Black Camo custom titanium Charge scale finish
-
I decided recently to make my own black scaled titanium Charge after finding that obtaining an OEM black titanium Charge is challenging to say the least. My original intention was only to make black scales but after practicing a bit I decided to go for a camo pattern. Thanks to gadget guy I had couple extra Ti scales to practice on, Gadget is a great guy BTW.
I used an Epilog laser machine from work like the one here http://www.epiloglaser.com/legend_36ext.htm and some Thermark Laser marking material http://www.thermark.com/content/view/35/78/. We normally use the marking material for etching writing into metal objects, but I decided to try my hand at scale painting with it. The process is simple, you spray the marking material on the scales, or any metal, and then print the pattern form a PC using Corel Draw. Any of the areas that are hit with the laser will turn from gray to black and become permanent. During my testing I discovered that I can easily turn the scale all black after etching a pattern onto it in case I change my mind.
Well here are the results, I'm actually quite impressed with it. The finish is very tough and will not scrape off. I bet nobody has a Charge like this one!

Before shot. This is a modded Xti with the extra bit driver replaced by scissors.

This is the after shot, interesting huh?

A glamour shot.

**This is what the scales look like all black. **I did experiment with just hitting the titanium with the laser at high power with no marking material applied to the scale, and I found that I could darken the color of the titanium which was actually a pleasing effect. I will experiment with this later.
I will probably make an all black scale model next with the screw heads black as well. I like the look of the silver screws with this mod though.
-
WOW! :o
Robert
-
+1 Wow. Jeff, that is one of a kind! Great Job.

-
I'm super jealous of those scales

Great job! -
That's an amazing result Crouton..

Now we all gonna need Camo scales.. :P
:D -
That looks superb Crouton.

-
Whoa! :o That looks REALLY good!

-
That looks like fun :D
What are you going to do next? I'd love access to a laser 
-
Nice, now you guys juz make people like us with no access to laser jealous >:D
-
WOW :o That is so 8) Thanks for shareing that with us.
-
@Neil said:
That looks like fun :D
What are you going to do next? I'd love access to a laser 
My plan is to attempt to hit the whole scale with the laser at high power without marking material to see what it will look like. Then it's on to an all black scale model for my collection. I will post pics. Thanks guys for the comments.
-
I'm looking forward to seeing how this turns out! :)
-
Please link this to the custom MTO charge thread

-
Frickin' lasers, what can't they do? :ahhh :ahhh
Looks great BTW

-
Lovely job.... and yes we do all want a go on your laser :D
-
Wow that looks fantastic!
Lasers eh! Now if you could fit one on the head of a shark........... :D
-
Update - Here is what I did today:

Ready to commence.

Completely disassembled.

Scales ready to be modded.

The Epilog laser machine I will be using.

The computer that runs the laser.

The first pass I just hit the scales with the laser at low speed and full power with no marking material to see how it would turn out. This is the laser in action.

Here is one set of scales hit with the laser (top) and one set untouched (bottom)

This is all 4 scales hit by the laser. It makes for a nice rainbow effect but I wasn't happy with the uneven patina so I decided to go all black.

I added marking material, which is like a powdery paint, and cooked the scales again to turn them all black.

**This is what the mod looks like completely assembled. It looks great in person, this result is exactly what I was going for when I started this mod.
**
View My Video
A short video of the laser in action, this was taken during the first run without marking material.Afterthoughts: I did find that I had the power too high, or the speed too low, and actually warped the thin scales slightly (the non-leatherman ones). This ended up not being an issue once it was reassembled.
-
Damn, its so seldom everything turns out so well!

Great post, great photos, great project, great results!!

-
That's a great result Crouton and I'm guessing that the finish is as tough as old boots.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login