SOG tool list
-
@AndyTiedye said:
Is SOG the only one that sells individual tools for their multis?Yes that is the case unfortunately.
Furthermore, SOG instructs and encourages people in their User's Manuals to swap out blades and customize their multitools for specific needs.None of the other manufacturers do this. Leatherman and Gerber use special fasteners which discourage tampering, while Victorinox and others use permanent rivets.

-
The Leatherman forum had threads on obtaining the security torx screwdrivers,
and SOSAK has extensive tutorials on removing the "permanent" rivets and modding SAKs in general.
Does seem more difficult than it needs to be in both cases.In both cases, the only source of parts is taking apart other tools.
Not too much of an issue for SAKs generally, because they're cheap,
but could get costly for multitools.I could see setting up a multi without any blades, and carrying all the blades on a SAK.
It is usually a bit awkward to use blades on a MT compared a SAK or other knife, because
the knife is optimized for using the blades, while the MT is usually optimized for the pliers.Such a set-up would also be handy for travel, if you could end up with an airplane-friendly MT
while keeping all the sharp stuff on a SAK in the checked baggage. -
@AndyTiedye said:
The Leatherman forum had threads on obtaining the security torx screwdrivers,
and SOSAK has extensive tutorials on removing the "permanent" rivets and modding SAKs in general.
Does seem more difficult than it needs to be in both cases.In both cases, the only source of parts is taking apart other tools.
Not too much of an issue for SAKs generally, because they're cheap,
but could get costly for multitools.I could see setting up a multi without any blades, and carrying all the blades on a SAK.
It is usually a bit awkward to use blades on a MT compared a SAK or other knife, because
the knife is optimized for using the blades, while the MT is usually optimized for the pliers.Such a set-up would also be handy for travel, if you could end up with an airplane-friendly MT
while keeping all the sharp stuff on a SAK in the checked baggage.All very good points.
Aftermarket blades and readily-modified tools are one of the things I really respect SOG for.

-
Why can't I order a 1/4" socket drive in satin black?
-
-
-
@darkhawk said:
eodtech: I see your picture below your post is that a SOG? and why do I not see them on the catalogs, discontinued?That would be the highly elusive and most exquisite SOG ToolClip you refer to darkhawk. Link: https://wiki.multitool.org/tiki-index.php?page=ToolClip
A real sweetheart indeed, but discontinued for over 15 years now.

-
Is SOG the only one that sells individual tools for their multis?
Yes that is the case unfortunately.
Furthermore, SOG instructs and encourages people in their User's Manuals to swap out blades and customize their multitools for specific needs.None of the other manufacturers do this. Leatherman and Gerber use special fasteners which discourage tampering, while Victorinox and others use permanent rivets.

I dropped a note to Bear & Son about purchasing a saw blade for my 155L and received a reply the next day that, yes, indeed I could do so.
-
-
I bought a second power plier and realized there were variations in the full nose plier. I also got another paratool and was surprised to see the file came in three variations, round end, square end, and square end thinned like a screwdriver. I didn't know there were square ended files without being thinned at the tip.
Does any one have any more info about the plier head variations?
-
Allan has pictures of three plier head versions in the SOG Show-Off thread here:
(see the original post, as well as replies #2 and #28)
Did you find another variation Terry?

-
-
-
@J-sews said:
Here is a list of SOG multi tools that I am aware of:SOG ToolClip S23
SOG Micro ToolClip S28 (produced in black, red, yellow, and green)
SOG ParaTool S31
SOG ParaTool B31, black finish
SOG ParaTool S31YH, custom finished by David YellowhorseSOG Power Plier F65, full nose (catalog number later changed to S38)
SOG Power Plier B38, full nose, black finish
SOG Power Plier T52, full nose, Tini finish
SOG Power Plier S65, needle nose
SOG Power Plier B65, needle nose, black finish
SOG Power Plier T65, needle nose, TiNi finishSOG Pocket Power Plier S44
SOG Pocket Power Plier B44, black finish
SOG Pocket Power Plier T44, TiNi finish
SOG Pocket Power Plier, Deluxe S45
SOG Pocket Power Plier, Deluxe B45, black finishSOG SwitchPlier SWPL76
SOG Crosscut CC50
SOG Crosscut T50G, Tini finish
SOG Crosscut T50B, black TiNi finish
SOG Crossgrip CG55
SOG Crossgrip T55G, Tini finish
SOG Crossgrip, black finish (exclusive from AG Russel)SOG PowerLock S60
SOG PowerLock B60, black finish
SOG PowerLock T60, TiNi finish
SOG PowerLock S61 (EOD version)
SOG PowerLock B61 (EOD, black finish.)
SOG PowerLock T61 (EOD, TiNi finish.)
SOG PowerLock S62 (S60 with V-cutter blade)
SOG PowerLock S63 (S61 with V-cutter blade)
SOG PowerLock B62 (black B60 with V-cutter blade)
SOG PowerLock B63 (black B61 with V-cutter blade)New for 2007:
SOG PowerAssist S66
SOG PowerAssist B66, black oxide
SOG PowerAssist S67 (EOD version)
SOG PowerAssist B67 (EOD, black finish)
SOG PowerCut S68
SOG PowerCut B68, black finish
SOG PowerLock 2.0 S69~Bob
Thanks for the information.
-
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
