AA keychain lights.
-
Personally, I prefer a AAA for pocket carry if I'm at work. However, if it were the ONLY AAA device in the house, and I had other AA devices, I wouldn't hesitate to swap to a AA light for simplicity.
However, at home, I swap to a CR123X1 light due to higher output (better for farm work).
-
I highly recommend the Q-MiNi AA. It's very compact, has a good UI, runs great on NiMH and very powerful on 14500 Li-Ion.
-
I use a preon revolution (aaa) on my keychain, but have used the mini AA on it before and found the size acceptable. I'd use the mini AA, Itp,
Or Maratac AA on the keychain. They are almost identical in circuit, output and features. The differences are mostly in the body, tho the mini does have hidden strobe/SOS/beacon modes. The ezaa is okay, but I prefer the shorter length and circuit of the mini/Itp/Maratac. -
I only ever carry AAA lights on my keys and have a CR123 in my pocket.
-
Thanks for all the thoughts folks.
I think I'm now resolved to get myself one of the iTP A2's, the question being; do I go for the standard or the stainless version? 
The standard version is a touch cheaper and is only 22g. The stainless version is heavier at 47g (not to be ignored on a keyring perhaps) but has a slightly updated emitter; a XP-E R2 rather than a XP-E Q5. Are there really any major differences in these emitters other than a few Lumen (which surely can't be enough to detect with the eye)?
-
If you're going to keep it on your keychain, the stainless is way too heavy. Bad for car ignitions.
-
@jekostas said:
If you're going to keep it on your keychain, the stainless is way too heavy. Bad for car ignitions.A good thought but, luckily, I keep my car keys separate from my house keys (where I keep my torch) so isn't an issue. I am genuinely worried that the stainless will just end up feeling like a brick on my keys though, if it wasn't just so darned pretty I wouldn't even be looking at it.
-
I'd go for stainless. Much more durable whilst on your keys.
I have an ITP A3 in stainless steel. It has been bashed around my keys and dropped a few times, but still looks good.
I keep the light on a quick release clip so I can use it independently of my keys for sustained use.

-
Thanks for all the opinions folks.
I've decided to bite the bullet and have ordered up a iTP A2 in the stainless steel. I'm hoping the size and weight are tolerable on my keys, but if not then I can always just go with using the pocket clip. thoughts when I get my hands on it. :) -
Stainless is pretty hefty. Depends on if you like hefty. Note the newest Itps have r5 xp-g, but not every place sells them. Q5 to r2 is very little difference.
-
Got the iTP in a couple of days ago. I was a bit worried when I first picked it up as gunga is quite right in saying it's got some heft. Thankfully this seems to be less apparent when on my keys and dropped in my pocket, as always though YMMV. I'll maybe do a fuller report when I've used it some more but initial impressions are very good.


-
ive gone off the iTP since i found out its a twisty i like clickys
-
I'm heading into the city today and want to grab a first keychain light. I'm not
sure if I should get the LD15 or the LD01/ss, R5. -
My nomination goes to the LD01/ss. It's a tough light and I like the idea of having a medium mode. The medium mode would probably allow you to get more life out of a cell. The only drawback would be weight and size. The LD15 is obviously going to be lighter, and I think it's also shorter in length.
-
I think what put me off about the LD15 was the fact it didn't have that medium mode. :-\ I'm a big fan of my L0D (the predecessor to the LD01) so of the two my vote would be for the LD01 stainless. :)
-
Thanks for your thoughts. The LD15 is a bit larger than the LD01 but is lighter
being aluminum.
-
You could always just go for the standard LD01.

-
I could indeed go for just the standard one. There is only an $11 dollar difference
though to get the stainless. -
If you can get your hands on them then your decision is going to be a lot easier. :D The 39 hour run time on low with the LD15 really is appealing as well and 8 lumen can be more light than you think.*
*I'm not helping any more am I ;)
-
Yeah I can play before purchase because the shop carries the Fenix line. I agree
with you guys that having the three modes adds more versatility. I really like the
looks of the stainless.The advantage to the LD15 is I already have duraloops ready to go in AA.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login