buck multitools
-
Dennis
I think the swiss buck you posted is far nicer than the current ranger line. I own an alighni (spelling?) and mike horn but I think your swiss buck is amore useful multi, thinner, potential for more accessories, and cheaper. They should go back to it.Longbow and Sazabi, thanks for the info you have added.
-
And lets not forget about this fine bit of multi-purpose engineering: ::)
-
Bob
Why the rolled eyes, do you not like that tool? I know it never came to fruition but do you own a proto? -
@scrappy said:
Bob
Why the rolled eyes, do you not like that tool? I know it never came to fruition but do you own a proto?You should know better than to ask Bob that question.... he probably owns numerous! :D
Seriously, as I understand it, the Navigator never made it past the prototype stage, and the few that did get out were very poor quality.
Def
-
Buck makes (or sells) the nicest china made multi I have handled
-
@Grant Lamontagne said:
Bob
Why the rolled eyes, do you not like that tool? I know it never came to fruition but do you own a proto?You should know better than to ask Bob that question.... he probably owns numerous! :D
Seriously, as I understand it, the Navigator never made it past the prototype stage, and the few that did get out were very poor quality.
Def
Def
Thanks for the info. I assumed they were well built -
Bob will be along eventually to describe them in more detail I am sure, but I seem to recall seeing one at some point- perhaps at the Maine Meetup 2 years ago? I remember being very unimpressed by it, which is a common reaction to multitools from that era. In those days manufacturers put out any old thing they could produce just to be a part of the growing industry. There were more tools discontinued in that few years than any other as many others, like the Kershaw a-100 and Coleman ProLock failed.
Even leatherman produced some boners at that point- Flair anyone? :D
Def
-
@Grant Lamontagne said:
There were more tools discontinued in that few years than any other as many others, like the Kershaw a-100...Even leatherman produced some boners at that point- Flair anyone? :D
Def
Poor A-100; I did rather like mine. :/ As for the Flair, it does kinda live on in the form of the Juice Cs4.
The awl could be used as the cocktail fork, and the blade could be used as the pate spreader. ^^;Still isn't an excuse for them to discontinue the Sideclip, PST, PST II, or KF4, regardless of whether or not they had "updated" versions of them.

-
I am wanting to get a Buck Navigator (pictured in previous post) for my collection/display. I handled the Navigator this summer, that a collector had (he would not part with it). It was rather difficult to close as the pliers poked threw the bottom of the handle when closing IIRC. I had to press every thing together to get it to the folded position.
Here is another discontinued Buck tool. The Hitchhiker (made in Japan) The knife blade is closed in the picture.

-
The Navigator prototypes are pretty bad alright. Lots of sloppy floppy blades, and a real pain to fold up properly. :P
Still and all though, they are only prototypes. It seems like Buck could have stuck with the project and improved them to the point of release. :-\
-
@THE_LONGBOW said:
I am wanting to get a Buck Navigator for my collection/display. I handled the Navigator this summer, that a collector had (he would not part with it). It was rather difficult to close as the pliers poked threw the bottom of the handle when closing IIRC. I had had to press ever thing together to get it to the folded position.Here is another discontinued Buck tool. The Hitchhiker (made in Japan) The knife blade is closed in the picture.

For those who can't quite afford the luxury of the Metro? :D

Def
-
Here are some of Buck Knives collaboration with Peter Whittaker. These are more on the knife side of things. I like the design of the Revolution it is different.
Top tool is Summit
Middle and Bottom are Revolution
-
And here's one of the 360CL model (pocket clip) :)

-
This thread makes me feel a sense of melancholy over the Bucktool 360 that I bought from Spoonrobot that needed repair. I sent it off to Buck and they replaced with an Xtract 730 platinum.
Buck warranty replaced a Bucktool 360 with an Xtract 730
I sent off a Bucktool 360 that had one handles tools that wouldn't lock. I was hoping they would repair it. Instead they replaced it with an Xtract 730 plat...
Multitool.Org Forum (multitool.ninja)
What a bummer that was, I wish i still had that thing. Haven't been able to find another one since.
-
@Crouton said:
This thread makes me feel a sense of melancholy over the Bucktool 360 that I bought from Spoonrobot that needed repair. I sent it off to Buck and they replaced with an Xtract 730 platinum.
Buck warranty replaced a Bucktool 360 with an Xtract 730
I sent off a Bucktool 360 that had one handles tools that wouldn't lock. I was hoping they would repair it. Instead they replaced it with an Xtract 730 plat...
Multitool.Org Forum (multitool.ninja)
What a bummer that was, I wish i still had that thing. Haven't been able to find another one since.
It is unfortunate you had a bad warranty issue with Buck. As with any factory they will replace a discontinued item with a newer model, that may not be of the same style.
My experience with Buck Knives on old or collectible items is to send a note with the return or phone or email some one at the factory in advance.
If you do this, you hopefully will know what you will get as a replacement or if your item may can be repaired.
If I had seen this when it happened I would have urged you to call the factory. (I see in your previous thread people mentioned this) I even may have been able to give you a name of who to contact. If you are still looking try Ebay the come up there from time to time. (Just be willing to out bid me :D )I had a similar situation with Kershaw on a discontinued model of knife. It was a wood handled folder and I got a rubber handled folder. How ever I liked the new knife better than the old model.
-
@THE_LONGBOW said:
It is unfortunate you had a bad warranty issue with Buck. As with any factory they will replace a discontinued item with a newer model, that may not be of the same style.Don't get me wrong it wasn't a warranty issue really. It was more of an incorrect assumption (that they would repair a damaged tool) and poor decision on my part(to accept the Xtract as a replacement for the Bucktool). The Buck warranty folks did their job, and they did it quickly and efficiently.
When I originally sent it in I was assuming and hoping that they would just fix the tool, as it had a problem with the implements not locking on one side. When I received the Xtract I just didn't care for it but I figured I'd be able to find another Bucktool one day at a reasonable price. I've been searching but I haven't found a suitable candidate that had the wire stripping notches on the file and was reasonably priced.
I'll get one eventually, I'm in no hurry. This thread and the great pics of Bucktools in it have rekindled my wish to own one though.
Nice collection Longbow.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login