What Did You Use Your Multitool For Today?
-
this morning i used my charge tti to remove a plastic part in front of my honda silver wing 600 to replace the low beams with a couple of led....

-
I have been using my new Gerber MP450 all around the house and my grandmothers house since I got it on Christmas. Handy little devil!

-
A key broke in two inside the boot lock of one of our Opel Corsa vehicles.
-I used the flat bit and pliers to open (remove) the lock holding clip,
-flat bit to remove the circlip,
-miniature flat bit and regular flat to remove the lock opening cover,
-use pliers to cut wire and bend it to a L-shape, together with mini flat, to force key tip slightly and then pulled it out with tip of pliers,
-Pliers to replace lock cover and crimp it's edges
-pliers to replace circlip.So:
One tool for a complex job for the other guys who could only watch as they did not have a life saver, Leatherman! -
That is one Cool CyberTool!! It's tool selections make so much sense. I just wish Vic's pliers were as thin as the Wenger ones. Maybe they should borrow the Wenger pliers for their next CyberTool.
The watch caseback opener was a brilliant idea. I think Vic should take not of this tool configuration.
Since we have a bit-driver the only thing I would change is I would put a corkscrew on it to carry the mini screwdriver... Too bad they don't have a layer tool like the Wenger micro screw driver on the PTC.
-
Thanks for posting those pics! I love that CT. It's really awesome! I agree with ICanFixThat on he Phillips though ;)
-
that is the coolest cyber tool ever
-
-
Its a great configuration and is one of my most used SAKs. You can blame Gareth for it having a phillips on the back, he bullied me into it :P Obviously for this SAKs role a corkscrew is superfluous but the mini screwdriver would have been useful on occasion.
The file hasn't ever been used though and would be something I'd drop next time. That said you need something between the driver and blade really to make blade extraction easier. Tools that would be handy on it would be a magnifier and some kind of flat tipped light prying tool (bigger than on the back but smaller than a bottle opener.
The most used tool on it is the watch opener. In this age of sealed units its a must have tool and one Victorinox should seriously consider adding to their 91mm line-up.
-
@Neil said:
Its a great configuration and is one of my most used SAKs. You can blame Gareth for it having a phillips on the back, he bullied me into it :P Obviously for this SAKs role a corkscrew is superfluous but the mini screwdriver would have been useful on occasion.The file hasn't ever been used though and would be something I'd drop next time. That said you need something between the driver and blade really to make blade extraction easier. Tools that would be handy on it would be a magnifier and some kind of flat tipped light prying tool (bigger than on the back but smaller than a bottle opener.
The most used tool on it is the watch opener. In this age of sealed units its a must have tool and one Victorinox should seriously consider adding to their 91mm line-up.
Totally agree. Essential for all these high design concealed fastener cases.
-
I thought the file was great, but maybe that would have been more practical in the 80s and early 90s when there was more sheetmetal used.
As far as case openers go, I got a great new little Wenger a while back. I had not got around to photographing it until now, but the cool thing is it has a fixed blade. It looks like their regular Alox case openers, but it's a single layer from one piece of stainless steel. It's also a current model, and is often available on ebay cheap (with branding). I picked up one without any branding, including no Wenger logo.
Wenger Watchmaker 60
-
@Neil said:
Its a great configuration and is one of my most used SAKs. You can blame Gareth for it having a phillips on the back, he bullied me into it :P Obviously for this SAKs role a corkscrew is superfluous but the mini screwdriver would have been useful on occasion.The file hasn't ever been used though and would be something I'd drop next time. That said you need something between the driver and blade really to make blade extraction easier. Tools that would be handy on it would be a magnifier and some kind of flat tipped light prying tool (bigger than on the back but smaller than a bottle opener.
The most used tool on it is the watch opener. In this age of sealed units its a must have tool and one Victorinox should seriously consider adding to their 91mm line-up.
Oi! No passing the buck now, I didn't peen the thing together. :D
-
I took the Christmas lights down from the outside of the house last night. Just over the porch :)
I chose one of my newest arrivals to take on the job of pulling out the staples; Supertool 300 it was then

Did a mighty fine job as you'd imagine :D
-
working in the cafe, we have an apple custard cake that always looks terrible when you cut it into slices, as the top is very brittle and it just crumbles and breaks up under an ordinary knife. The result, for so many years we have been serving a cake to customers that looks like it was assaulted by the guy out of american pie :ahhh. I have my new spyderco ladybug on my keyring, and used that to cut the surface instead of the kitchen knives. The spider cut like a laser, and the surface did not crumble at all. My colleagues were completely in awe of knife and cake.
-
@Neil said:
Its a great configuration and is one of my most used SAKs. You can blame Gareth for it having a phillips on the back, he bullied me into it :P Obviously for this SAKs role a corkscrew is superfluous but the mini screwdriver would have been useful on occasion.The file hasn't ever been used though and would be something I'd drop next time. That said you need something between the driver and blade really to make blade extraction easier. Tools that would be handy on it would be a magnifier and some kind of flat tipped light prying tool (bigger than on the back but smaller than a bottle opener.
The most used tool on it is the watch opener. In this age of sealed units its a must have tool and one Victorinox should seriously consider adding to their 91mm line-up.
One more thing should be there, a blade from electrician... Just love that type, looks very handy...
Great CT matey... I must buy one (or few) and send to Neil's custom SAK's shop for overhaulin...

-
I actually tried fitting an electrician's blade in place of the main blade on that. It was close, <u>really</u> close but wouldn't quite fit :(
-
They'd be nothing to stop it going on another layer though, I just thought on that SAK the main blade would have been best being replaced with something smaller.
-
I used my supertinker to pry open a can of paint at work, then I used it's main blade to open mail.
-
How bloody lazy are people these days?
The foyer of my apartment building tends to be treated as a bit of a "dump site" where people bring stuff they don't want that's either outdated or sort of broken. Went down today and somewhat had tossed, no joke, a carbon fiber camera tripod. The legs were fine, the post was fine, it was just that somewhat had broken the panning head off of it.
So, five minutes with the lovely Gold TiNi Sog PPP, and I have a set of carbon fiber tripod legs, and I already have a good ballhead I can put on it.Edit: Well, my link's not working, but it's a re-branded Benro tripod. Anyone in to photography would know what that means.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login





