing apart to reupholster it from the inside :D
New foam is stupid money!
Urban Camo..?? ;) :D
Tempting :D
It's brown leather so that's best left well alone, I'm just giving it a good stuffing ;)
Arh well, Brown leather is nice too.. :D
-
Technically it was last night, okay.
Couldn't help it... :D
You know, every time I open up a new multitool or knife with a multitool or knife I get a picture in my head of a caveman using a sharpened stone to cut into plastic: THE FIRST NEW KNIFE.
Great mental image :D
-
While someone mentioned packaging I'd like to say I like the new LM packaging very much, even though it is possible to re-seal it with some skill and return it to the store (not a good thing). The old clam packages used to take me several minutes to open.
And when it comes to the more difficult clam packaging, I sometimes use the kitchenaide sheers. They cut through anything

-
I opened the screw cap on a 205L drum of driptorch fuel. I suspect it was terrible for the tool but I really needed to get on my way.
-
Used my Wave to trim a rather overgrown Rose bush . The saw worked fine and used the pliers to drag the branches out of the way . Still got loads of scratches though :(
-
I used my MUT today to cut some barb wire, open some 15kg sacks of animal feed and tighten some bolts.....of yeah and clean my rifle!!!!
-
I used my Climber to open the mail.
-
Using the opener on my Scientist to depress the top of a can of air freshener was about it today.
This probably had a lot to do with all the snow round here at the moment. Most of the day was spent, sledging or shovelling.
-
-
Used the ST-300 to open my paycheck envelope.

Good thing I bought such a big tool or else I might never have gotten it open. ::)
-
@AncientMatingCalls said:
Used the ST-300 to open my paycheck envelope.
Good thing I bought such a big tool or else I might never have gotten it open. ::)

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login