Show us your flashlights.
-
My now fully-modded-out Techlite Lumen Master. The build quality on these flashlights is actually quite good, but the electronics are... difficult, to say the last. They also (stock) used a battery holder with 3AAAs.
Anyways, found a tub of the things at a local discount store, got two of them for $5 each as well as one of those $2 9-led specials. Turns out there are 4 different versions of the Techlite, one that uses an XR-E, one that uses a XP-E, and two versions that use an XP-C emitter. Anyways, I ripped out the tailcap switch and tailcap from one with an XP-C emitter, and modded the switch from the cheap 9-led special in to it. I also modified the existing smart clicky from the one with the XP-C emitter, removing a large spacer and making a spacer out of some high melting point plastic and using of the springs from the battery holder to make a low profile spring for the tailcap. I also did the same thing (spacer + spring from battery compartment) for the positive connection terminal as well, and made a battery spacer out of a tape-wrapped cardboard tube from a roll of paper towels. After having done all this I gained about 7MM of space in the battery tube, just enough to fit an 18650 battery inside without fear of crushing it.
Practical upshot, for ~$13 I got a 160 lumen, XP-E 18650 flashlight with a choice of either a single mode-reverse clicky flashlight, or a 3-mode (50%/100%/strobe) with a momentary tactical override. Changing the two is as easy as unscrewing and replacing the tailcaps. Since I think the "smart" tailcap has a vampiric drain issue, I keep the single mode clicky installed for emergency use, but it takes 3 seconds to switch them over if I'm taking the light out somewhere.
Oh, and six new Duracell AAAs as well.

I never do things the easy way, if that weren't obvious already.
-
I just saw these at Costco. $20 for a 3 pack (XP-E model).
Cool.
-
I picked up these two today. Both power up by AA batteries. The Lumapower I
got with the optional Teleforce head as well. Also had a very nice visit with
"Gunga" whom I received the Lumapower package from. Thanks Mike. :)

-
He he he...
Take a walk, let me know how you like it!
-
Let us know what you think of the E20 mate

-
Thanks Mike, tonite I will be taking it out for a first jaunt, I'll let you
know in a few weeks.
-
Yes, that it might. It's bright, light, and of slim profile. I'm sure would be very
easy to clip onto a bike somewhere and being an on, off, one stage clicky it's sure
not to be fiddly when you need it most. :) -
I was looking at one of those yesterday in shop. Nice little edc with good lumen
that one you have.
I'm pretty much sold on now going forward with mosty AA powered lights. I'm really
finding I'm not getting much more than expense, and lower runtimes with the cr/rcr123
setups. -
I think AA is the way to go too, as they just work out much cheaper to run compared to Cr123's, especially over on these shores.
-
Just bought a couple more Fenix lights. Love the E20 btw. Couldn't believe the throw
it has. Here are the new one's I'm awaiting, both powered by AA.

-
Sean, you are well and truly bitten by the light bug, aren't you? :D
-
Man, should have let me know you wanted that many more lights! I have a few I may let go...
-
Congratulations on becoming a true Jammie mate :D
-
@gunga said:
Man, should have let me know you wanted that many more lights! I have a few I may let go...Haha ;) Tell me what you've got you might let go? I'm into AA powered lights preferably
two cell units.Mike what is a Jammie? I tried the slang dictionary but didn't come up with anything
that made sense? :) -
Fenix LD20+, Mint...
R4 XP-G LED.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
