One-Piece Tool Recommendations?
-
Think about what situations you use something makeshift (and sometimes wish you hadn't ::)). Find the keychain tool that fills that niche.
For me, the Atwood Funnybone has been the most useful. Rather than chew up the corners of a nut with pliers, I slip the Atwood on, and go at it. I prefer to use it to just hold the nut while I turn the bit driver (Phillips, standard etc), but I've used it to tighten loose nuts on motorcycles, bikes, and even repaired a couple of loose chair legs at Thanksgiving.

-
I have both the pocket wrench and the Artifact ::)
The pocket wrench is great if you are going to come across nuts, bolts and need a screwdriver bit holder (I keep one in my tool box)
The Artifact I have had on my car keys since February
I know some people don't like the blade on these, The blade is more a scalpel than a knife I carry it most days and I've never had a problem with it
Get both! :D
-
I recommend either a Pocket Tool X Snapper
or maybe you need a Raker Ring Tool
http://www.rakerknives.com/damascus_tools.htm
Both are similar to custom type quality and offering a feel that isn't cheap. I figure 21-29 isn't bad for a piece like these. -
You really may want to reconsider the Shard, it's quite useful and a great value for the money.
-
What about the CRKT Spare Tool?


http://www.crkt.com/Ta-Bar-Tool-Razor-Edge-Wharncliffe-Fixed-Blade-Pry-BarNail-Puller-Bottle-Opener
-
@cerbera147 said:
What about the CRKT Spare Tool?

http://www.crkt.com/Ta-Bar-Tool-Razor-Edge-Wharncliffe-Fixed-Blade-Pry-BarNail-Puller-Bottle-Opener
I really like the looks of the CRKT Ta-Bar. I want to put hands on one of those...

-
Snapper will be my next purchase.
I bought Piranha, Brewzer and Ti Minispoke from PocketToolX and I'm very satisfied with the quality and usefulness of these tools.
I also recommend Shard and Pocketwrench II. -
Shard & Pocketwrench are both good in-expensive choices..

-
I would definitely get the Shard. It's probably the best way to see if one piece tools are your thing without shelling out for the expensive ones.
-
@David Bowen said:
or maybe you need a Raker Ring Toolhttp://www.rakerknives.com/damascus_tools.htm
Both are similar to custom type quality and offering a feel that isn't cheap. I figure 21-29 isn't bad for a piece like these.I can vouch for the raker ring tool. I've hand one on my keyring for almost a year and I use it all the time. Cuts cardboard, fishing line, duct tape really well. The flathead has stoll up to light-medium use with not a scratch and I've used the oxygen wrench a few times as well. Sweet tool - the damascus one looks awesome too.
-
Without repeated the fine recommendations above, I'll add this one to the list:
http://www.heinnie.com/Pocket-Tools/Boker-Plus/Boker-Plus-Knives-Vox-Access-Tool/p-94-816-5776/
-
@ari6126 said:
I would definitely get the Shard. It's probably the best way to see if one piece tools are your thing without shelling out for the expensive ones.This is probably what I'll do. Cheap, and it will help me see if they will even be useful.
I do like the looks of the Snapper with the removable bit...
And this is cool too:
@nuphoria said:
Without repeated the fine recommendations above, I'll add this one to the list:http://www.heinnie.com/Pocket-Tools/Boker-Plus/Boker-Plus-Knives-Vox-Access-Tool/p-94-816-5776/
Too many choices! And I want them all :ahhh
And I swore I wouldn't get into these tools :ahhh :ahhh :ahhh
Thanks guys! >:D
-
**Too many choices! And I want them all :ahhh
And I swore I wouldn't get into these tools :ahhh :ahhh :ahhh
Thanks guys! >:D**
Your welcome. They dont call us enablers for nothing. :D
-
-
You need a GasBaby
.Everyone needs a GasBaby
.:D
-
Having had a Gassybaby, I'll stick with my Atwrench or Funnybone (and currently Poltergeist)
-
Glad to see you using the Poltergeist. I am loving my prybaby. I was painting my house and used it to pull nails/tacs, unscrew brass from hinges/ remove pins, and pry paint cans. I believe Peter designed the first incarnation while he was a painter (but I could be wrong).
-
@bhauer1 said:
Glad to see you using the Poltergeist. I am loving my prybaby. I was painting my house and used it to pull nails/tacs, unscrew brass from hinges/ remove pins, and pry paint cans. I believe Peter designed the first incarnation while he was a painter (but I could be wrong).Hey!
Merry Christmas! The Poltergeist is fantastic. I use it all the time at work. I'm glad the Prybaby is working well for you.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login







