Leatherman PST chronology project
-
Ah, I see. All three of my PSTs have the older "Pivot in" style then.
Working on getting some photos of the three I have. I noticed that the two Type 7s that I have are practically identical, except that one (as mentioned earlier) has an F stamped on the tang of the Phillips driver, and the other one (now that I'm home to take a look at it) instead has a "2". They otherwise appear identical with the exception of a slight difference in the shape of the plier jaws (one is just slightly more angular than the other).
Anyhow, I'll have pictures up for those major differences between the Type 5 and Type 7.
-
Alright, I have a few photos. Sorry for the poor quality, but I haven't got great lighting conditions for an impromptu shoot and had to use the camera on my phone, as I can't seem to find my "real" camera...
Anyhow, here's what we've got.

First off, a comparison of the casings. You can't see the top one very well, but it's the Type 7, and below is the Type 5. If you look closely, notice that the trademark line dropped the " 'D" from "REG'D". Also, the Type 5 doesn't have the "PORTLAND OR" stamp.

Okay, second: notice the shape of the pliers. The outside of the jaws is smooth on the Type 7 (left) but very angular on the Type 5 (right).

A few things here.
First: Notice the stamp on the bottom of the file on the left (Type 7). It's absent on the Type 5 (right).
Second: Notice the patterning. Both tools are oriented the same way, but the orientation of the files is reversed. On the Type 7, when oriented like this we see the cross-pattern side of the file. On the Type 5, we see the one-way pattern. Each file has the opposite pattern on its reverse.
Third: Notice the size of the thumbnail grooves. The Type 7's are about half the size of the Type 5's.

This is a picture of both PSTs I have that I believe to be Type 7s (the Type 5 is not in the photo). This is a closeup of both of the Phillips screwdriver bases. Note that one has an "F" stamped on it, and the other a "2".
I'm not sure what the markings on the Phillips screwdriver mean. Does anyone have any idea?
-
@WH867 said:
Instead of listing everything I just took a few comparison pics. The one that is dated is # 0495.I just realized that in this post (two years ago), WH847 posted pic for pic EXACTLY what I just took pictures of. X.x...
Except for the phillips screwdrivers.
I also noticed one distinct difference, however. My Type 5 says "US REG'D...", but his lacks the "US" part.
That suggests that there may be two "Type 5" tools: one with "US" and one without.
EDIT:
I can't believe I never saw it for all these years AND missed it when I was looking closely earlier today: My Marlboro Country Store edition PST DOES have date codes: 1294 on one side, 1094 on the other. The other USA PST that I have does not have date codes (I looked this time) meaning they ARE different models after all. So, to revise, I have...
PST Type 5
PST Type 7
PST Type 8I've noticed that both my Type 7 and Type 8 say "US REG", not "US REG<u>'D</u>". Any idea when the 'D was dropped?
-
hay i just got my first PST 2, I know I know but better late than never
Well thanks to this post I found it was a tenth version and from 96
thanks
i took her appart to clean and buff and got it moving real smooth.
I love the size its really quite compact.
anyhow thank for helping me learn what kind I got!
I actually like this version alot says leatherman tool, metic/imp scales, simple clean looking says USA and not all ground out. 0496/0496, blade has i believe saber with a searated bottem half. score. lucky find!peace
Oh and I called leatherman to ask about a new knife and they said if i send it in ill get a blast in return and there is no parts there to maintian mine. In Canada anyway.
-
@darkhawk said:
hay i just got my first PST 2, I know I know but better late than neverWell thanks to this post I found it was a tenth version and from 96
thanks
i took her appart to clean and buff and got it moving real smooth.
I love the size its really quite compact.
anyhow thank for helping me learn what kind I got!
I actually like this version alot says leatherman tool, metic/imp scales, simple clean looking says USA and not all ground out. 0496/0496, blade has i believe saber with a searated bottem half. score. lucky find!peace
Oh and I called leatherman to ask about a new knife and they said if i send it in ill get a blast in return and there is no parts there to maintian mine. In Canada anyway.
wow, blast from the past. FYI, darkhawk, that GoogleDoc hasn't been updated in a VERY long time. I started to try to record the changes, but realized that the components don't necessarily follow an easy chronology. I don't recall where in this thread it's stated, but I believe that someone from Leatherman did affirmatively say that the various tools could have been used/introduced at any given year.
-
oh interesting
ya total blast from the past I put an add on Kijiji looking for used leathermans and this was what i got. HA I actually really like it
Took her all apart cleaned it, got t looking great and the only damage it had was the blade i think was sharpened with a file or on a brick, but i got a decient edge on her so far. part of the charm of a used old tool.
As for the google doc thingy ya no porb i was not sure what it was fully but thought why not fill it in, people alwasy say search things before posting.
ok peace :) -
this is like mine and it's date is 0395

-
Today I received what I think is a PST II that I purchased on eBay, but I was under the impression that PST IIs had always had a "PST II" logo on them. It has all of the tools that the PST II is described as having.
Also, curiously, it is stamped with logo and trademark information on both sides, unlike the three PSTs that I own.
Both scales feature a date code of 0196.
Can anyone clear up my confusion?
-
At first the PST II's received the same exact handles as the regular PST's. It was only later that they got there own special handles stamped PST II :)
-
Cool. :) Thanks.
I'm pretty pleased, as I got it for about $16 from eBay. It wasn't listed as a PST II, which is why I suspect it didn't go any higher. It's in pretty rough shape, though. The large slotted screwdriver is twisted up (but still fits in the scales fine) and the small one is broken off. The scales are also very loose, but I should be able to tighten them up alright. With a little work maybe I can straighten out that screwdriver and grind down a new tip onto the small one, like I had to do with my first PST...
-
Nice group there Kender.

-
Thanks!

-
Hay
I love this PST, 10 doller investment bit of effort in cleaning it up!
ok sure its not a great pic but i have it all cleaned up no rust or crud!
the blade was real bad and i have to spend a little longer in it but its close!The pliers where bad to all mangled i worked them nice and square, the blade was sharpened with a brick im convinced and the were stained and gunked up but now im loving them.
Oh and my pliers have usa in them but I read and saw some did not like are roughly ground out. why i could not find it. I would be so annoyed if that was my tool!
peace
-
That there appears to be a PST II, friend. Very nice for $10! Looks like you've done a pretty good job of cleaning it up.

-
Oh ya sorry it is a PST II
It has come along very nice!Next is a sheath
-
Hay
excuse my ignorance but why do some PST's have the USA ground out?
Thanks -
@darkhawk said:
Hay
excuse my ignorance but why do some PST's have the USA ground out?
ThanksIts because some parts were made outside the U.S , and a California Court descision ruled they could no longer have U.S.A on the tools . Despite the tools being 100% assembled in America . Heres a quote from the Leatherman Website going into more detail .
May, 2005, Portland, OR—A Los Angeles Superior Court judge has found that between April of 1997 and April of 2002, Leatherman Tool Group, Inc. violated a unique California law concerning the ability of companies to represent their products as “Made in USA.” The court in Colgan v. Leatherman Tool Group held that under California law Leatherman engaged in false or misleading advertising by representing that certain of its tools were “Made in USA.” As a result, the court directed the company to pay approximately $13 million in restitution. Leatherman is disappointed with the ruling and intends to file an appeal.
A recent Associated Press story about the ruling gave the distinct impression that Leatherman brand multi-tools are, for the most part, made outside the United States. This is false.
The unique California law at issue prohibits companies from selling in California any product represented as “Made in USA” if “any article, unit, or part” of the product was “substantially made, manufactured, or produced outside of the United States.” As interpreted by one California judge, the law prohibits a “Made in USA” representation of a product even if the only foreign content in the product is a single screw.
These Leatherman tools were all built and assembled by U.S. workers at U.S. factories using primarily parts made entirely in the United States and some parts processed, in part, in Western Europe, Mexico, or Canada. Unfortunately, Leatherman is not able to procure all of its component parts in the United States because of quality, technological, or economic considerations. But Leatherman Tool Group has never shipped a job overseas, and the company remains committed to keeping and creating as many jobs here as possible.
“As proud as I am of the invention of the Leatherman tool, I am even more proud of the hundreds of American jobs I have created,” said company founder and president Tim Leatherman. “I am disappointed in the court’s ruling for a number of reasons, but I am especially disappointed that the court disregarded a ruling issued by a federal judge in 1997 stating that our representation that the Leatherman PST tool was made in the United States was ‘neither false nor misleading.’”
Hope this helps .
Dunc
-
Hay great
thanks alot! :D -
wonder who Colgan was in Colgan vs Leatherman Tool Group?
-
@Pacu said:
wonder who Colgan was in Colgan vs Leatherman Tool Group?It was a class action suit, so "Colgan" was probably just some average Joe who bought a Leatherman tool. Then some ambulance-chasing scumbag of a lawyer saw a way to make a bunch of money off a trivial thing that wasn't hurting anyone. They sue Leatherman on behalf of all the hundreds of thousands of Californians who had purchased Leatherman tools, represented by this individual named Colgan. The judge rules in favor of "the people", Leatherman pays a huge fine, the scumbag lawyers takes their inflated fee out of the settlement, and the hundred thousand people they represented each get 7 dollars and 32 cents* (or some such nonsense) >:(
*no actual facts here, just my cynical guess as to what really happened >:(
Bob---->
<------lawyers
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login