Show off your Sak mod's!
-
@Neil said:
That was slightly embarrassing Gareth but thanks :DI'm not aware of anyone modding SAKs who has a press. I have various jigs made up for the different sized frames but its nothing fancy. Final assembly is accomplished by the age old art of peening. In the factory Victorinox obviously have nice big automated rivet spinners but as Ari mentions even they have been known to hand peen. I've had brand new knives where I suspect something didn't go quite right and one of the pins has obviously been hand finished. Not to say I wouldn't love a powered spinner but even second hand they are incredibly expensive.
I would encourage anyone to grab a few old SAKs and have a go at modding themselves. Some folks are naturals and take to it easily, others find they can never quite get it right. But its not like you need much in the way of tools to get started so its worth a crack

If you find modding isn't for you then send me a PM and we can discuss requirements and prices.
To save your blushes I'll point out that it takes you an awful lot longer to make a SAK than it does Vic. How's that? :D
In seriousness I do believe (despite what others have said ;)) that a hand built SAK is almost always going to be just that touch better than a factory made one, we've got the time to get everything 'just so'.
I'm not knocking Vic quality, far from it, I'm just saying that 100% is better than 99%. :)
-
LoL. fair enough

True though, and it fits the law of diminishing returns well. I once went to town on the action of an inline phillips as I wasn't quite happy with it; I became a bit obsessed and probably spent a couple of days on it. Was it worth it for perhaps a 15% improvement ... nope :D
-
Thanks a lot ari, Gareth, and Neil. You gave me a lot of good information. I've heard you can buy some airport confiscated Victorinox Knives in big lots for cheap. Maybe I'll check out ebay and buy some and just start messing around and getting a feel for it.

-
Hi all!
First post on this Forum; I actually joined this morning only :-[
I'd like to say I enjoyed all the mods showed on this thread; A wealth of ideas and eye candies!
Here's my modest contribution to this legendary thread: my first attempt ever at modding a SAK. I read the excellent tuturial by Gareth (thanks man; you made it sound so simple >:D you actually convinced me to give it a try :D)
I was looking for the "perfect" backpacking/hiking SAK and couldn't really get what I wanted in a tight package.
The Huntsman was close but was four layers (on the big side for my tastes) and has some "not so useful" tools in a wilderness environment (corkscrew, can/bottle opener, hook). Don't get me wrong; I find all of those very handy when "car camping", on a casual short hike, or at home, but not on extended hikes.Basically, I wanted the scissors, the saw, the awl/reamer, at least one blade, and the tweezers into the smallest package possible.
I got myself a used Camper (just for the saw) and a great shape Climber, and here's the result:





Specs: 91mm, three layers: Blades (big and small), Saw, Scissors. Reamer (only) on the back, and tweezers in one of the scales. Epoxied black paper micarta scales. 2.7oz, 16mm thick.
My climber is 17mm thick; I agree it doesn't sound like a big difference, but for some reason, it looks and feel considerably thinner:

(with Climber for comparison)Because there's no lanyard ring and no corkscrew, the knife is very comfortable in hand when whittling for an extended period.
All in all, I'm very happy with the result. I learned quite a few tricks doing this mod and I'm sure my next one will be better. I can't believe the amount of work that went into this little bugger...SAKs modding is not that easy!
It is a lot of fun, though, and very addictive :) I'm already looking for used SAKs to mod! -
That's great! I love the sleek looks and the tool configuration seems great for camping/hiking :) The scales are awesome as well

And welcome to the forums

-
Excellent work :D
It's extremely satisfying to make the SAK you need - I think you might be inclined to do another one though!
Welcome to MTO

-
What a great first mod.
You went above and beyond the scope of my "how-too", so hats off to you. 
Welcome to the forum.

-
Nice job! I especially like the black Micarta

-
Very nice mod, and welcome to the forums!
-
Great mod. I'm slightly confused though. Is the awl the same thickness as the corkscrew?
-
Welcome to the forums.
I love micarta. -
@ari6126 said:
I'm slightly confused though. Is the awl the same thickness as the corkscrew?They're not.
Awl on the pictured knife: 1.199mm
Awl on my 125th Anniversary Climber: 2.010mm
Different corkscrews I have: 2.451mm (old style with grooves), 2.453mm (new style), 2.452mm (new style).My spacer is not perfectly straight at the back of the knife (because of the 0.45mm difference), and I can feel a slight wobble in the awl. That being said, it is not more wobbly than what you have on a new knife.
-
Excellent work and welcome defaultuser..

-
That is gorgeous

-
What a great introduction to the forum :D Welcome aboard

A great mod and thanks for taking such clear pictures to show us what you've done

-
I'm slightly confused though. Is the awl the same thickness as the corkscrew?
They're not.
Awl on the pictured knife: 1.199mm
Awl on my 125th Anniversary Climber: 2.010mm
Different corkscrews I have: 2.451mm (old style with grooves), 2.453mm (new style), 2.452mm (new style).My spacer is not perfectly straight at the back of the knife (because of the 0.45mm difference), and I can feel a slight wobble in the awl. That being said, it is not more wobbly than what you have on a new knife.
Yep, I did a similar thing a while back and you can't really avoid the little bit of play you get. I don't go much for corkscrews so I tried setting it out like this:


-
That's nice Nurporia

Is it your work?
What is the wood and what is the 'rivet'/ highlight made from? -
Very nice work there mate

-
Not my handy work but it is mine :D :D :D :D.
Neil's Tache SAK he made as a fund raiser for Movember.
It is mighty cool & I am mighty lucky owning it :D :D. Shame I am currently tacheless :D :D.

Thanks Neil

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login