indestructable knives
-
That knife is a lovely looking bit of kit.
Heinnies stock a selection BTW.
-
Damn that's still a nice Ranger Dan

-
Them zombies don't stand a chance!
Or trees, they don't stand a chance either, but yeah, definitely the zombies.
-
Sadly , most indestructable knives actually suck as utility/cutting tools . For day to day life give me a Scandi , a Mora or a Vic. Pioneer . And before you ask , I have been there and done that .
Chris
-
Thanks for the suggestions for the Ranger, pleased to see they are available in the UK for not too unreasonable a price.
Any other suggestions, especially for such knives which can be purchased in the UK?
-
@Raukodur said:
Thanks for the suggestions for the Ranger, pleased to see they are available in the UK for not too unreasonable a price.Any other suggestions, especially for such knives which can be purchased in the UK?
Kabar USMC series! Damn near indestructible, and they've been in use with little change since World War 2.
-
Thanks for the suggestion of Kabar, the heavy bowie in particular looks very interesting, any experience of that?
-
@Raukodur said:
Thanks for the suggestion of Kabar, the heavy bowie in particular looks very interesting, any experience of that?Not that model. I had a powder-coated USMC short for a while. Somewhat obtuse angle on the edge as it's only half ground, but an extremely tough knife. Not expensive, either.
-
Hmm just happened on the D2 extreme, looks same as USMC but made from D2, and more expensive. Anyone have any experience of that?
-
Ok, I thought about what I wanted.
Basically my thought process ran that I want a knife that I can use for whatever I feel like, and I want it not to break. Putting it through crap will obviously ruin the cutting edge, but if it does not break or deform too badly, an edge can be put back on.
The knives I was looking at previously are all in the range of £100+. Some of them can take a lot of punishment. But then I can across this:
http://www.knifetests.com/ColdSteelKukriMacheteDestructionTest.html
The cold steel kukri machete.
Seems it can take a LOT of punishment, and is relatively easy to sharpen. But the thing that makes this shine is the incredibly low price. So low I don't think anyone would hesitate to use it in any situation whereas with the more expensive knives you may be tempted to spare them in the particularly rough jobs.
My thinking may be flawed, if you think so please do offer advice, I am a novice when it comes to knives.
Also, anyone who has experience of this, your opinion would be welcome.
-
Grant has one of those, and swears by it :)
I've had/got a few of CS's big blades, and although there quite expensive, they won't let you down

-
Amici,
I you were going to select the Kabar pattern, please check out the version produced by Case. It's a heck of allot better and stronger than either the Camillus or Kabar models, plus holds and keeps an edge much longer.. I still use mine that I carried in the Army back in the 1990's and the only modifications that I ever did was have the leather handle chemically treated against any type of rot, and the edge professionally reground from the not to bad but rough factory edge.Cheers,
Serge
-
That look's like it's in good nick for it's age

-
I dont like watching their videos, why would you try to bust concrete blocks with a knife? I have a becker bk9 that I have used for chopping wood and cutting tree limbs and havent even had to re sharpen it yet. Knives are ment to cut not bust concrete.

-
Those things look heavy. ::)
-
@jim guy said:
I dont like watching their videos, why would you try to bust concrete blocks with a knife? I have a becker bk9 that I have used for chopping wood and cutting tree limbs and havent even had to re sharpen it yet. Knives are ment to cut not bust concrete.
because sometimes when your chopping things you can hit stones/rocks or something harder than you intended and may want a blade that can take it and last.
any tool is intended for anything you see fit and want. some can do it, others can't.
it's why some people like "MULTITOOLS!" even in their knives ;)
-
For the indistructable knife, breaking wise, it usually takes a differentially heat treated blade to be able to hold an edge and still not break. That said, there is no perfect knife for all conditions of use.
The concrete block cutting will enable the testor to see what type of deformatin the blade will sustain when hitting rocks or other uncuttable substances.
I think I am probably the first person to have a knife used in a test of cutting a concrete block. This was done by Cliff Stamp and the link to the thread on bladeforums is http://www.bladeforums.com/forums/showthread.php?t=159731&highlight=ray+kirk+bowie
I have checked his web site and am unable to access it. I don't know if it has been deleted or he has a new one.
Any way, the concrete block cutting needed to be explained a bit as something other than just trying to destroy a knife.
Since there is no perfect knife for a knife user, I see nothing wrong with modifying any tool to suit the personal needs of its owner. I have been doing ever since I figured out how to use grinder. The main thing is to have the knife with you when it is needed. -
This is the point, roughly speaking, there are two properties of the blade, its cutting ability and edge retention, and its strength/toughness/abilities to take damage or punishment and not fail or break.
The first set of characteristics require a hard metal, but the downside to that is brittleness. The second set of characteristics require a soft metal, but the downside to that is poor edge retention and cutting ability.
Differentially heated/hardened knives mix the two to have the best of both worlds, from ancient katanas and real damascus blades (not pattern welded modern 'fake damascus' stuff) to modern day techniques like friction forging. So the cutting part of the blade is hard and holds an edge, and the spine is soft and gives the blade some flexibility and ability to withstand abuse (or as in the case of damascus, the metal itself combines these properties).
So 'indestructable' blades can either have a good edge which will cost a lot more, or have poor edge retention, but this makes them easier to sharpen, and cost a lot less. I would say the cold steel kukri machete, and most of the other blades mentioned here fall into the latter category, but I may be wrong, please correct me if so.
Would still be interesting to know how cold steel treat the metal they make the kukri machete from, I was rewatching the knifetests video for it the other day, I highly recommend it even though I know the dislike some members have for what he is doing with the knife, and the way it even cuts through the thick metal piping at the end, or bends at 90 degrees+ without failing is quite surreal or a £25 knife.
-
@WhichDawg said:
because sometimes when your chopping things you can hit stones/rocks or something harder than you intended and may want a blade that can take it and last.Accidentally hitting a rock is one thing, but intentionally chopping at a concrete block seems rather pointless.
That being said, if he has the kind of money to throw away on destruction tests for the sake of the destruction rather than the test, its his choice.
I just don't think that the tests he runs should be a final decision maker for anyone.What he does to knives is the equivalent of driving a Ferrari into a brick wall and expecting it to continue driving.
-
Your analogy doesn't work. A Ferrari in the knife world would be a knife advertised for being very sharp. The knives he tests are the equivalent of 4x4s, humvees, tanks etc, in the car/vehicle world.
So testing them by banging them into a brick wall isn't out of the question.
You watch Top Gear? Even if not, watch a clip on youtube about the Bowler Wildcat. Its not long, and the driver mentions the tests they run on that car and you can see why its relevant when you see the kind of use/abuse they put the car through.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login