Show your slip joint's thread!
-
GG,
Nice one bud, CSC makes a good knife. And the Cannitler is a excellent pattern.
2xTap
-
Nice one bud, CSC makes a good knife. And the Cannitler is a excellent pattern.
2xTap
Thanks! What really sold me on the knife is the way you can get some purchase on the knife with one blade open, like shown in the video. I also like the fact that it used old barn wood from the 1920's. Being American made was just a bonus. :)
-
GG,
It's actually par for the course with the Canoe pattern. Standard Canoes are the same way. The pattern is naturally ergonomic. It's one of the reasons the larger Gunboat Canoe is my mainstay EDC......they just fit right and feel right in the hand.
And not only that, the Canoe pattern in all it's forms is very pocketable, particularly the standard size Canoes. They just disappear in a pocket. Not alot of makers offer a Cannitler, CSC is one of the few that do though. Of all the Canoe pattern slippies I own only one is a Cannitler.......

.........a Schatt & Morgan. Although unlike the CSC version, this one has nailbreaker backsprings.
2xTap
-
This past Christmas was the first in a long time I didn't get any knives. I even gifted to myself a new watch. But as my B-day is around the corner I figured some new slippies were in order. And SMKW's was having a 20% off their entire site sale going on and had lowered some of the prices on some Queen built stuff so it was perfect timing.
So I snagged me a Queen built Colonel Coon that I had been wanting, as well as two new Queen City offerings......with the sale and 20% off all three together costed a mere $80.00!



The first of the group (above) is the Colonel Coon. A Queen-built #40 pattern Gunstock at 3 5/8" closed. A while back I got it's larger brother in the Cattle King.....

.......these are done in polished smooth Autumn Gold Bone. The Gunstock, like the Cattle King, is also bladed in mirror polished 420HC with brass liners and pins, and nickle/silver bolsters and shield.

Fit and finish is perfect. Backsprings are stout, zero blade play throughout, backsprings rest flush with blades opened or closed, and not a gap anywhere. Blade grinds are even with sharp edges and the polishing on the entire knife is without fault.

A great addition to my ever growing Gunstock collection. :D
2xTap
-
Next up is the two Queen City pieces. These are from a new line done in less expensive finishes and handle materials to reduce cost. You can equate them to Case's Workman Series.
The first is another #40 pattern Gunstock at 3 5/8" closed.....


Second is a #41 pattern two-blade Copperhead at 3 3/4" closed.....


Both knives feature brush finished 1095 carbon steel blades, brass liners and pins, and polished nickle/silver bolsters. Neither of them has a shield.


Both knives are American made by Queen Cutlery, and as previuosly mentioned are of the Queen City series. And are marked as such.....


Both knives sport delrin scales, the Gunstock with jigged Yellow Delrin and the Copperhead with polished smooth White Delrin. Blades on both have clean even blade grinds with sharp edges, backsprings that rest flush with blades opened or closed, zero blade play throughout both of them, and both have a nice clean finish to them.
But they do have some minor faults. The Gunstock has stout backsprings but came with a few hairline gaps in the backspring area. And the center pin holes in the delrin on the Gunstock are a little rough around the pin on both sides of the knife. The Copperhead also has a couple minor gaps in the backspring area, but it also has what I consider light backsprings. They aren't weak, just lighter than I prefer.


But the faults are minor. Overall they are well built and solid. And considering they are American made, let alone Queen built, with a price of only $24.99 regularly.....these are exceptional buys. These would make superb EDC slippies, especially for those who prefer carbon steel in their pocketknives.
2xTap

-

I especially like the brushed steel finish. -
I had no idea Queen had a Queen City series in that price range. Pretty cool!
-
TFF,
They were released this year. Patterns are limited so far to pretty much just Copperheads, Gunstocks, Trappers, and Toothpicks.....some in delrin and some in wood, at least in this price range.
Check them out here: http://www.smkw.com/webapp/eCommerce/prodlist.jsp?Mode=Text&Brand=&CatalogName=&PriceStart=&PriceEnd=&Feature=&Cat=&SearchText=Queen+City&filter=false&range=1&list=48
2xTap
-
Nice haul 2xtap.
I`m really liking that Colonel Coon Gunstock. 8) :D -
I think I actually prefer the cheaper two
Both look to be nice and practical pocket knives 
-
David,
Thanks bud, yeah the Colonel Coon really stands out. It's F&F is outstanding.
Neil,
They are bud, some of the best you can get in this price range at that level of build quality.
2xTap
-
Just arrived on my doorstep, a trio of Case from SHC.......



Won these on auction as a complete lot, all #94 pattern Gunboat Canoes from Case's "Vintage Pattern Series".
Fit and finish of all three is excellent with zero gaps anywhere, heavy but not nailbreaker backsprings, virtually flawless mirror polish throughout, clean and even edge grinds, and all blades are sans any lateral play..........

All and all what I have come to expect from Case, and particularly with this pattern. And while my favorite slipjoint pattern it is one that is not the largest group in my collection as these tend to be pricey. At around $80-$100 a pop usually I only pick these up occassionally. Funny too considering all three of these came with the MSRP and retail stickers still on the boxes.......

All I could say was ....Ouch! But I paid nowhere near this for all three of these.

2xTap
-
Sounds like you got a bargain 2xTap. Thanks for sharing.

-
Gareth,
Yup, my cost was about $83 a piece. And thanks for looking.
2xTap
-
Those are tempting...
2xTap,
Your photos are awesome!

-
I decided to buy a few reasonably priced but interesting looking slipjoints about a month ago, which arrived during the past week or so.
Some canoes (the buck, last one, is the most attractive of the lot, the rough rider stag does not look "right" to me).
Also some more rough riders (the large toothpick looks and feels quite good), a few wengers (were on sale in a normal shop...) including an eloxy which I was not aware of before but which is impressive in its simplicity and a couple of mini buck toothpicks.
I was surprised by the fact that I had problems with the knives of two different companies, first time I had any real problem with any of their products.
The Rough Rider 6 blade stockman came with pathetically weak springs on the two larger blades (they work slightly better now after extensive cleaning) and a crack on the bone scales.
I noticed only the weak springs when I first got it and decided to keep it, even though the seller offered to take it back and then I saw the crack, but did not bother contacting the seller again. Based on what I read about this model on the internet I must have got the only problematic one.
???
The yellow buck mini toothpick came with both scales practically unstuck and discoloured and with oxidation inside. It seems like it was kept near some oxidising chemicals, maybe in a very hot and humid environment. I got a refund so I can’t really complain, I was just surprised that this was actually sold as new and theoretically checked before shipping..jpg)
-
dks,
Nice grabs bud. Sorry to hear you got a few lemons in that bunch though. That Stag Buck Canoe is sweet. The Stag looks that way because it's torched. Bear and Sons has done quite a few runs in torched India Stag and I've seen some of theirs look just like the Stag on that Buck.
2xTap
-
The Buck Canoe looks great. Does it have a spring for each blade or do they share a single spring? I like the kind that share one spring as they tend to be slightly slimmer.

-
Each blade has its own spring. They are about 12mm thick
These were bought unseen, so the stag "look" varies from one to the other, as shown in the pictures.
Quality is similar for all, that is, quite good, though the spring tension differs slightly between them, but it’s still OK.
The bone ones are thinner by about 4mm.
I have not really used any of them for anything but they feel solid. -
dks,
Nice pics bud. The Stag on all of those looks great, as does the F&F. I only have one of the imported Bucks, a 301. It's ok but I was disappointed in it as I have seen many others just perfect in F&F.
Might have to get me one of these Stag Canoes though.
2xTap
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login





